Lead2Amazon

Mr.Grippy is compact, portable and optimized to maximize friction during ski preparation. You can sharpen steel edges, rinse, wax and adjust bindings.

Designed so that you can work on two cross-country skis at the same time. It works perfectly with both adult and kids skis

Innovative and unique design that makes ski waxing and tuning effortless. Mr.Grippy can be placed on any surface to create a stable workbench to conveniently work on your skis.

Sharpen steel edges, wax and adjust bindings. Holds ski in two positions, flat for waxing and upright for tuning & sharpening edges.

Simple and easy to prep your alpine skis and cross-country skis. Mr.Grippy works with any type, width or length of ski.

CONTROL SPEED: Adult can ease back on the shock absorbing leashes to slow the beginner skier/rider. Ski instructor approved. Great for skiing or snowboarding!

EASY SKI LIFT ACCESS: Straps tuck into the attached pouch. Once off the lift, you can quickly pull them out of the pouch and take your next run!

ELASTICIZED LEASHES: The leashes are attached with a bungee rope, allowing for a smooth ride down the mountain for both the beginner skier/rider and the adult! And weighing in at about 1 lb, our harness is extremely LIGHTWEIGHT and COMFORTABLE.

EASY LIFT HANDLE: Help the beginner skier/rider up on the lift or after a fall on the slopes.

REMOVABLE 7’ LEASHES: For when they want to try a section of the mountain untethered, you can remove the leashes, but leave the harness on in case you need to use the EASY LIFT HANDLE.

MDXONE was designed with quality, comfort, and safety in mind.

User friendly: One 9' static rope with 12-inch bungees cord attachments allow your child to have the flexibility they need to learn and the shock absorption that you need to teach.

The bungees also eliminate the need of two ropes. Pull right or left to have the child initiate turns.

Designed with two different settings to help beginning skiers progress to the next level in their on-slope education. Y-GO mode while going downhill and Y-TOW mode on the flat to pull your child around

With safety first in mind, MDXONE has tested this snowboard & ski harness trainer in an accredited lab, earning them a CPSIA & certification so that you can feel safe with your little one on the slopes.

MDXONE is also supported by CASI (Canadian association of snowboard instructors) and Canada Snowboard.

Fits most kids age 2-6 years old, boys & girls

Ski Snowboard Waxing Iron 120V/800W ideal for Alpine, Nordic and snowboard, Premium Ski and Snowboard Wax Iron Tune Up Waxing Iron 120V 800W with America Plug.

Precise, consistent temperature control.Thick base plate holds heat well and is accurately adjustable to melt all temperature ranges of wax.adjustment temperature working range from 100 - 180 degress C for different types of waxes (eg:cold,warm, universal etc) melt at different temperature required.

Sleplate Size:6.3*3.54*0.59inch(16*9*1.5cm). Dimpled base allows the iron to move easily over your base (think golf ball). Thick cast aluminum base retainsheat,minimizing temperature fluctuation.Strong ergonomic body feels great and is very durable.

Strong and durable ergonomic body feels great with 94.4in(2.4 Meter) Power Cord.

ETL Certification,and instructions to make wax work safer and more easily.please don't used Infrared thermometer testing the soleplate temperature,becase of the soleplate polishing like a mirror,there is can reflect infrared ray ,so that the Infrared thermometer read the temperature is inaccurate.so why just 55C~60C degree read by Infrared thermometer.This has been a problem several times,and got some bad review.

[Cleaning Kit] We have a complete waxing kit, including cleaning tools, which contain sand paper (for polishing the edge), fibertex pad, metal scraper, wax scraper (230mm/9.06inch length), Nylon/Brass/Horsehair Brush and wax apron at work

[Iron] Snowboard waxing kit-Iron 110V/800W temperature adjustable, with thick soleplate, stable temperature. The adjustable temperature range is 100℃/ 212 ℉-170℃/338℉.

[100g Wax] Snowboard wax work in the environment of -5°-15°, it is simple and efficient to use, it can be used about 12 times.

[Edge Trimming and Frosting Combination] 4 PTEX (2 black and 2 clear), which can be used to repair the bottom plate; 7/20cm (2.76/7.87inch) files, used to sharpen the edge, and Edge Tuner (86°/87°/88°/89°)for side edge, which can be accurate to 1° (86 /87/88/89 °).

[Storage Bag and Accessories] Snowboard and ski tuning kit--we are equipped with a waxing kit bag, which can put all tools, in addition, there are 2 ski brake retainers and snowboard binding screw set - 8pcs.

Initial polishing brush

Remove excess wax

Ergonomic wooden grip

Package Dimensions: 4.5" L x 7.25" W x 1.25" H

Nylon Bristles: Generate heat and seal the ski base

Design allows driver to flip to 90° or 180° for either torque or speed

Pocket-friendly for easy carrying

Features #2 and #3 Phillips heads, a built-in bottle opener, and a keychain loop

Works with all bindings

Can be operated with gloves on; 1-year warranty

Demon United Alpine Ski Roto Brush Kit- Roto Brush Handle Axle- Includes 3 Brushes: Nylon, Brass, Horsehair and 133 Gram Wax

100mm -Green Nylon 9mm Brush. Demon United's rotobrush control handle includes a high quality shield, large rubber grip handle and smooth bearings. Compatible with all 100 mm roto brushes from any brand. Use the nylon brush for polishing overlays and softer waxes. IMPORTANT* Keep drill speed under 800 rpm when using this brush and wear protective glasses.

100mm -Brown Horsehair 6mm Brush. Demon United's rotobrush control handle includes a high quality shield, large rubber grip handle and smooth bearings. Compatible with all 100 mm roto brushes from any brand. Horsehair is best used for the medium and hard waxes. IMPORTANT* Keep drill speed under 800 rpm when using this brush and wear protective glasses.

100mm -Brass 100mm Brush. Demon United's rotobrush control handle includes a high quality shield, large rubber grip handle and smooth bearings. Compatible with all 100 mm roto brushes from any brand. Brass is best for the optimal base cleaning prior to waxing. IMPORTANT* Keep drill speed under 800 rpm when using this brush and wear protective glasses.

Wax Spec- 133 g bar of our High quality White Lightning Universal blend. Our waxes are blended, scented and made with our proprietary blends in Southern California. Bag Spec: Internal strap to secure wax iron, internal open-access tool pockets. Heavy duty carry strap and easy wipe off material make it easy to keep your kit clean!

3.5" x 1.5" working area on brush

4" x 2" cork

Multi-use nylon tuning brush with cork

Use brush to expose base structure after waxing

Cork after using rub on wax, or in extreme cold snow

Quickly sharpens side edge of skis and snowboards

Fits in pocket

88 degree or 90 degree bevel

3.75 inches x 2.25 inches