Lead2Amazon

1/4 INCH IRRIGATION TUBING: Create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system; for trees, shrubs, flower beds, groundcover, vegetable gardens, and planters

CONNECT TO DRIP IRRIGATION PARTS: Connect to main supply line with 1/4 in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant

EASY TO USE: As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated; Tubing coil comes shrink wrapped for convenience; easy to access as needed

BUILT FOR DURABILITY: Constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content

SPECIFICATIONS: Comes with one 100 ft. coil of ¼ in. poly supply tubing; Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in.

HOW IT WORKS: Branch off the main supply line to create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system

WATERS A VARIETY OF AREAS: Transport water to a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets

CONSTRUCTED FOR DURABILITY: Vinyl tubing is constructed with 100% virgin content for durability

HOW TO EXTEND THE LIFE OF YOUR TUBING: Once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting

SPECIFICATIONS: Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in.; connect to main supply line with ¼ in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant

You Will Receive: The 1/4 inch irrigation tubing is 100FT (30M) Irrigation Hose with 2 pack 6-Way Connectors and 20pcs 1/4" Tee Splitters and 20pcs 1/4" End Plugs.Sufficient quantity to meet your diverse garden watering needs where you need it in a wide variety of planting areas

Perfect Size: This drip irrigation hose designed with an inner diameter of 4mm and outer diameter of 7mm, this 1/4" drip irrigation tube is thick (3mm) and offers double explosion-proof protection to prevent accidental leaks or bursts due to pressure changes.It is suitable for year-round use in any weather condition

Easy Installation: Simply cut the 1/4" tubing into your desired length and connect to barbed Fittings, emitter stream, emitter vortex or misting nozzle. Flexibability allows for tighter turns and fewer elbows for quick and easy installation in gardens, flower beds or other landscaped area. You only need to turn on the switch to irrigate all the plants, saving time

Durability & Flexibility: Put the tube into a cup of hot water for 10 seconds before assembling. Connect with most 1/4-inch irrigation drippers, drip irrigation emitters or drip irrigation parts. Material light, good toughness,can be very good to save other pipe fittings. Suitable for small, dense planting areas and areas with many bends

Wide Application: Garden irrigation system kit can be used as the main line of a small irrigation system or as a branch from a larger pipe to a small irrigation system. Such as automatic plant watering system, garden irrigation system, sprinkler system and greenhouse.Suitable for overground or underground installation

1/2 INCH IRRIGATION TUBING : This 1/2 inch drip irrigation tube is designed as the main supply line connected to low-flow drip irrigation systems. It serves as a feeder branching off from larger pipes or tubes to deliver water to various drip irrigation components. Compatible with other irrigation accessories, it ensures efficient watering for your plants.

PRODUCT DIMENSIONS : The irrigation hose 1/2 inch has an inner diameter of 13mm, an outer diameter of 16mm, and a wall thickness of 3mm. It features dual-layer explosion-proof protection to prevent accidental leaks or bursts due to sudden pressure changes.

YEAR-ROUND DURABILITY & FLEXIBILITY : Made from layered polyethylene, the irrigation tubing 1/2 in is constructed with an outer layer resistant to sunlight and an inner layer exposed to water. Composed of 100% virgin materials with a recycled middle layer, it offers UV resistance and is designed for both underground and above-ground use. Its flexibility allows it to easily adapt to tight curves or corners in planting areas.

EASY MAINTENANCE : The drip irrigation system parts 1/2 inch tubing is simple to assemble and use. Cut the tube to your desired length and integrate it into your garden irrigation system to provide effective watering. Branch off with 1/4-inch irrigation tubes and connect them, expanding your irrigation area immensely.

PACKAGE CONTENT: 50 feet of 1/2-inch drip irrigation tube, 2 X 1 /2" straight connector, 2 X switch valves, 2 X T Connectors, 4 X 1/2" to 1/4" Tubing Reducers, and 20 X cable zip ties. Create a high-quality watering system for your garden to enhance plant growth and make garden care more enjoyable.

3/8" tubing 100ft designed for use with all drip system. Suitable for 20-25 square meters of irrigation area

Constructed from corrosion resistant, UV resistant polyethylene materials. No kinking design

60 psi rating exceeds competitors specs. Can be installed above or below grade

Great textured finish for easy unroll or stake in garden, lawn, patio, greenhouse

Compatible with all 3/8" transfer fittings and all barbed outlet ports

▶ 1/4 𝐈𝐍𝐂𝐇 𝐈𝐑𝐑𝐈𝐆𝐀𝐓𝐈𝐎𝐍: Irrigation tubing is a flexible tube made from polyethylene material that is used to transport water from a water source to plants, crops, or other areas that need to be irrigated. It is commonly used in agriculture, landscaping, and gardening to provide a consistent and efficient supply of water to plants.

