Lead2Amazon

The AA Battery Holder suit for 4x 1.5V AA batteries, and ouput voltage is 6 volt.

I Type Battery Snap Connector with hard plastic shell, 15 cm / 6 inch length, easy to solder or connect.

Made of thicken plastic shell, copper conductor and nickel-plated steel spring, to ensure effective good contact, sturdy and durable.

4 AA Battery Case Size is 57 * 32 * 29mm, widely used in electronic circuit experiment, Arduino projects, led devices, household appliances etc.

Package includes 2pcs 4x AA Battery Holder, 2pcs I Type Battery Snap Wire Leads.

Package Includes 2 Pairs of Brass Battery Terminal Connection Clips, 2 Pairs of Red and Green Cotton Gaskets and 4 Iron Washers; PLEASE confirm its detailed size on the third picture before purchasing!!

Battery terminal connectors are made of pure copper material, long-lasting, sturdy, rustproof, wear & corrosion resistant, not easy to fade or deform, has good electrical conductivity and power transmission efficiency, helps to reduce the transmission loss of voltage and current.

Easy and convenient to install or remove, comes with corresponding screws, nuts and washers for a secure and quick installation, connecting the copper clips directly to the battery post can increase current output, included washers are used to pad the base of the battery terminal for corrosion protection.

Positive and negative battery terminal connector clamps are directly connected to the battery, resulting in higher current output without resistance, ensures perfect power connection, increases strength and stable performance, protects the battery effectively and prolongs its life.

This set of versatile copper battery terminal clips applys to most terminal batteries, suitable for battery of cars, caravans, vans, motorcycles, motorhomes, ships, boats, trucks, trailers, vehicles, SUV, RV, ATV and so on, meeting different using needs.

9v battery snap to double alligator clip cable is great for replacing old connectors corroded by battery leaks, replacing damaged battery connectors on electronics

9V battery snap to alligator clips cable easily connecting power to small circuit boards, motors, LED lights and other widgets

Color-coded to indicate polarity, red alligator clip for positive, black alligator clip for negative

Plug Type: T-Type, Mini Alligator Clip Plug to 9V Battery Clip, Wire Gauge: 26AWG Tinned Copper Wire

Widely suitable for connecting power modules, breadboards, LED lights, electrical engineering, etc.

Package: Includes 5 pcs I TYPE 9v battery connector; All these 9 volt battery connectors are with bare leads, all these 9 volt battery clip are with hard buckle plastic housing, no 9V battery is included in the package.

Good Material of 9v battery clip: Very Hard Plastic ABS and Metal to make the sturdy house for 9v battery snap connector.(Means these 9v battery clip connector is designed not easy to pull apart when removing from the battery, they have longer life than other 9v snap connector that are just fixed on soft material)

Size of 9 volt battery clips with wires( Each ): 2.4 x 1.2 x 0.7cm/0.94" x 0.47" x 0.28" with wire length approx. 15 cm/ 5.9 inches; Connection wires color of 9v connector: black and red.

Function: These 9 volt battery connectors with clips are easy replace a broken battery connector on your electronic device, making removable power connections in home projects, they should be part of any experimenter or maker's kit.

Attention: All these 9 volt battery clip connector are only suitable for 9v battery and 9v battery holders, please make sure this when buying this item, please do not apply them when your hands are wet.

Versatile Battery Holder - KUJOBUY 2 AA battery holder with switch is ideal for various DIY projects, providing a reliable power source with its 2X 1.5V AA battery configuration. Ideal for AA battery pack needs.

Convenient On/Off Switch - The built-in on/off switch allows for easy control of your battery-powered devices, making it a practical addition to your AA battery case collection.

Compact and Lightweight - With a body size of 2.303in x 1.276in x 0.575in (58.5mm x 32.4mm x 14.6mm) and weighing only 7g (0.247oz), this small battery box is easy to incorporate into any project.

Durable Construction - Made from high-quality ABS plastic, this battery holder is designed to withstand regular use while ensuring secure connections with its wire leads. Ideal for a variety of applications including AAA battery holder setups.

Easy Installation - Featuring 5.7"/14.5cm wire leads with tinned wire ends, this 2 AA battery holder ensures quick and hassle-free connections, making it a go-to choice for your AA battery holder needs.

