Lead2Amazon

SIM Card adapter value pack! Total of (9) adapters and (3) SIM Extractors

3X Micro to Regular

3X Nano to Regular

3X Nano to Micro

3X SIM Extractor Tool

[High Performance] - The M.2 adapter is based on 10Gbps USB 3.1/3.2 Gen 2 bridge chip (RTL9210B). Store and backup data at a high speed. Compatible with USB3 0/2.0.

[Only Suitbale for PCIe NVMe M.2 SSD] ANYOYO M.2 to USB enclosure only for NVMe M-Key M.2 SSD (PCIe-based) , applicable to sizes 2230 / 2242 / 2260 / 2280 SSDs, PCIe NVMe case does not support M.2 SATA based SSDs, M.2 PCIe AHCI SSDs, and any SSD from Mac.

[Tool Free] - This M.2 to USB adapter is screw-free, tool-free, no cable needed. A small silicone plug can easily fix and won’t damage PCBA. Free thermal pad for rapid cooling.

[Hot-Swappable] - This NVME adapter is plug and play, no drivers needed. Simple but powerful! Use the Thermal pads and aluminum alloy heatsinks included in the package to help the SSD better transfer heat.

[Please Note] - Please Check to Make Sure Your Drive is M.2 NVMe/SATA SSD. Any B+M Key SSD-based SATA transfer protocol or non-M.2 form factor SSDs CAN NOT BE RECOGNIZED.

Kingston SD Adapter.

micro SD to a Full Sized SD Adapter.

Adapter Only. Memory Card Sold Separately.

converts micro SD Cards (Not Included) to a Full Sized SD Size.

Color: Black

Details: You are buying Double Micro SD card Adapter, which will allow you to convert your iPod Video (5th/5.5th Gen) and iPod Classic (6th/6.5th/7th Gen) from using a hard drive to using Double Micro SD card Adapter

This product works in: All 5th/5.5th Generation iPods (iPod Video 5th/5.5th Support capacity of 16GB - 1TB ) , All 6th/6.5th/7th Generation iPods (iPod Classic 6th 1.12/6.5th 2.01 Support capacity of 16GB - 128GB, 7th 2.04/2.05 Support capacity of 16GB - 1TB). Please check the models shown in the picture

Notice: If only one Micro SD card will be used, be sure to insert it into slot 1, otherwise it will not be recognized

Product advantages: 1.Thin profile – thinner than the original HDD, 2.Zif Connector – Gold plated and perfectly matches the Apple HDD Ribbon, 3.Yamaichi micro sd Connectors – High quality Japanese made micro sd Connector, 4.micro sd U1 & U2Card Compatible, 5.With much lower power consumption than the original Hard drive, longer run times and quicker user interface.

Warranty: We provide 2 year warranty, if the product is damaged, replace it with a new one directly. (Cables are not covered under warranty). If you have any questions, please feel free to contact us

Compatible with MacBook Air A1465, A1466 (2013-2017), MacBook Pro Retina A1502, A1398 (2013-2016), Mac Pro ME253 MD878, iMAC A1419 2013-2017, iMAC A1418 (EMC:2638/EMC:3069).

The adapter card only works with 2280 M-key of M.2 PCIe x4 AHCI Protocol SSD, NOT fit M.2 PCIe x4 NVMe solid state drives. (NOT fit for Samsung 970 Evo Plus,PM981,950 Pro)

Plug and play, NO driver and No additional power required. (Attention: Turn OFF the power and Remove the battery before installation.)

Support NVMe SSD such as Samsung: 960 Evo, 960 Pro, 970 Evo, 970 Pro, Adata: SX6000, SX7000, SX8200, SX8200 Pro etc, Kingston: A1000, A2000, KC1000, Corsair: MP500, MP510, Intel: 600P, 660P, 760P.

