Lead2Amazon

Keep Fasteners Secure and Tight:GNEOCO lock tight threadlocker has strong adhesion and can lock tight screws ,nuts and metal fasteners to prevent loosening due to vibration

Value 3 Pack Threadlocker: 3 x 10ml bottles of thread locker, small packaging are easy to store and can be used for a long time without drying out or leaking. Medium-strength blue threadlocker 242 243 and high-strength red threadlocker 271, providing a wide range of options for your various needs.

Easy to Use: Simply apply the threadlocker evenly to the thread, tighten the nut, and cure initially for 20 minutes, then your Items can be used normally after fully cured in 24 hours

Wide application : Whether you're installing a valve cover, water pump, or just tightening down some furniture screws, our adhesive solution can be used in various automotive, industrial, and furniture applications.

Why The Bottle Is Not Full: Threadlocker will solidify in anaerobic conditions, so the bottle is half-full to ensure the threadlocker remains liquid, prevent solidification and hardening.

2 Pack Threadlocker: Thread lock has strong adhesion and can fix screws, nuts, and metal fasteners to prevent loosening due to vibration. Medium-strength blue threadlocker 242 and high-strength red threadlocker 271, providing a wide range of options for your various needs

Sealing and Leakage Prevention: Using thread locker cores instead of solid gaskets, close contact, perfect sealing, and effective leakage prevention

Prevents Rust and Corrosion: Protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers

Easy to Use: Simply apply the threadlocker evenly to the thread, lock tight the nut, and cure initially for 20 minutes, then fully cure within 24 hours

Wide Application: Whether you're installing a valve cover, water pump, or just tightening down some furniture screws, blue threadlocker provides support and reduces screws from coming loose. Our screw glue can be used on a variety of automotive, industrial and furniture applications

All-purpose, medium strength threadlocker will lock and seal while preventing parts from loosening due to vibration

Gel Twist Applicator provides accurate dispensing, putting the threadlocker where you want it

Gel formula provides 'liquid-reliability' without drips, globs, mess or waste, allowing for easy overhead and vertical applications

Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm)

Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs

Threadlocker: Thread locker has strong adhesion and can fix screws, nuts, and metal fasteners to prevent loosening due to vibration.

Sealing and leakage prevention: Using thread locker cores instead of solid gaskets, close contact, perfect sealing, and effective leakage prevention.

Prevents Rust and Corrosion: Protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers.

Easy to use: Simply apply the threadlocker evenly to the thread, tighten the nut, and cure initially for 20 minutes, then fully cure within 24 hours.

Wide application: Whether you're installing a valve cover, water pump, or just tightening down some furniture screws, blue threadlocker has you covered. Our screw glue can be used on a variety of automotive, industrial and furniture applications.

Lock It In - Permatex Threadlocker Blue All-purpose Formula Locks And Seals Bolts To Prevent Parts From Loosening Due To Vibration And Protects Threads From Corrosion

Medium Strength- Permatex Threadlocker Blue Is An Anaerobic Threadlocking Material, That Cures With Active Metals And The Absence Of Air To Form A Strong Bond That Resists Leakage, Shock And Vibration

Perfect For Most Jobs- Permatex Threadlocker Blue Is Ideal For All Nut And Bolt Applications 1/4" To 3/4" (6mm To 20mm) And Eliminates The Need To Stock Expensive Lock Nuts And Lock Washers

Easy Disassembly- Permatex Threadlocker Blue Is Removable With Hand Tools Which Allows You To Easily Remove Bolts And Access Jobs Multiple Times Without Problem

Suggested Applications- Valve Cover Bolts, Water Pump Bolts, Oil Pan Bolts, Drive Shaft Bolts, Rocker Arm Adjustment Nuts, Carburetor Studs, Intake Manifold Bolts

OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.

RELIABLE ADHESION. High strength, medium viscosity anaerobic adhesive for slip fit assemblies.

RESISTANT. Replaces set screws, clamp rings, snap rings, wheel bearings, idler shaft, fit bearings.

FORMULATED. Selection of viscosity, gap-filling ability, flexibility and strength characteristics.

EASY TO USE. Adheres in 10 minutes at room temperature. Seal joints to stop leakage and prevent fretting and corrosion.

Adds 3,000 PSI holding power on slip and press fit assemblies

Well-suited for permanently locking studs and press fits

Replaces set screws and snap rings and also locks against vibration loosening

May require heat or special tools for removal

Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts

Brand: Loctite

Loctite Number: 272

Threadlocking Strength: High

Color: Red

Lock Tight Thread Locker: Can fasten bolts & nuts for a long time to avoid loosening due to vibration or shock, Even in extreme environments such as high vibration, high humidity, ultra-high or ultra-low temperature. A must-have for extending the service life and safe use of metal fasteners!

Permanent Locking & Easy Disassembly: Both Blue & Red Threadlocker can Permanently lock tite Fasteners due to Their Stable Chemical Properties. Red Threadlocker Require Heating due to Their High Disassembly Torque to be Disassembled with Tools, While Blue Threadlocker can be Disassembled with Tools at Any Time.

Prevents Rusting / Corrosion / Leakage: Unique anaerobic solidification function of flowing liquid ensures tight contact and perfect sealing of bolts & nuts. Avoid the additional cost of purchasing various specifications of washers and traditional locking screws.

Widely Used: Suitable for Tightening and Maintaining all Metal Screws Below M32, including Automobiles, Motorcycles, Bicycles, Furniture, Household Appliances, Electronic Digital Products, Industrial Equipment, etc. Only Need a Bottle of Thread Locker to Ensure the Normal & Safe Operation of your Equipment.

Simple Operation: Just apply a dab of the thread locker to the fixing position of the bolt & nut, And then it will Start to Cure in 10 Minutes, And your items can be used normally after 24 hours of fully cured. The peak nozzle design with pull-up opening and downward pressure sealing can easily maintain the long-term effectiveness of the glue and enable precise and controllable application.

UNSHAKEABLE BOND: Our high-quality threadlocker creates an unbreakable bond between nuts, bolts, and screws, ensuring your projects stay firmly in place.

PROFESSIONAL-GRADE PERFORMANCE: Engineered for industrial and DIY applications, our thread adhesive delivers superior locking strength, offering unmatched reliability compared to other leading brands.

EASY APPLICATION: With precise control, our threadlocker flows smoothly, preventing mess and overflow. Just apply, assemble, and let it work its magic. ADD TO CART now.

VERSATILE SOLUTION: From mechanical projects to automotive repairs, our threadlocker is a reliable choice for securing fasteners, offering peace of mind.

HEAVY-DUTY RELIABILITY: Experience the difference of our heavy-duty formula that withstands vibrations, shocks, and temperature variations. Count on it for rock-solid results.