Package includes 8Pcs and 4 types battery holder case boxes: (1) 1 aa battery holder,(2) 2 aa battery holde,(3) 3 aa battery holder,(4>)4x 1.5V 6 volt battery holder

Dimensions of AA battery holder(L*W*H): (1)single aa battery holder with leads: 2.248" x 0.669" x 0.539"/5.71cm x 1.70cm x 1.37cm (2)2 aa battery holder with leads: 2.303" x 1.276" x 0.575"/5.85cm x 3.24cm x 1.46cm (3)3 aa battery holder with wires: 2.287" x 1.906" x 0.567"/5.81cm x 4.84cm x 1.44cm (4)4aa battery holder with wires: 2.248" x 2.457" x 0.622"/5.71cm x 6.23cm x 1.58cm

DIY Extension: Join one 2 X 1.5V aa battery holder and one 4 X 1.5V aa battery holder can get a 9V aa battery holder; Join one 4 X 1.5V aa battery holder and one 4 X 1.5V aa battery holder can get a 12V aa battery holder. so, 9Volt aa battery holder and 12Volt aa battery holder are also on your hands.

AA Battery Holder Wire Leads: all aa battery case holder with leads, they are tinned wire end; Wire Length: 5.9"/15cm; Cable Diameter(count in the PVC isolation around the wire): 0.0393"/1mm; Cable Color: red and black

Weight of One AA Battery Holder: (1)single aa battery holder: 0.141oz/4g (2) 2 aa battery holder: 0.247oz/7g (3)3 cell aa battery holder: 0.388oz/11g (4) 4 cell aa battery holder: 0.459oz/13g

-You will receive 4pcs aa battery holder 2 cells.

-Battery NOT included.

-Designed for 2 cells aa battery holder.

-With 2pin alligator clip wires, and ON/OFF switch.

-You can find more battery case via "Visit the DIYmalls Store"

Easy Connection: Ring terminals can be left connected to the battery for an easy and convenient connection when you need to charge again

Compatible Units: For use with 12 Volt model Battery Tender Battery Chargers; ideal for batteries that are difficult to access

Quick Disconnect: This 18 inch black quick disconnect harness makes it easy to connect it and forget it while your vehicle battery charges

Safe Charging: This accessory cable is built with a 7.5 AMP fuse to protect your batteries in case of current overflow

Multipack Options: If you have multiple batteries to charge at once, Battery Tender Ring Terminal Accessory Cables are also available in a pack of 25

Premium Material: The paper clip holder is crafted with high-quality metal mesh, ensuring strong compression resistance and preventing deformation, resulting in a more durable product.

Space-Saving Design: Our paper clip holder utilizes space design principles, featuring a square three-dimensional appearance that maximizes storage capacity without leaving gaps. This innovative design ensures optimal space utilization, resulting in a more orderly and tidy desktop.

Exquisite Craftsmanship: MaxGear meticulous attention to detail highlights the superior quality of our product. The smooth ABS coating not only enhances tactile comfort but also prevents scratches, improves corrosion resistance, and ensures a longer service life.

Non-slip Base: Our paper clip organizers are equipped with 4 small EVA liner bottoms, ensuring your desktop remains scratch-free from metal contact. Enjoy a noise-free and non-slip surface for effortless and quiet movement.

After-sales Service: We provide 12-month after-sale service for you. If you need assistance in terms of products or service, please feel free to contact us.

Car Battery Terminal - Quality Material: Battery terminal connectors are made of pure copper material, long-lasting, sturdy, rustproof, wear & corrosion resistant. Car battery terminal connectors kit not easy to fade or deform, has good electrical conductivity and power transmission efficiency, helps to reduce the transmission loss of voltage and current.

Negative and Positive Car Battery Cable Terminal - Easy to Install: Easy and convenient to install or remove, comes with corresponding screws, nuts and washers for a secure and quick installation, connecting the copper clips directly to the battery post can increase current output, included washers are used to pad the base of the battery terminal for corrosion protection.

Battery Terminal Connector Clips - Excellent Performance: Battery terminal wire clamp has superior conductivity, reducing voltage and current transmission loss. Advanced battery clamps can effectively protect the battery terminal from rust and prolong the battery life. Perfect for power connection, the storage battery and more, stable performance and high reliability.

Positive and negative battery terminal connector clamps are directly connected to the battery, resulting in higher current output without resistance, ensures perfect power connection, increases strength and stable performance, protects the battery effectively and prolongs its life.

Pure Copper Battery Connection Clip - Wide Range of Uses: This battery terminals set of versatile copper battery terminal clips apply to most terminal batteries. Copper battery terminals suitable for battery of cars, caravans, vans, motorcycles, motor-homes, ships, boats, trucks, trailers, vehicles, SUV, RV, ATV and so on, meeting different using needs.