Lead2Amazon

【Double Sided Mounting Tape】: This thin double tape is 33ft in length, 0.4 inch in width and thickness is 0.88mm. The delicate size is great for mounting LED strips, pictures frame, posters, and DIY crafts. It can be used to replace rivets, screws, spot welds, and messy liquid adhesives

【Heavy Duty Tape】: Consists of acrylic foam, which strength is 3lb per inch. Great elasticity can be extended according to your requirements without break. Affected by special pressure-resistant materials, the initial viscosity of the tape is relatively small. The viscosity will gradually increase over time and reaches a maximum after 72 hours. The more tape used, the stronger the load bearing

【Waterproof and Temperature Resistance】: Great water and moisture resistance when the curing process is done. Great for kitchen or bathroom, can resist high temperature, heavy rain, rub, suitable for indoor and outdoor use. For example, it will not fall off if it is attached to the car window in all season

【Multipurpose Mounting Tape】: Small size, big purpose. EMITEVER two sided tape wall tape are versatile, such as door edges, signs, wall hooks, carpet fixing, license plate, DIY, and decoration for automobiles, windows, homes, offices

【Easy To Use】: This foam tape is easy to install and removal, and bonds to a wide variety of smooth and clean surfaces such as glass, metal, plastic, tile, wood, marble, and more! Not recommended for wallpaper, fabrics, textured walls, brick, and other rough and non-stick surfaces

Lock and Seal Fasteners: Prevents loosening of metal fasteners caused by vibration on engines, machinery, and vehicles

Prevents Rust and Corrosion: Moisture-resistant formula protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers

Permanent Fix: Permanent seal prevents tampering and is only removable once cured by heating parts up to 500°F (260°C)

Easy and Quick: Sets in 10 minutes and fully cures in 24 hours

For Large Fasteners: Heavy duty, high-strength formula for use on threads for nuts and bolts up to 1 inch (25mm)

Product Description:This is a heavy-duty two-component high-temperature resistant epoxy repair glue with the consistency of mayonnaise, 1.76oz capacity with reusable cap, remaining glue can be reused many times, fixed ratio (1:1) syringe, non-toxic and non-irritating odor, it is a very good cold welding glue.

Excellent Characteristics: Vicpricme Metal Glue has excellent temperature and oil resistance, chemical resistance, as well as excellent impact resistance and strength, can be used in cars, boats, water tanks, fuel tanks, water pipes, heaters, grills, silencers, floor tiles, metal tiles to fill leaks, marble and other engineering cracks or holes for a very perfect repair, with a super strong firmness, strong as steel.

Performance Introduction : 5 minutes to solidify, 24 hours to fully cured,✔ can be welded together with metal aluminum, copper, iron, stainless steel, wood, plastic, glass and other different materials at the same time, curing strength up to 4680 PSI, can be stable between -65 ℃ To 287 ℃, cured gray, can be drilled, sanded, painted, to help you repair the project as perfect as the first time.

Reason for Recommendation: Vicpricme Heavy Duty Epoxy Metal Super Glue is extremely cost-effective while being widely applicable for repairing/fixing radiators, hoses, tanks, sumps, oil drums, cracked bumpers or motorcycle fairings, broken headlight brackets, broken RV paneling fences, vases, swings, and other high-strength, everyday projects.

Method of Use:Use a pusher to push the appropriate amount of adhesive out onto a flat surface, mix well with a stirrer (usually 5 minutes, otherwise the bonding effect will be affected), then apply the mixture to the clean surface of the material to be bonded, place the part to be welded in the proper position as needed, and leave it horizontally for 24 hours for complete curing! (For pressurized items, allow to fully cure before use）

Powerful Construction Adhesive: Experience unprecedented bond strength with Vereclue heavy duty construction adhesive. Concrete glue is specially used to repair peeling ceramic tiles, mosaics, marble, etc. Its super strong adhesive force is very suitable for bonding on various rough surfaces

Available All-Weather: Cement glue for concrete are extremely weather resistant and can be used both indoors and outdoors. From freezing temperatures as low as 40°F to scorching temperatures as high as 104°F, Vereclue Concrete adhesive maintains its stickiness without fear of peeling or cracking

Easy to Use: Say goodbye to complicated tools, no caulking gun required. Our Construction glue has a medium consistency, coupled with the pointed cap, allows you to accurately control the amount of glue every time you use it

