Lead2Amazon

High build and fill

THIS EPOXY THICKENING additive maximizes epoxy's adhesive properties in hardware bonding or wherever high-cyclic loads are expected. Blended with epoxy for an excellent gap filler, to creating structural fillets, or wherever you need an especially strong bond. Blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy, it will cure to an off-white color.

HARDWARE OR STUD BONDING is a popular use of this filler. Even small amounts of this 404-High Density added to a blend of epoxy resin and hardener will reduce creep in the cured epoxy. Mix this filler into liquid epoxy to create slurry. It should be thick enough to stay in a horizontal hole, but not too thick. (Blending too much filler into epoxy can trap air.)

THICKEN EPOXY with this high-density filler to make a non-slumping adhesive that will bridge large gaps. It will strongly bond wood joints, saving you the time and labor involved in crafting tight joinery.

FOR MAXIMUM STRENGTH add only enough filler to completely bridge gaps between surfaces without sagging or running out of the joint, pilot hole, or gap. A small amount should squeeze out of the joints when clamped, or when hardware is inserted. For thick mixtures, don’t fill the mixing cup more than 1/3 full of epoxy before adding filler.

THE AMOUNT OF FILLER you add controls epoxy's viscosity. For hardware bonding, mix 404 High-Density filler into epoxy to create a moderately loose slurry. It should be thick enough to stay in a horizontal hole, but not too thick. The chart below offers guidelines to the differences between neat (unthickened) epoxy and three popular consistencies of thickened epoxy: "catsup," "mayonnaise," and "peanut butter."

High build and fill

Unique Formula: This body filler uses EcoResin technology for optimum sanding results

Easy Sanding: Evercoat auto body filler provides easy sanding with 80 grit sandpaper

Non-Sag Formula: No need for finishing putty thanks to excellent filling properties

Versatile Surfaces Application: Our products are applicable on steel, aluminum, fiberglass, and more

Automotive Body Repair: We provide high-quality putty, primer, and body filler formulations

PRE-THICKENED FIBER REINFORCED POLYESTER PUTTY for high-strength structural filling, fitting, bonding, bedding & radius forming; great for boat building & repair on fiberglass, wood, metal, polyester laminates & core materials; use above or below waterline

MARINE FILLER has premium polyester resin and long strand glass fibers for strength, impact resistance & elasticity; ideal for bonding decks, stringers & liners to hulls; filleting and bonding bulkheads, and filling screw holes, bolt holes, chips & dents

EASY TO MIX, EASY TO APPLY: For a 100g mass, catalyze with 1% MEKP to get 15-20 min. of working time at 70°F (14 drops of MEKP per ounce of putty); adjust amount of catalyst to control working time; paste-like consistency is easy to spread and won’t sag

FAST-SETTING STRUCTURAL ADHESIVE is ideal for fiberglass & gelcoat repair; for cosmetic fairing, overcoat Polyester Structural Repair Putty with TotalBoat Polyester Fairing Compound; it sands smooth easily & can be finished with TotalBoat Gelcoat with wax

AVAILABLE IN QUART AND GALLON KITS: Includes 2 oz. MEKP. This versatile bonding compound can bond dissimilar materials and can also be used in many home, auto, construction, and aerospace applications, with no shrinking or cracking, even in bulk fillings

Alkali and Ultraviolet resistant

Gives uniform color throughout mixed cementitious material

Can be mixed with concrete mixes, mortar mixes, sand mixes and most cement based products

Used for pigmenting portland and masonry cement products

Use 1 package of Sakrete Cement Color per 80 pound (36.3 kg) or 60 pound (27.2 kg) bag concrete, sand, or mortar mix. One package of Cement Color will yield a darker color in a 60 lb bag than in an 80 pound bag. Use less color if a lighter shade is desired.

High performance laminating contact adhesive

Adheres, sheet metals, such as stainless steel, aluminum, cold rolled steel and many plastics to numerous other substrates

High performance laminating adhesive

Excellent moisture and heat resistance and will perform up to up to 300°F/148°C

Available in tubes, cans or pails

Premium Epoxy: RotFix is an ultra-low viscosity, solvent-free, low-odor wood epoxy that penetrates deeply into soft, punky wood substrates

Easy To Apply: Brush our penetrating epoxy over the repair area; Some wood substrates are highly porous and will absorb the RotFix rapidly

Versatile Application: Our epoxy resin hardens punky wood, and it can also be used as a stand-alone wood consolidant product for firming up punky wood prior to primer or paint application

Curing: At 70°F our wood repair epoxy can be sanded with 150 grit sandpaper in 24 hours; Make sure that RotFix is completely deglossed before applying primer

Tips and Tricks: RotFix epoxy wood sealer does not kill rot fungus or keep it from returning; For long-term protection from rot and decay, first use EndRot Borate Powder

PROFESSIONAL CUTTING COMPOUND - Sonax CutMax removes marks of P1500 grit or finer, including paint defects, scratches, dust inclusions, and severely scratched or oxidized paint work without damaging the clear coat

HIGH GLOSS FINISH - Polishing formula leaves a high gloss OEM paint finish with hologram free paint surface

SILICONE & DUST FREE - Water based formula will not dry out like other compounds, contains no solvents, silicones or petroleum and creates no dust during the compounding process so polishing pads stay cleaner longer

VERSATILE - One of the most flexible compound / polishes available in the market that works beautifully on all clear coats and paint finishes

SAVES TIME - The single step process makes paint corrections far less labor intensive and time consuming than traditional claying and compounding - recommend applying with a rotary polisher and a Sonax 6 inch orange polisher pad (sold separately)

Premium Epoxy: SculpWood Putty a non- shrinking, two-part epoxy putty compound ideal for filling voids often associated with rot repair applications

Easy To Apply: Once RotFix has been applied, pack the epoxy putty into the cavity, avoiding gaps and air pockets; Slightly overfill the cavity with wood putty

Versatile Application: It has tenacious adhesion to wood substrates when paired with our RotFix epoxy; Compatible with most water/solvent-based primers and paints

Tips and Tricks: Use lacquer thinner, denatured alcohol, or white vinegar for cleanup of uncured moldable epoxy putty

Safe To Use: Our wood putty is solvent-free and once cured, it sands like wood and machines easily