Lead2Amazon

Specially designed AiryDocky DIY Kit replacement case for Nintendo switch & Switch OLED Official Dock circuit board, NOT fit for other charging docks. (This DIY case can't be used as a charging dock individually, you have to take part the original dock to take out the circuit board chip and install it to AiryDocky replacement case)

Compact and more portable designed DIY mini dock with the same charging function as the original dock. Officially similar connectors layout makes the cables tidy during use

Made of premium ABS plastic, durable and practical. With bottom pads for non-slip support. Appropriate vent place for better cooling

Require customers with moderate hands-on skills. Get the installation video guide by searching "eXtremeRate AiryDocky DIY Case for Nintendo Switch" or "gWbhvnb5Lyw" on YouTube.

Package includes 1 full set replacement cases, 1 set bottom pads, 1 set connectors & flex cables and 1 set screwdriver tool with spare screws. (The Dock, mainboard and other hardware parts are not included)

【Attentions】Please place the black button for releasing the latch in the correct orientation. If you put it in the wrong direction, the button will get stuck and won't depress properly.

【Easy to Repair Joy-Con by Yourself】It come with complete repair kit,you can repair it by yourself in a few minutes. Bring your Nintendo Switch/Switch OLED back to life. No need to go to the After-sales Center, No need to buy a new one.

【Highest Quality】All our parts replacement will be inspected before packaging to ensure that the parts you receive are in good condition.

【Compatible model】Compatible with both Nintendo Switch and Switch OLED.

【What you Get】4 x Metal Lock Buckles, 4 x short springs for Lock Buckles, 4 x screws for Lock Buckles, 4 x Longest flat head black "Y" screws, 1 x Metal 5 inch Bit Driver, 2 x Precision Bits(1 x Phillips #000,1 x Tri-point Y00), 1 x Metal ESD Tweezers, 1 x Spudger, 1 x Opening Pick, 1 x iParto microfiber Cleaning Cloth, 1 x Brush.

【PREVENT SWITCH FROM OVERHEATING】 The cooling fan keeps your Switch stay cool in the original dock station, it is good enough to lower the temperature and protect the Switch from overheating, now you don't have to worry about having to pause due to overheating during the game, you can play for multiple hours as much as you want.

【LED DISPLAY WITH FAN SPEED & TEMPERATURE】The digital LED display shows both the current rpm of the fan and the temperature of the air exiting the console in degrees celsius. There are three buttons for easy control: Increase the fan speed, power on/off the fan, decrease the fan speed.

【ADJUSTABLE FAN SPEED】The adjustable fan speed from min 510rpm up to max 6000rpm of the radiator for Nintendo Switch is perfect for heat-exhaust and ventilation. When the fan speed is under 2400rpm, it is nearly no noisy, unless the fan speed is above 2400rpm, it will produce some fan spinning sound.

【MICRO USB CABLE & FIXED PAD & JOYSTICK CAPS】The package contains a Micro USB cable, a fixed Pad and 2 pieces joystick caps, just plug the USB cable into the back of the console stand in-between the HDMI and power cord to get power, insert the fixed Pad between the Switch and the docking console base to stable the cooling fan, the sponges on both sides of the pad are not only for anti-slip effect but also prevent your Switch from being scratched.

【LIFETIME WARRANTY】We strive for excellence with our products and our customer service. If there is any quality problem with our cooling fan for Nintendo Switch or you are not happy with your purchase in our store, please feel free to contact us and we will solve it for you in 24 hours.

All screws have a philips head and are compatible with the Nintendo Switch OLED console (model #HEG-001) only. (CAUTION: NOT FIT for SWITCH HAC-001 & Switch LITE HDH-001)

Contains the various screws that holds the console housing together.

Ideal if you have lost screws during a repair, A screwdriver is be required for installation of the screws(NOt included).

Standard Philips head screws for easier installation.

Each Pack come with: 49x Philips Head Repair Screws set. (NOTE: NOT included the screws of Joy-con controller.)