Versatile Construction Adhesive Heavy Duty: Tile glue for floor is ideal for repairing peeling tiles, and mosaics, and can be used on a variety of surfaces, including drywall, concrete, ceramic tile, masonry, decks, landscaping, tubs and showers, and more. Even on rough vertical walls, concrete glue adhesive can still stick the tiles firmly and will not slip off

Intimate After-Sales service: If you are not satisfied with the concrete adhesive outdoor you received, or the stone adhesive outdoor spilled due to transportation, you can contact us at any time and we will provide you with satisfactory service

Product Description Automotive Metal Repair glue is a two part, heavy duty, high strength epoxy metal putty that comes in a 1.76 ounce bottle and includes a set of pusher and squeegee mixed at a 1:1 ratio. Metal Epoxy Repair glue is a liquid weld for metal, Metal cold welding glue for metal, and can also be used to fill metal holes with metal filler putty. metal glue for metal glue heavy duty waterproof weld repair . glue for metal to metal can be used as a general purpose metal adhesive to repair boats, automobiles, hardware tools, fuel tanks, pipes, heaters, water tanks, and cracks in hard plastics, car and motorcycle shells

Usage Scenarios Metal Repair glue meets the needs in most daily use scenarios, has a low cost of metal repairs and guaranteed quality. It can be cured at room temperature and has good abrasion resistance, high temperature resistance, low temperature resistance, waterproof, oilproof, corrosion resistance and impact resistance. Whether you're shaping, tapping, filing, sanding or drilling, this metal-to-metal heavy duty glue meets a wide range of repair needs. It is a high-strength, heavy duty metal repair glue epoxy metal binder that replaces traditional complex welding methods and liquid metal is a universal repair adhesive for engineering repairs

Scope of application metal epoxy Putty is suitable for adhesive repair welding of metals, aluminum alloys, cast iron, stainless steel, ceramics, fiberglass and many plastics. liquid weld for metal can be used not only for repairing fuel tanks, pipes, exhaust pipes, molds, plug holes, water tanks and plastic buckets, but also for boats, automobiles, heaters, fiberglass plastics, metal fences, welded car bumpers and motorcycle metal crack repair welding glue

Why Recommend It This metal epoxy glue has a wide range of applications, excellent performance, weld bond effectiveness, to meet your needs in most usage scenarios, with an upgraded formula for faster and more efficient setting time compared to other metal glue heavy duty weld similar products

How to use Heavy Duty Metal Glue is very simple to use. First, clean the surface before use. Then, push out an appropriate amount of metal filler glue with a pusher in the ratio of 1:1 on a flat surface and mix it well with a stirrer (usually for 5 minutes, otherwise the bonding effect will be affected). Finally, apply bond to the surface. It will be initially set in 5 minutes and fully cured after 24 hours. (For pressurized items, it is necessary to wait until it is fully cured before use)

WHAT This is a two-component heavy duty high temperature resistant epoxy resin glue with capacity of 1.76oz for each, including a set of pusher, scraper and mixed ratio 1:1 syringe. It is a good nontoxic and nonirritating odor cold welding glue that can be used for boats, cars, Oil tanks, water pipes, heaters, vases, fences welding car bumpers, motorcycle crack repair.

This epoxy metal glue can meet your needs in most usage scenarios at a very low cost and with guaranteed good quality. can be cured at room temperature, easy to use, good wear resistance, heat resistance, corrosion resistance and impact resistance. is a high strength epoxy adhesive，Can replace traditional complex welding methods for project repair.

WHAT CAN BE DONE 5 minutes to set; 24 hours to fully curing; simultaneously weld different materials together, such as metal aluminum, copper, iron, stainless steel, wood, plastic and glass; cured strength up to 4680PSI; be stable between -65 ℃ ~ 287 ℃; cured until gray color; can be drilled, sanded, spray paint colored until your items become original appearance.

WHAT CAN BE USED FOR Excellent impact resistance and strength helps to recover your car or boat cracks and holes. It is also suitable for repairing/fastening radiators, water pipes, tanks, pools, oil drums, cracks in bumpers or motorcycle fairings, broken headlight brackets, torn RV paneling fences, vases, swings, etc.

