Lead2Amazon

High Quality: This Oil Cooler will protects the engine, prevents oil leakage, prevents corrosion, longer service life. Oil Filter Housing is made of Aluminum, it avoids the defects of fracture and oil leakage caused by the use of plastic casings in the other products, will minus your frequent replacements

Compatibly: Dodge 2011-2014 Avenger | 2011-2015 Durango | 2011-2016 Challenger Charger Grand Caravan Journey Engine Oil Cooler Filter Housing , Jeep 2014-2016 Cherokee | 2011-2015 Grand Cherokee | 2012-2016 Wrangler Oil Cooler with Oil Filter Housing Adapter , Chrysler 2011-2016 200 300 Town & Country Oil Cooler , Ram 2013-2016 1500 | 2014-2015 C/V | 2014-2016 ProMaster 1500 2500 3500 Engine Oil Cooler Filter Housing Adapter Assembly 3.6L V6 Engine

Durable: The old plastic housing can't handle the heat and will warp over time causing leaks which will give you trouble. This Engine Oil Filter Housing Kit is expertly designed and constructed of reinforced solid aluminum to ensure excellent corrosion resistance and excellent heat resistance for a long practical life. As an upgrade to the plastic version, this will minus your frequent leaks and tedious replacements, designed to give you long-term stability and excellent performance

Package Included: 1 x Aluminum Oil Cooler , 1 x Oil Filter Housing , 1 x Oil Filter, 1 x Pressure Sensor, 1 x Temperature Sensor, 5 x O-rings and Seals, 11 x Engine Mounting Bolts, 12 x Gaskets. All required parts are already pre-installed. Replace OE#: 926-876, 5184294AE, 68105583AF, 926876, 5184294AC, 5184294AD, 5184304AD, 5184304AE, 5184304AF, 68105583AA, 68105583AB, 68105583AC, 68105583AD, 68105583AE Engine Oil Cooler Oil Filter Housing

Noted: When the engine rotates at a high speed under a high load, the heat generated by friction can cause the oil to overheat. If the Engine Oil Cooler fails to cool down at this time, the decomposition of the oil will not be well lubricated and will slowly cause damage to the engine. It is recommended that you replace it in time. Our Product is brand new, ready to install out of the box. Please confirm the OE of your model and parts before buying, so as not to buy wrong

Special Stepped Design

3/8" and 1/2"

Used to cover the factory oil cooler ports on vehicles not equipped with an oil cooler.

Large ported internal cavity for better flow than the OE diecast bypass cover.

Fits most GM Gen III and IV LS-series small block oil pans with oil cooler ports located above the oil filter.

Includes aluminum bonded high-temp FKM rubber gasket for a leak-free seal and class 10.9 mounting screws.

Engineered for use on a variety of engine components - effective on: oil pan, ladder frame, front and rear covers, t-joints, manifold corners, intake, manifold end seals, and cam covers

Designed for quick and easy application, assembly may be filled with oil or coolant immediately after applying sealant and torqueing the bolts

High viscosity product that cures when exposed to air

This oil cooler cover plate is used to bypass the oil cooler feed port to the oil cooler return port in your oil pan above the oil filter, commonly used for oil cooler plumbing in factory applications

1/2" thick heavy duty aluminum allows more oil to flow through the engine internally

Manufactured from lightweight 6061-T6 aluminum; Anodized finish for strength, durability and anti-corrosion

Compatible with all LS oil pans, except GTO front-sump oil pans due to the architecture of the internal oil routing in the pan, and dry-sump oil pans (LS7, LS9, etc), and LS4 oil pans

Package includes plate, reusable O-ring, and mounting bolts

【Compatible With】2014-2020 GMC Sierra, Yukon; 2016-2018 Cadillac CT6, 2015 Escalade; 2014-2019 Chevrolet Silverado, 2015-2020 Chevrolet Suburban, Tahoe. Replace Part Number: 86774933, 85585333.

【Function】Bypass valve regulates coolant flow within the engine and cooling system based on temperature, thereby optimizing engine performance and preventing overcooling and overheating.

【Improved Engine Efficiency】By helping the engine reach its optimal temperature more quickly, facilitates quicker warm-up during cold starts and prevents overcooling during extreme conditions, protecting transmission components from potential damage.

【Good Quality】Bypass thermal valve made of high-quality aluminum has corrosion resistance, wear resistance, and good electric heating performance, keeping the product used for a long time.

【Efficiency】The trans cooler thermal valve is a vital addition to the transmission cooling system, offering enhanced reliability, and improved efficiency, reducing the risk of premature wear and failure.

Material:Aluminum

Year:2014 2015 2016 2017 2018 2019 2020

Model:CT6 Escalade Silverado Suburban Tahoe Sierra Yukon

Fitment Type:Direct Replacement

Funtion:Perfact fit.Keep the temperature of the transmission cooling system within an appropriate range for better operation

Service:We provide warranty period to ensure you are not burdened.If any issue, rest assured that we are here to assist you promptly and without hesitation

Made from heat and chemical-resistant materials

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

This oil feed plate is used to seal off the pressurized oil port in your oil pan above the oil filter, commonly used for oil cooler plumbing in factory applications, while also offering a 1/8" NPT port to access the oil circuit of your engine

Can be used for turbocharger or supercharger oil feed, or for oil pressure/temp gauges

Compatible with all LS oil pans, except GTO front-sump oil pans due to the architecture of the internal oil routing in the pan, and dry-sump oil pans (LS7, LS9, etc), and LS4 oil pans

Manufactured from lightweight 6061-T6 aluminum; Anodized finish for strength, durability and anti-corrosion

Package includes plate, reusable O-ring, and mounting bolts

Product Benefit: LS billet oil port plate offers a high-quality solution for blocking off the oil pan during LS engine installations, preventing leaks and ensuring efficient oil flow.

Durable and Lightweight: Crafted from high-quality aluminum alloy 6061, this LS Billet Oil Port Plate offers excellent durability and longevity while weighing significantly less than traditional plates.

Product Benefit: The LS is a direct fit for LS engine models, providing a seamless installation process without the need for modifications or additional components.

Product advantages: LS billet oil port plate is manufactured by CNC precision engineering to ensure safe and reliable sealing, prevent oil leakage and ensure the best performance of the engine. The surface is anodized, durable, strong, rust-proof, not easy to damage.

Product Benefit: Upgrade your LS engine with the LS , providing improved oil flow regulation and enhancing the overall efficiency of your engine, resulting in better performance and longevity.