Lead2Amazon

Standard Blade Fuse: 0. 75 x0. 74 x0. 3 Inch. Fuse Type: Blade. Material: Zn alloy/Plastic. Protect your car and your electrical device from short circuit, overload etc.Material:plastic

10 Pack In-Line Fuse Holder: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit.

Safety Protection: Unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is an inline fuse holder extremely safe and reliable. Easy to use: Turn one fuse slot into two while providing protection for both circuits

Suitable Fuses: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm

Package Include: 10 x 14AWG ATC/ATO Inline Fuse Holder and 120 pcs standard blade fuse Puller

Enhanced Visibility and Safety: For your trailer 80” or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety

Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare

Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse

Considerate Design for You:

Universal for any 12V vehicles more than 80” wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV Motorhome etc. Package Include: 1x trailer light bar, 1x hardware pack.

Durable to help transfer high voltage pulses without damage

Designed, engineered, tested, and warranted for GM vehicles

Precise fit for ease of installation

For proper installation, locate your nearest GM dealer, independent service center, or body shop

Thumb button control for precise pouring

7/8-inch funnel spout fills even the smallest equipment

Attached dust cover keeps your spout clean

Integrated 20 mesh stainless steel screen

Bosch HEPA Premium Cabin Air Filters are designed and tested to meet High Efficiency Particulate Air (HEPA) standards based on ISO 29463-3:2011 and provide filtration efficiency of 99.97% at 0.3 microns

This efficiency provides ultimate protection in trapping particulates that can enter your vehicle and provides the cleanest air possible for you and your family

Melt-blown electrostatic layer and very dense media provide greater trapping capabilities; Additional static cotton layer added to the HEPA media provides higher capacity

Structural ribs incorporated into design ensure filter integrity, increasing the stability of the filter for optimum performance over its lifetime

Bosch HEPA Cabin Air Filters provide true clean air for enhanced respiratory health without an added chemical odor neutralizer; Cabin air filters should be replaced at least once every 12 months (or every 12K miles)

Compatible with select vehicles (Note: vehicle trim level may affect fitment - verify specific vehicle fitment details with fit checker above): MAZDA: 2014-18 3, 2014-18 3 Sport, 2014-20 6, 2013-20 CX-5

Exclusive FILTECH media technology screens out and holds on to up to 14 grams of dirt and particles, preventing it from circulating throughout your engine and causing damaging wear that can lead to engine failure

OE fit ensured through strong steel base plates and housings that prevent warpage, leaks and poor fit

Silicone anti-drain back valve ensures engine receives a supply of clean oil when the vehicle is started

High lubricity gasket design provides a tight, leak proof seal, yet allows for easy removal when it's time for an oil change; Metal spiral-wound center tube reinforces internal strength for durability

Compatible with select vehicles including, but not limited to, the following (Note: vehicle trim level/engine may affect fitment - verify specific vehicle fitment details with fit checker above): CHEVROLET: 15-18 City Express; HONDA: 00-06 Insight

Compatible with (cont.): INFINITI: 08-12 EX35, 2013 EX37, 03-12 FX35, 2013 FX37, 99-02 G20, 11-12 G25, 03-08 G35, 02-04 I35, 08-13 G37, 2013 JX35, 06-10 M35, 12-13 M35h, 11-13 M37, 2015 Q40, 14-23 Q50, 14-15,17-22 Q60, 14-19 Q70, 15-20 Q70L

Compatible with (cont.): INFINITI: 02-03 QX4, 14-17,20-23 QX50, 2022-23 QX55, 14-23 QX60, 14-17 QX70; KIA: 01-05 Rio, 94-01 Sephia, 00-04 Spectra; MAZDA: 11-14 2, 12-23 3, 14-21 6, 86-95 323, 95-02 626, 16-23 CX-3, 13-23 CX-5, 16-21 CX-9, 20-23 CX-30

Compatible with (cont.): MAZDA: 90-05,16-23 Miata, 92-96 MX-3, 95-97 MX-6, 90-03 Protégé, 02-03 Protégé5, 84-95 RX-7, 04-08 RX-8; MERCURY: 91-94 Capri, 88-96 Tracer; MG: 71-73 Midget; NISSAN: 95-98 200SX, 03-09 350Z, 09-20 370Z, 02-22 Altima, 09-14 Cube

Compatible with (cont.): NISSAN: 05-20 Frontier, 11-17 Juke, 18-21 Kicks, 01-21 Maxima, 03-20 Murano, 13-20 NV200, 01-04,13-20 Pathfinder, 04-09,11-17 Quest, 08-21 Rogue, 14-15 Rogue Select, 17-21 Rogue Sport, 98-21 Sentra, 07-20 Versa, 14-20 Versa Note

Compatible with (cont.): OPEL: 73 2000, 73-75 Manta, 69-73 Opel; SAAB: 05-06 9-2X, SCION: 2016 iA; SMART: 08-15 Fortwo; SUBARU: 87-95 Justy; SUZUKI: 09-12 Equator; TOYOTA: 16-17,19-20 Yaris, 17-18 Yaris iA

All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles

Thoroughly tested for reliable, leak-free performance

Coated seals support seal longevity and durability

Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies

DESIGNED SPECIFICALLY FOR K&N AIR FILTERS

FORMULATED TO IMPROVE AIR FILTER PERFORMANCE

QUICKLY PENETRATES AND SATURATES FILTER PLEATS: K&N Air Filter Oil traps contaminants that reduce air flow efficiency and disrupt engine performance

CLEANS ALL OILED K&N AIR FILTERS

FILTER OIL: K&N red filter oil remains suspended in the pleats of the cotton filter material of High-Flow Air Filters, allowing for exceptional contaminant capture

RENEWED EFFICIENCY: Restores air flow efficiency so your K&N air filter performs like new

Patented design - features high-pressure, die-cast aluminum housing construction to more reliably replace the failure-prone plastic housing on specific 2011 and later Chrysler, Dodge, Jeep and Ram vehicles with Pentastar engines

Smarter solution - includes required gaskets, oil cooler, oil filter element and cap, bringing early fitments to latest generation filter specification; see included instructions on filter cap

Trustworthy quality - engineered in the United States and made with durable materials to precise specifications, including premium seals to further help resist future leaks

Repair it once - don't replace a cracked oil filter adapter with one that can fail the same way again; fix it the right way with this improved design

Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool

This is the only listing on Amazon for authentic Dorman oil filter housing 926-959