Lead2Amazon

PCMCIA Compact Flash Adapter * 2 Pack

There are two PCMCIA Adapters in the package

Use any Type I CompactFlash card

Convert 50 - pin CompactFlash Card into 68-pin PCMCIA interface

Easy to install and use and Rugged and durable

PCMCIA Adapters+CompactFlash memory card, which can be used in car equipment!

Simply insert the card into the adapter and it becomes a "plug and play" memory card, compatible with any device with a PC Card slot

[Efficient] - This M.2 USB adapter can used as a portable flash drive or external hard drive for cloning or retrieving data, not cable needed

[High Performance] - The M.2 drive adapter comes with a 5Gbps USB3.0 1153E chip, can retrieve and backup data in high-speed

[Applicable SSD Hard Drive] - Input Interface: ONLY support for SATA Based B Key and B+M Key SSD, DO NOT support any PCIe NVMe based SSD. Output Interface: support for USB 3.0 and downward compatible with USB 2.0

[Support System] - The M.2 SSD SATA adapter compatible with Window 2000/ 2003/ XP/ Vista /7 /8, Linux OS, Chrome OS and Mac OS. Supports for 2230 / 2242 / 2260 / 2280 SATA port NGFF SSD

[Hot Swap] - The USB to 2280 M.2 SSD drive adapter without enclosure cover, can help fast heat dissipation. Plug and play, can realize full potential of high performance

PCIe NVMe Adapter Supports 2280/2260/2242/2230 M.2 NVMe SSD. (NOT compatible with SATA M.2 SSD)

PCIe M.2 Adapter Support PCIe X4 / X8 / X16 slot. NOTE: It will not fit the PCIe X1 slot.

NVMe PCIe Adapter Supports any OS like Windows/Mac/Linux/Fedora/SUSE/Ubuntu/Red Hat(no driver required)

M.2 PCIe Adapter Supports PCIe 1.0/2.0/3.0/4.0/5.0 motherboard, PCIe X4 Lanes full speed.

M.2 Expansion Card with Aluminum Heat Sink and RGB flowing color lights, RGB color lights can be manually turned off.

M.2 to PCIe Adapter alternates colored lights in standby and flashes fluidly when reading or writing data.

Read and write speeds are related to the version of PCIe, such as PCIe 2.0/3.0/4.0/5.0, and also to the version configurations supported by PCIe for the three key modules (SSD/PC motherboard/CPU), and the maximum read and write speed is limited by the low hardware configuration.

Usually older computer motherboards do not support booting from PCIE, and booting a system from M.2 requires a newer and more modern chipset to do so.

M.2 Adapter Package Including : ❶ M.2 PCIe X16 Adapter x1 ❷ SSD Spare bolt x1（Pre-installed on PCB） ❸ Screw Driver x1 ❹ Heat conducting silica gel pad x2 （thick + thin） ❺ Aluminum heat sink x1 ❻ Spring-loaded nails for mounting heat sinks x2 ❼ Plastic bolts for mounting heat sinks x2

【PCIE M.2 Conversion Adapter Card】 PCI Express card with NVMe and SATA M.2 SSD slots. 2230/2242/2260/2280/22110 M.2 PCIE (NVMe/NGFF) B-Key/M-Key/B&M key SSDs are supported. PCI-e protocol SSDs with NVME specifications must support read in WIN10. Motherboard BIOS support for PCI-e boot is required to boot as a system disk.

【Support List】 Support: PCIe 4X / 8X / 16X and B-Key/M-Key/B&M key M.2 NVMe and SATA. Note: PCI-E 1x and PCI slots are not supported.

【High-speed Transmission】 Using NVMe protocol and PCI-E channel, the maximum reading speed reaches 32Gbp/s (theoretical speed). This greatly reduces the transfer time of large files. *Note: Actual transmission speed depends on device interface and working environment.

【Safe and Stable】 Solid capacitor for voltage regulation can avoid SSD damage current wave to spring up. Operates stably under high and low temperatures to protect the hard disk. Thick gold-plated gold finger is durable; compatible with Windows 7/10/11; no driver required for win8 and above; driver required for win7 and lower SSDs.

【Effective Heat Dissipation】 Double-sided copper strips and porous heat dissipation design lower the temperature generated by the SSD during operation. This will stabilize SSD performance and extend the usage life of the hard disk.