HOW TO USE Push out appropriate amount of glue on a flat surface, then use the stirrer to mix evenly (usually 5 minutes, otherwise affect the bonding). Apply the mixture to clean surface of the material to be bonded. Place the parts to be welded in the appropriate position as needed, and leave it horizontally for 24 hours! For pressurized items, it is necessary to wait until they are completely solid before using.

INFORMATION : 1.76oz 2 parts 5 minutes setting epoxy glue (with pusher and stirrer), non-toxic and non-irritating smell, fixed pusher setting ratio (1:1), can be used to repair all kinds of metal, plastic, rubber, wood and other objects.

ATTRIBUTE : 5 minutes to set 24 hours fully cured, cured gray, can be drilled, filed, sanded, and painted, strength up to 4680psi, forming a durable, metallic toughness of the bond, can be stable between -65 ℃ ~ 287 ℃, not afraid of acid, chemical, seawater and wind, and sunshine

CAN DO : It can simultaneously bond a variety of materials, such as metal, plastic, rubber, wood, PVC, glass, aluminum, stainless steel, with high strength, and vibration resistance, making it often used in automotive repair, ship repair special glue, the ultimate cost performance makes it widely used in everyday home repairs, such as fence welding, flower bed repair, door sign bonding, bicycle, motorcycle repair, repairing cracks in cast metal parts or porous leakage

WHY MUST IT BE The extreme cost-effectiveness and excellent properties allow you to restore the item to its original effect with minimum cost and is extremely stable and once cured, will have very high strength. Non-toxic, non-irritating odor, fixed pusher operation, precise and hygienic.

HOW TO USE IT : Use the pusher to push out the appropriate amount of glue on a flat surface, use the stirrer to mix it evenly (usually 5 minutes), then apply the mixture to the clean surface of the material to be bonded, place the parts to be welded in the appropriate position as needed, and leave it horizontally for 24 hours! (For pressurized items, it is necessary to wait until they are completely solid before use)

⭐SUPPLIER OF QUALITY ADHESIVE: CYAFIXED has been striving to be the guardian of bonding projects since the brand's inception, we are committed to developing a wider range of adhesives, the new thread locking adhesive is now online!

⭐THE KEY TO PROTECTING THREADS: CYAFIXED Threadlocker High Strength is an anaerobic threadlocking material that protects threads from corrosion and prevents loosening due to component vibration.

⭐PERMANENT FIXING: CYAFIXED Red Threadlocker cures in 10 minutes and is complete hardening within 24 hours. It seals permanently, prevents tampering, and can only be removed after the part has been heated to 500°F (260°C) to cure.

⭐RECOMMENDED APPLICATION: For heavy-duty threaded connections of nuts and bolts up to 1" (25mm), whether you are installing valve covers, water pump or fastening furniture, motorbike, automotive or bicycle screws, CYAFIXED 271 Thread Locker is the perfect solution for you.

⭐SAFETY AND SATISFACTION GUARANTEE: We recommend working in a well-ventilated area and wearing goggles. If you are not satisfied with our product while using it, we promise 100% refund or replacement!

Brand: Loctite

Loctite Number: 272

Threadlocking Strength: High

Color: Red

Lock Tight Thread Locker: Can fasten bolts & nuts for a long time to avoid loosening due to vibration or shock, Even in extreme environments such as high vibration, high humidity, ultra-high or ultra-low temperature. A must-have for extending the service life and safe use of metal fasteners! 

Prevents Rusting / Corrosion / Leakage: Unique anaerobic solidification function of flowing liquid ensures tight contact and perfect sealing of bolts & nuts. Avoid the additional cost of purchasing various specifications of washers and traditional locking screws.

Widely Used: Suitable for Tightening and Maintaining all Metal Screws Below M32, including Automobiles, Motorcycles, Bicycles, Furniture, Household Appliances, Electronic Digital Products, Industrial Equipment, etc. Only Need a Bottle of Thread Locker to Ensure the Normal & Safe Operation of your Equipment.

Simple Operation: Just apply a dab of the thread locker to the fixing position of the bolt & nut, And then it will Start to Cure in 10 Minutes, And your items can be used normally after 24 hours of fully cured. The peak nozzle design with pull-up opening and downward pressure sealing can easily maintain the long-term effectiveness of the glue and enable precise and controllable application. 

Wise Choice: Same formula, Same using experience. American brand, Chinese OEM. Please believe in the power of ESKONKE brand, We strive to provide the best quality products and the best customer experience.