Quality Material : The back stand for Switch are made of high quality ABS material, sturdy and durable, not easy to break or deform, these replacement stand can be used for a long time.

Package Content : You will receive 4 pieces of black back stand replacements, sufficient to meet your needs for daily use and replacement.

Easy to Install : Install and replace yourself without any tools, just press the convex points at both ends of the metal clip of the kickstand into the left and right circular recesses at the upper end of the bracket storage slot.

Ideal Replacements : Our back stand replacements are perfectly compatible with broken and old original back stands. Black color is suitable for video game consoles with any color.

Warm Tips : These kickstand replacements are compatible with Nintendo Switch console, please confirm the model before ordering. (Note: The product is not original accessory of the brand it fits.)

High quality replacement analog joystick for Nintendo Switch/OLED Switch Joy-con controllers and Switch Lite.

Replaces worn or damaged analog joystick. Solves joystick drift issues and brings the controller back to life.

Only compatible with Joy-Con controllers and Switch Lite joystick.

This Joy-Con housing includes the Front, Back, Middle plate and a pair of Wrist Strap

All Buttons are not included, your need to keep all your original Joy-Con Buttons

Tools you may need to replace your Joy-con Housing: Y0 Screwdriver, Phillips Screwdriver

Package Content: You will receive 2pcs back stand replacements in different colors with 4pcs thumb grips, sufficient to meet your needs for daily use and replacement.

Premium Material: The kickstand replacements are made of high quality ABS material, sturdy and not easy to break, serving for a long time.

Easy to Use: You can install or replace these back shell holders by yourself, easy, convenient and saving money.

Thumb Grips: Coming with 4 thumb grips, you can freely choose dark or light colored one according to your preference, more stylish and attractive.

Warm Tips: These kickstand replacements are compatible with Nintendo switch console, please confirm the model before ordering. (Note: The product is not original accessory.)

🎮【Multi-Purpose Use】24 in 1 screwdriver kit include Torx, Tri tip, Philips and Gamebit. Torx security screwdriver kit is compatible for PS4, Xbox One controller, console to open. Tri wing tip is compatible for Nintendo system to take apart controller. The game bits is compatible for opening Nintendo, Sega consoles and game cartridges. This professional screwdriver set meets the requirements of repair Nintendo Switch Lite, 2ds XL, New 3ds XL, joy-con, Gameboy Color, Game cube, virtual boy.

🎮【Ergonomic Design】The firm metal prybar was excellent for removing the battery connection, prying open the console. All bits are magnetic, which can suck up the little screws easily. In additional, The threaded handle has a non-slip function and it has a built-in bearing on top that rotates 360 degrees for easier turning, giving a better machine dismantling experience for you.

🎮【High Quality Material】This professional screwdriver set is made of high quality S2 steel which has been hardened for excellent strength and impact resistance, that is more durable than CR-V steel. All precision bits are strictly machined, which effectively prevents the screw from sliding, thus protecting the screw from damage.

🎮【Additional Features】This screwdriver set have prepared 16 screws of different specifications for you as standbys, because of the original screw easier damage. At the same time, it provide a magnetizer to keep bits magnetic and a cleaning brush to keep the console and controller interior clean.

🎮【Best Combination】According to the strict market researches,this repair tool kit is able to satisfy the requirements of you to maintain the gaming devices. The set lists: Tr6 *1, Tr8 *1, Tr9 Torx security screwdriver *1, Tr10 *1, PH000 *1, PH00 *1, 3.8mm Gamebit, 4.5mm Gamebit, Y00 *1, Y2.5 *1, pry tool set , metal pry bars *1, handle *1, cleaning brush *1, Original Screws *16, magnetizer *1. Besides, Equipped with Oxford bag, the tools could be taken and stored much easily.

Replacement back kickstand holder for Nintendo Switch Console.

Replacing old, damaged or broken parts. Repair broken kickstand stand.

Repairing by yourself - comes with 1 piece mini screwdriver. Save time and easy installation.

Material: Hard plastic with metal buckle clip

Each package includes 1 piece Kickstand Holder + 1 piece screwdriver