✔ FLEXIBLE: The memory stick adapter has two slots. You can insert one or two Micro SD/ SDHC cards to adjust the capacity according to your personal needs.( Micro SD, Micro SDHC, Micro SD+Micro SD, Micro SDHC+Micro SDHC, Micro SD+Micro SDHC)

✔ HIGH CAPACITY: The capacity of memory stick pro duo adapter can be up to 64GB. This adapter compatible with most Sony memory stick supports ⚠ 256M-32G for every single card and the card capacity can be the same or different

✔ UPGRADED VERSION: Dual Slot Micro SD to MS Pro Duo Adapter

✔ RELIABLE: A high-quality card transporter will determine the output speed of the adapter based on the speed of the inserted memory card. Please format your card in your device for first time use

✔ PERFECT COMPATIBILITY: The adapters as accessories are effectively compatible with PSP and most Sony products

NOTICE: You must use the card slots in sequence, format slot 1 first, then format slot 2, otherwise the slot 2 couldn’t work normally

Note: SD card cannot plug in fully : MacBook Retina 15": 2013 or later ==>will be out of 3-5mm ; MacBook Retina 13": Mid 2012, 2013, 2014 ==>will be out of 3-5mm

Work for Extra Storage ( Please make sure your macbook with SD card slot first) : MacBook Pro 13": Mid 2009, 2010, 2011, 2012, 2013, 2014

MacBook Pro 15": Mid 2009, 2010, 2011, 2012, 2013, 2014 ; MacBook Pro 17": Mid 2012, 2013, 2014

MacBook Air 13": Late 2010, 2011, 2012, 2013, 2014 ; MacBook Retina 15": Mid 2012

Package includes 1 piece white adapter , memory card not included . 20mm approximately Micro SD TF to SD Card Kit Mini Adaptor supports Micro SD / Micro SDHC / Micro SDXC

The CF-IDE adapter converts the CF card into a 2.5" or 3.5" IDE bus and converts the CF card into an IDE hard drive. It has the characteristics of low power consumption, no noise, and is not easy to damage.

Standard IDE interface, true IDE mode, support for DMA and Ultra DMA mode (CF card must have some functions), the maximum transfer rate can reach 40MB/sec.

Can be used for Linux-based set-top boxes, routers, firewalls, diskless network clients, industrial PCs, etc.

Complies with CF Type I, Type II, and Micro-drive 40-way (2.54mm) standards.

System requirements: PC or Mac with an IDE connector; MS Windows, Mac OS, Linux operating system.

[Active Card] PCI Express 3.0 x8 Lane Host adapter powered by ASM2824 PCIe 3.0 Switch. It compatible with most motherboards, no driver required, supports X8 X16 slot motherboards, old motherboards can also easily achieve "one slot to four drives"

[Efficient Heat Dissipation] Independent chip cooling fan, together with the customized heat dissipation aluminum alloy plate, can effectively reduce the temperature and improve the stability during operation.

[Individual or RAID] Install four (4x) M.2 NGFF PCIe based (AHCI or NVMe) SSD on a single PCIe x8 Card. Allow you to use SSDs individually or in a storage pool for OS or 3rd party software RAID configuration. Soft RAID 0 speed test over 6000MB/S.This product does not include NVMe SSD Solid State Drive

[Compatible] Compatible with PCIe 3.0 motherboards, and backward compatible with PCIe 2.0 x8 or x16 slots. Works with all workstations or servers with Windows, Linux, and macOS. No driver required. Note: The motherboard BIOS must support NVMe SSD and support booting from PCIe in order to boot from a M.2 NVMe SSD on 3003K.

[Support SSD] Supports PCIe M-Key M.2 NGFF (NVMe or AHCI) 2280 SSDs such as Samsung SM951/950/960/970, Plextor M6e Series, Kingston HyperX Predator. Not compatible with a 'B' key M.2 PCIe x2 SSD or 'B' key M.2 SATA SSD.

[High Quality] The adapter is 12V to 3.3V with a 4-way 6A independent power module to meet the power supply requirements of high power SSDs. It can effectively protect the hard disk and data security.This product does not include NVMe SSD Solid State Drive

A high-speed CF card interface, ensure the speed with almost no loss

Supports CF true IDE mode/memory mode/ IO mode

Support WiFi Secure Digital Cards

Supports Windows/Mac OS/Linux

The adapter does not include a memory card

Access data on any M.2 NVMe or M.2 SATA or 2.5”/3.5” SATA devices; Compatible with all M.2 NVMe/SATA of size 2242, 2260, 2280, 22110, new 2580 & 25110

Clone your drives in multiple combinations; Use as a Data recovery tool to access drives

Transfer data between drives; Access your storage like a dock or an adapter

Use as a USB backup device when connected to your storage; Upgrade SATA OS drive to M.2 NVMe OS drive

Uses USB 3.2 Gen2x1, native USB C, USB C to C/A cable; Tool-free, no driver needed. Hot-swappable, plug & ready

Compatible with All OS with USB support, UASP, BOT, TRIM

Multi-Clone Function (standalone OR via software clone); Clone M.2 NVMe to M.2 SATA; Clone M.2 NVMe to 2.5” SATA; Clone M.2 NVMe to 3.5” SATA; Clone M.2 SATA to M.2 NVMe; Clone 2.5” SATA to M.2 NVMe; Clone 3.5” SATA to M.2 NVMe

Multi-Storage Function to mount two drives at the same time; Mount M.2 NVMe and/or M.2 SATA individually drive letter; Mount M.2 NVMe and/or 2.5” SATA individually drive letter; Mount M.2 NVMe and/or 3.5” SATA individually drive letter

Design for Windows 10/11, Mac OS X 10.10 or higher, and Linux OS