Lead2Amazon

Powerful - 2000-lb. rated line pull powered by a 1-horsepower (12-volt) DC motor

Low-amp, permanent magnet motor; Gear Ratio- 153:1

Pull-and-turn freespooling clutch; Gearing- 1-Stage Planetary

Hassle-Free -The roller fairlead creates a safe and smooth pull with the dependable 50-foot galvanized super-duty aircraft cable which is able to withstand abrasive terrain without fraying

Please read the instruction carefully. The winch can cause short circuits if wiring is wrong. If you have any problems, please feel free to consult with us

Value Pack of 2: Enjoy a cost-effective solution with this listing that includes 2 high-quality automotive lift supports, designed for your Liftgate.

Optimal Extended Length: These lift supports boast an extended length from center mount to center mount measuring 20.08 inches, ensuring reliable and efficient support for your vehicle's Liftgate, Tailgate, Trunk or Hatch

Easy-to-Follow Instructions Included: Lift Supports Depot's high-quality lift struts are designed for hassle-free installation in minutes, and often require no special tools. Enjoy a quick and convenient setup process

Premium Quality Lift Struts: Lift Supports Depot provides lift supports that are synonymous with quality. Crafted to meet high standards, these struts offer durability and performance, giving you confidence in your purchase

Compatibility: Trust in the compatibility of these lift supports with a range of OEM numbers, including PM3848L-R, 63269SG032, 17k1001 showa, 63269sg022, 63269SG022, 63269-SG030, 63269-SG031, 63269-SG032, 63269SG030, 63269SG031. If you have any questions, please review the OEM numbers on your original support and reach out to us. We can then confirm whether this lift support is the correct replacement or if another is appropriate

Creates an attractive liner that prevents damage caused by scratches, rust and weather with a durable, protective coating

Truck bed liner in a fast dry, water-based formula forms to the contours of the truck bed and protects with ultimate rust and abrasion resistance

Dries to touch in 1-2 hours and covers up to 40 sq. ft. per quart

Truck bed paint is easy to apply by spray, brush or roller to recoat or restore any metal truck bed

Create a custom truck bed mat on painted or bare metal with a non-skid, textured finish

Save Space & Conveniently Store Your Bike - Free-up your floor space - Keep your garage or indoor space tidy and clutter-free. Our high-quality future proof wall hanging solution to bike storage is great for apartments, homes, garages and sheds. Storage system fits most bike types: road, cyclocross, hybrid and MTB. Can hold bikes up to 22kg / 48.5 lbs weight load. Note: Not suitable for bicycles with wide handlebars (31 inches / 78 cm), long wheelbases or fat bikes.

Safe & Secure – Store your bike in a horizontal position, allowing for convenient storage and removal. Wall mount made from strong steel with scratch-proof coating. Bike arm locking mechanism uses a ‘reliable’ ratchet gear system to securely hold bikes. Wall hanger’s angle (up to 88°) can be adjusted to keep your bike level, catering for different bike frame angles, shapes and sizes.

Simple to Install & Adjust – Detailed installation instructions and mounting screws included. Adjustable cradle arms ensure that all size and shape bicycle frames can be accommodated, with push button lock system to secure your ride. Hanger beam can be adjusted to fit all environments and widths of bicycles, extendable from 8.7 inches up to 12.6 inches – secured using secure push button mechanism.

Scuff-Free Storage – Arm ‘cradles’ made from super-soft TPR rubber material that will not scratch your bike, whether aluminium, titanium, carbon or steel. Cradles protect frame finish and holds complex tube shapes with no concern for marking or movement. Supplied with ultra-strong elasticity rope to loop around front wheel and bike frame, to prevent front wheel knocking against your wall.

Pro Quality – We’re so confident about our top-quality racks that if you have any product issues, we’re very happy to either provide a Refund or a Replacement on your purchase! We’re also here to support you if you have any questions or queries, please get in touch and we’ll gladly help. Important: Only install bike wall hanger on a solid stud, beam, masonry or concrete wall. DO NOT install on ‘unsupported’ wall surfaces e.g. plasterboard wall unless there is a strong wooden stud behind it.

Top tube adapter adds a top tube for carrying step-through, suspension, and other non-conventional bike frames

Designed for use with hitch and trunk mounted bicycle carries

For bicycles with a measurement of 18"-28" Steam-to-seat post

Easy installation - No assembly or tools required

Maximum bicycles weight 45lbs. Not recommended for use with e-bikes

★Stable Support: Lids soft open gently, angle up to 100 degrees. NOT SOFT CLOSE

★Force:100N/22lbs(Per Strut), Length (From hole center to the other): 9-11/16 '', travel: 3-14/25 '', distance between ball mounts compressed; 6-1/8''

★Available working temperature :-11℃~50℃/12℉-122℉, Up to 50,000 times of factory inspections

★Manufacturer-Direct Sales: High quality, Reasonable price

★Please check all information before you buy. If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours

4 Flat to 7 Blade Adapter:Voltage range: 6-24 Volts, Converts 4 way flat vehicle end to 7 way blade trailer end; Connects tail reverse turn signals, No splicing of wires needed.

Standard shape, size and capability:Our plugs and sockets are available in all standard connector formats and are designed to give you a reliable connection every time you plug your trailer into your vehicle.

Main Features:Our connectors are made with quality to be long-lasting and many have bonded wires to keep the connection protected and orderly. Dust caps to keep them well protected from dust, rain and road grime, giving you a solid connection for many miles to come.

Easy to Install:According to installation, different color wire lines compatible different function, you can quickly install it. Package come with mounting bracket helps to fix.

Quality： This product is made from ABS plastic, being long lasting and resistant to both oxidation and high temperatures.

Advantageous Trailer Wiring: The PEAKTOW Electrical Wire Connector Junction Box 1-Pack provides safe and secure trailer wiring install with markings to easily identify the correct connections

Durable Construction: Commercial grade rugged flameproof ABS junction box with cover that seats over the base with fastening screws, perfect for RVs, trailers, campers, caravans, food vans and other towed vehicles. Non-corrosive rust free material can stand up against the elements!

Perfect Sealing Performance: 4 open and 4 close rubber fitted grommets for option based on your wiring requirements, making the whole junction box weatherproof, dustproof and corrosion resistant

Package includes: One junction box with seven wire studs, four open and four close rubber grommets, two screws.

Two years limited quality warranty. PeakTow is a Canadian owned and operated company. If you have any questions, comments, or issues, please contact us through Amazon message. Our Canada-based customer service representatives are always happy to assist, and we stand behind our products with a CONFIDENT 100% MONEY-BACK HAPPINESS GUARANTEE!

Enhanced Visibility and Safety: For your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety

Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare

Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse

Considerate Design for You:

Universal for any 12V vehicles more than 80” wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV Motorhome etc. Package Include: 1x trailer light bar, 1x hardware pack.

Material: metal+plastic

Overall size: approx 5.9"x2.9"x2.8"

Black powder coating resists corrosion

Fits for 2015- 2020 Ford F150 F250 F350 Models

Easy to install,just slide the clip into the tie down brackets and then lock it with key