Lead2Amazon

PACKAGE INCLUDE: there are 2 pack 1 inch solid spinlock collars in the box, exactly fit your 1” standard weight barbells and dumbbell, strong and sturdy enough, so you need not worry the barbell comes off, very convenient and be at ease

SUPER MATERIAL: each of them is made of high end steel and upscale black plastic, ultra-soft protective cover make them assembly and disassembly convenient and save time, very easy to lock your barbell

WAY TO USE: the barbell clip adopt ergonomic design, Long press the button to expand the diameter, until it reaches the right position of the barbell, then release the button to fix the barbell, save effort, and expand and reduce the diameter through the principle of leverage

PROPER SIZE: the diameter of the 1 inch barbell clip is 25 mm, the total length is about 5.1 inch, small but powerful, you can take them to gym, physical education, also, they are suitable for professional athletes to lift barbell

NOTE: please allow 1-3mm errors to the actual dimension due to manual measurement, but it is tight enough and can prevents plate weights from sliding off the bar, if you have any other problems about the product detail, please contact us

【Safety & Stability】: The barbell barbell clamps contact surface spacer is made of TPR high quality soft rubberized lining material, which has more friction and stronger grip, making the weight plate more solid, not only helps prevent slipping, but also protects the barbell.

【Maximize Sleeve Space】: Weight clips 1-inch width，takes up half the space of a regular barbell collars. Barbells collars provide ample room to load up the bar with more weights. Whether you're using a bulky bumper plate or a small dumbbell handle, our thinner collars allow you to maximize weight capacity and optimize your lifting potential.

【Load-Bearing & Durability】: 2 inch Olympic Barbell Clamps made of high quality nylon material, strong load-bearing capacity, better fall resistance, not easy to break, better protect you and the surrounding safety. Weight collars long-lasting and durable, very suitable for weightlifting, high lift, Olympic weightlifting, bench press and other strength training.

【Easy to Use】: Barbell clips use locking mechanism to keep the collar in place, quick install and release, fully enhance the time efficiency, you can quickly switch the barbell plates during training.

【Focus Training】：Suitable for 2 inch Olympic barbell bar, barbell Collar fits tightly on the barbell, the weight plates will not make annoying rattling noises, avoiding any possible risk of accidents, allowing you to focus more on training.

【Perfect Gym Accessories & Home Gym Accessories】: Giving a gift is giving surprise and safety! Weight clips overall design is small and stylish,after continuous upgrading, the barbell ring provides safety for exercise, but also better storage and carry.Olympic barbell clamps make a thoughtful and practical gift for weightlifters, athletes, and anyone who loves fitness.

COMFORT GRIP HANDLES – Smooth plastic handles make it easy to squeeze the collar and put it in place, even with sweaty hands

SAFER LIFTS – Clips hold weight plates in place to prevent them from sliding off of the barbell during heavy or explosive lifts

SECURE GRIP – Clamps tightly to the barbell and maintains tension so you don’t have to worry about it moving around

FITS STANDARD 2” BAR – Sturdy chrome-plated steel springs are sized to perfectly fit onto typical 2” Olympic barbell sleeves

SIMPLE TO USE – Just squeeze & slip on! These simple, reliable spring clips (sold in pairs) are a classic tool and a must-have for any weight lifter

Fits 1-inch (25mm) smooth dumbbell handle or standard weight barbell (Not for threaded bars), sold in 2 pairs

Premium quality steel construction designed to deliver a tight hold and prevent the weight plates from sliding off

Comfort grip handle makes it easy to squeeze the collar single-handedly, even with sweaty hands

These dumbbell collars are crucial for anyone who uses gym equipment for muscle-building

Backed by a 2 years warranty, don’t hesitate to contact us if you have any issues regarding Lestino Spring Collars

【Package Included】You will receive a total of 4 stainless steel barbell clips, which are double-layer large 5cm/2inch dumbbell bar special circlips, and the quantity is enough to meet your daily use and needs.

【Sturdy Durable】Our barbell clamps are made of carefully crafted stainless steel and rubber, which are easy to hold, sturdy and durable, not easy to damage or break, and can provide tight and strong support.

【Suitable Size】The diameter of the 2-inch Olympic barbell clamps dumbbell clamp is 5CM/1.97in, the total length is about 12CM/4.72inch, and the grip spacing is 8CM/3.15in, the strength training barbell spring clip is just right for your 2-inch Olympic weight barbell and 2-inch dumbbell.

【Easy to Use】The fitness weight bar clamps adopt an ergonomic design, long press the button to expand the diameter until it reaches the correct position of the barbell, and then release the button to fix the barbell, without the risk of loosening or slipping.

【Applicable Occasions】These weightlifting barbell collars are small in size, do not take up much space, are lightweight, and are easy to carry; they are very suitable for home, gym, and outdoor use. The barbell clamp is also very suitable for press, exercise, weightlifting, and other sports.

Quickly change weights: The quick release lever makes it quick and easy to swap out weights

Fits 2-inch weight bars: The clamps have a 2-inch diameter and fit a 2-inch barbell or hex bar

Sold in pairs: Each unit you buy contains a duo of barbell clamps

Color: Black

Patented product: U.S. Patent Number D905805

Secure Fit: These barbell spring clip collars ensure a secure and tight fit on standard 1-inch weight bars.

Versatile Use: Ideal for weightlifting, strength training, and gym workouts, keeping weight plates firmly in place.

Easy Installation: Simply clip the collars onto the bar to lock weights, no tools required.

Durable Construction: Made of sturdy metal for long-lasting performance and resistance to wear and tear.

Compact Size: Lightweight and portable, convenient for carrying to the gym or storing at home.

Compatibility: This Water Bottle replacement lid is only compatible with the 16 oz Stanley beer pint glass tumbler.

Insulation Performance: The silicone plug on the top of the water bottle lid and the flip-top design allow the beer pint tumbler to keep beverages cold or hot for longer, ensuring you can enjoy your drinks at the ideal temperature for an extended period.

BPA-Free Material: The replacement lid for Stanley beer pint is made from BPA-free plastic, ensuring safe drinking. It is also dishwasher safe.

Easy to Use: The lid can be opened and closed by flipping the top cover. The top cover is specially designed for straws, allowing you to drink directly or use a straw. (Remove the silicone plug to use a 9mm straw.)

Thoughtful Design: Featuring multiple sealing lids and gaskets, it is designed for easy portability, so you don't have to worry about spills when carrying it outdoors.

PACKAGE INCLUDE: there are 2 pack 2 inch solid spinlock collars in the package, exactly fit your 2” Olympic weight barbells bar and dumbbell bar of 2 inches, strong and sturdy enough, so you need not worry the barbell comes off, very convenient and be at ease when you lift the barbell

SUPER MATERIAL: each of the 2 circle barbell spring clips is made of high end steel and upscale black plastic, ultra-soft protective cover make them assembly and disassembly convenient and save time, very easy to lock your barbell

WAY TO USE: the barbell clip adopt ergonomic design, long press the button to expand the diameter, until it reaches the right position of the barbell, then release the button to fix the barbell, save effort, and expand and reduce the diameter through the principle of leverage

PROPER SIZE: the diameter of the 2 inch barbell clip dumbbell clamps is 50 mm, the total length is about 5.1 inch, durable but powerful, you can take them to gym, physical education, also, they are suitable for professional athletes to weightlift barbells

UPGRADED: the 1 pair 2 inches barbell dumbbell spring clips are upgraded, 2 circle, more sturdy and stable, it is tight enough and can prevents plate weights from sliding off the bar, if you have any other problems about the product detail, please contact us