ONLY Supports for 2280 Type M-Key NVME M.2 SSD. (NOT support PCI-e M.2 B-key or B+M-key socket)

Note: SD card cannot plug in fully : MacBook Retina 15": 2013 or later ==>will be out of 3-5mm ; MacBook Retina 13": Mid 2012, 2013, 2014 ==>will be out of 3-5mm

Work for Extra Storage ( Please make sure your macbook with SD card slot first) : MacBook Pro 13": Mid 2009, 2010, 2011, 2012, 2013, 2014

MacBook Pro 15": Mid 2009, 2010, 2011, 2012, 2013, 2014 ; MacBook Pro 17": Mid 2012, 2013, 2014

MacBook Air 13": Late 2010, 2011, 2012, 2013, 2014 ; MacBook Retina 15": Mid 2012

Package includes 1 piece white adapter , memory card not included . 20mm approximately Micro SD TF to SD Card Kit Mini Adaptor supports Micro SD / Micro SDHC / Micro SDXC

PCIe NVMe Adapter Supports 2280/2260/2242/2230 M.2 NVMe SSD. (NOT compatible with SATA M.2 SSD)

PCIe M.2 Adapter Support PCIe X4 / X8 / X16 slot. NOTE: It will not fit the PCIe X1 slot.

NVMe PCIe Adapter Supports any OS like Windows/Mac/Linux/Fedora/SUSE/Ubuntu/Red Hat(no driver required)

M.2 PCIe Adapter Supports PCIe 1.0/2.0/3.0/4.0/5.0 motherboard, PCIe X4 Lanes full speed.

M.2 Expansion Card with Aluminum Heat Sink and RGB flowing color lights, RGB color lights can be manually turned off.

M.2 to PCIe Adapter alternates colored lights in standby and flashes fluidly when reading or writing data.

Read and write speeds are related to the version of PCIe, such as PCIe 2.0/3.0/4.0/5.0, and also to the version configurations supported by PCIe for the three key modules (SSD/PC motherboard/CPU), and the maximum read and write speed is limited by the low hardware configuration.

Usually older computer motherboards do not support booting from PCIE, and booting a system from M.2 requires a newer and more modern chipset to do so.

M.2 Adapter Package Including : ❶ M.2 PCIe X16 Adapter x1 ❷ SSD Spare bolt x1（Pre-installed on PCB） ❸ Screw Driver x1 ❹ Heat conducting silica gel pad x2 （thick + thin） ❺ Aluminum heat sink x1 ❻ Spring-loaded nails for mounting heat sinks x2 ❼ Plastic bolts for mounting heat sinks x2

Computer peripheral equipment manufacturers use CF-IDE cards in conjunction with CF cards to test motherboards, sound cards, graphics cards and other products. In these occasions, the power supply needs to be turned on/off frequently. Traditional mechanical hard drives are easily damaged. CF is a kind of electronic hard disk, which is completely different from mechanical hard disk in principle, and it is not easy to be damaged in these occasions

Portable instruments that use embedded X86 or RISC cores usually have IDE interfaces. If the CF card cannot be directly connected to these instruments, you can use this adapter to complete the transfer

Personal computers (PCs): These computers are usually x86 kernels, which are the main platforms used by the card. Some digital cameras have a CF card interface. You can access your picture data on a desktop computer through this card

Industrial PCs use this card and CF card together to store embedded operating systems such as embedded LINUX or WIN CE

Support CF-I and CF-II two types of cards: also support IBM micro hard disk with CF-II interface. 5.0V or 3.3V power supply: select the appropriate power supply voltage according to your CF card

High-Quality Plastic Material: This masd-1 camera t f to x d insert adapter is crafted from durable plastic, ensuring long-lasting use and reliability

Efficient Conversion: The t f to x d card adapter seamlessly converts micro s d and micro sdhc cards to x d format, making it versatile for various devices

Compatible with Olympus: This adapter is designed to work with olympus x d picture cards, providing a perfect fit for your camera needs

Portable and Convenient: Measuring just 0.98*0.98*0.19 inches and weighing 1.57 grams, this compact adapter is easy to carry and prevents damage to your camera and card

Note on Usage: The t f to x d adapter cannot be read directly by a reader; use the camera's data usb cable or remove the t f card and use a micro s d adapter for reading

Includes Memory Stick Pro Duo Adapter For Universal Compatibility With M2 Slots And Memory Stick Pro Duo Slots

Dual Voltage Operation; 1.8V For New Sony Ericsson Mobile Phones, 3.3V For Memory Stick Pro Duo Compatible Devices

Controlled Ejection Design Allows For Easier Removal

Sony Magicgate Encryption Technology Support

Compatibility With All M2 Slotted Mobile Phones As Well As All Memory Stick Pro Duo Slotted Device