Fully Isolated - All inputs and outputs are isolated from the motion control core, and pulse isolation is isolated using high speed 10M optocouplers. Support single and double pulse mode.
Dual-core ultra-high-speed CPU (single core with a maximum frequency of 204MHz), the processing power is extremely redundant. And to ensure the 3K axle linkage 1000KHz pulse output frequency, 4 axle linkage 750KHz pulse output frequency, 6-axle linkage p
With 16 Isolated Input Port - The input interface is simpler, the port are wet and dry contacts, and the wiring is simpler. The dry contact method only needs to connect a physical switch to the ground line externally. All 16 input port have signal indication. When the indicator is low, the indicator is on and the debugging is simple and clear.
Easy To Upgrade - this product upgrade hardware layer firmware is only connected to the brush through USB, fast, not afraid of brushing, firmware is open, you can try for 1 hour, more than 1 hour will stop.
24 Output Port & 32 Input Port - Has a maximum of 24 output port (8 channels, RS485 can be expanded), 32 input port(with 16 input, RS485 can expand 16).