▶ 𝐂𝐎𝐍𝐍𝐄𝐂𝐓 𝐓𝐎 𝐃𝐑𝐈𝐏 𝐈𝐑𝐑𝐈𝐆𝐀𝐓𝐈𝐎𝐍 𝐏𝐀𝐑𝐓𝐒: Connect to main supply line with 1/4 in. micro fitting. connect other end directly to emitter to deliver water to plant. for trees, shrubs, flower beds, groundcover, gardens, plants in pots, and planter boxes.

▶ 𝐄𝐀𝐒𝐘 𝐓𝐎 𝐔𝐒𝐄: Irrigation tubing is an efficient and cost-effective way to deliver water to plants and crops, reducing the amount of water waste and ensuring that plants receive the right amount of water they need to grow and thrive.Tubing coil comes shrink wrapped for convenience.

▶ 𝐅𝐎𝐑 𝐃𝐔𝐑𝐀𝐁𝐈𝐋𝐈𝐓𝐘: Irrigation tubing comes in different sizes, lengths, and thicknesses to suit different irrigation needs. It is typically made from high-quality, UV-resistant materials that can withstand exposure to sunlight and harsh weather conditions. Tips: Put the drip irrigation hose into HOT water, for 10 seconds before assembling.

▶ 𝐅𝐎𝐑 𝐌𝐔𝐋𝐓𝐈𝐏𝐋𝐄 𝐎𝐂𝐂𝐀𝐒𝐈𝐎𝐍𝐒: Irrigation tubing is a versatile product that can be used for multiple occasions, including: Agriculture, Landscaping, Gardening, Greenhouses, Sports Fields and so on. providing an efficient and cost-effective way to deliver water to plants and crops.

Packaging Includes: you will receive a 1/4 inch blank dispenser drip hose with a total length of 492 feet, built in 0.5 GPH emitters 6 inches apart, compatible with most brands of 1/4" barb accessories, point watering emitters, sprays and more than enough to meet your watering needs

Reliable Materials: drip hose made of PVC material, reliable and durable, not easy to fade or break, easy to wrap around plants or under soil without damaging garden areas; It can continue to work in bad weather, or it can be buried underground or placed in an obvious place, which will not affect plant growth

Easy to Install: soak the drip irrigation pipe in hot water for 10 minutes before use, and then connect the nozzle to the pipe mouth and nozzle socket; It can be cut into different lengths according to actual needs, especially suitable for underground or above ground installation

Water Saving and Time Saving: this type of pipeline is very flexible and easy to use, which can help you quickly and effortlessly deliver water to where it is needed; Its 6 inch outlet spacing is very suitable for elevated gardens, farmland, greenhouses, as well as neatly arranged plants in flower pots and flower boxes

Widely Applicable: our 1/4 inch drip irrigation tubes are ideal for small, narrow and tight growing areas, as well as areas with narrow curves or multiple turns, for flower boxes, window boxes, densely planted or narrow areas, vegetable gardens, or wrap them around roses, shrubs, trees, gravity feeding systems

Effortless Installation: Easily tap into the side of the tubing with barbed drip emitters and 1/4" tubing, ensuring a direct and efficient water supply to your plants

Simple to Cut and Connect: No need for digging. This drip irrigation tubing is easy to cut and connect, allowing you to customize your irrigation setup without hassle

Flexible and User-Friendly: The flexible design makes installation a breeze, adapting to the contours of your garden for optimal coverage

Kink and Leak Resistant: Built to last, this tubing is resistant to kinks and leaks, ensuring a reliable and consistent water flow

Versatile and Discreet: It can be easily staked and covered with mulch, blending seamlessly into your garden while providing essential hydration to your plants

Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas

Use as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering devices

Textured finish improves handling; making connections faster and easier

Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage

Unique Micro-Porous design creates an ultra-tight connection

Compatible with most brands of 1/4" Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays

Designed for underground or above-ground installation

Tubing specifications: outside diameter 0.25", inside diameter 0.17", wall thickness .04"

Operating pressure: 0 to 70 psi

Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas

Professional-grade; won't clog and requires no maintenance

Connects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits)

Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage

Self-dispensing coil reduces layout time and speeds installation

Unique Micro-Porous design creates an ultra-tight connection to fittings

Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes (sold separately)

Tubing specifications: 0.634" outside diameter, 0.536" inside diameter, 0.049” wall thickness

Operating pressure: 0 to 70 psi