Lead2Amazon

JB WOODWELD: Is a fast setting two-part epoxy system formulated for wood bonding and repairs. It provides a lasting permanent bond that is stronger than the wood!

THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to traditional torch welding. It’s designed to be extremely effective in even the harshest environments. Once it sets, it's tougher than steel.

SIMPLE TO USE: J-B WoodWeld has a 1: 1 mixing ratio, sets in 6 minutes & cures in 1-3 hours. Rated at a tensile strength of 1800 PSI. When fully cured it can be shaped, tapped, filed, sanded & drilled.

VERSATILE AND DEPENDABLE: Perfect for indoor or outdoor use; furniture, doors, windows, trim, molding, decks, wood, restoration projects, rotting wood repair and more.

NO PROJECT TOO BIG OR TOO SMALL: We have all the products you need to get the job done right. JB Weld always delivers the legendary performance of the World's Strongest Bond.

Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry

High-tack paste resists moisture for application in damp environments and can be used in vertical applications

Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F

Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F)

Meets ASTM C881-99

Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry.

PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements.

PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete.

PC-Concrete is the best solution for permanent concrete repair.

Bonds Wet Surfaces: Permanent epoxy can be applied and cured underwater and ideal for projects requiring high bonding strength on surfaces exposed to water immersion

Double Syringe Applicator: Conveniently dispenses two-part formula resin and hardener in equal amounts to produce a tough, rigid, high-strength bond

Fast and Easy: Unique formula sets in just 2 hours and fully cures in 24 hours

Waterproof and Resilient: Does not shrink and is highly resistant to water, solvents, and large impacts and can be easily sanded or machined

Versatile Use: Cures to a white finish ideal for repairing PVC, copper, brass and galvanized pipes and bonds to metal, concrete, glass, fiberglass, ceramic, wood and certain rigid plastics

Oatey 31270 Fix-It Multi-Purpose Epoxy Putty, 4 Oz, Box, Beige, Sulfurous, Solid, Gray

Provides a clean, positive seal on threaded connections

A high density product that resists tearing and stretching for easy, efficient application

Available carded or packaged bulk on spools

Complies with Military Spec. No. T-27730A and UL 31 RO

High Strength Epoxy Putty Wood: Fully cured to form a hard surface, providing a hard permanent restoration. Heat, corrosion, and water resistant, it won't shrink or crack

2 Parts Epoxy Putty is Versatile: Bonds and repairs wood, hard plastic, metal, stone, ceramic, glass, acrylic, sculpture, and more. Can be sanded, painted, drilled after fully cured

Quick Leak Repair Epoxy Putty Steps: Knead two parts of epoxy putty according to the ratio of 1:1 until the color is the same, and there will be slight heat at this time. Then stick to the position that needs to be repaired, and press firmly. Preliminary curing in 1 hour, complete curing in 24 hours

Epoxy Putty Stick Characteristics: Completely mixed evenly, the color is BROWN, and the temperature range is -50°C to 120°C. Can be used to glue, fill, and repair most items, providing long-lasting and effective repairs

Epoxy Steel Putty: Epoxy putty wood filler is composed of epoxy resin and hardener, which has strong adhesion and strong surface. If you encounter problems during use, you can contact us through amazon as soon as possible to provide you with professional solutions

Easy to Use 2 part hand moldable epoxy putty hardens in 50-60 minutes with final steel hard cure in 12 hours

Can cure underwater.

Use for pool and SPA repairs (plaster, gunite or fiberglass), Boats, RV, Auto, at work and around the house

Use on all types of plumbing fixtures and ceramics, tubs, toilets, sinks, tiles, caulking, fiberglass, sculpture, taxidermy, doll repair, carving, metal, pump housing, pool decks and broken tiles

Made in the USA. Putty that is cold or below 70F will be harder to mix because it is stiffer and will take a little longer to set.

GLOSSY FINISH – Achieve a clear gloss, crystal-clear epoxy finish for table top, bar table, and office art. Enhance heat and scratch resistance while preserving the desired look. Experience maximum durability with our New Ultimate Top Coat Gloss formulation.

EXTREME PROTECTION – resin polishing kit is a unique form of epoxy that works like no other! Once you’ve finished your epoxy project, simply roll your Ultimate Top Coat onto your surface for unparalleled scratch-resistance, heat-resistance, and UV-resistance!

MAXIMUM DURABILITY – Highly recommended for surfaces that are expected to get lots of wear and tear, including kitchens, counters, bar table, table top, and so much more! Top Coat will protect your surface and extend the lifespan of your epoxy!

EASY TO APPLY – Applying our Top Coat is a breeze with the user-friendly Microfiber Paint Roller Kit, effortlessly covering your epoxy resin project with ease for a seamless finish that extends up to 50 square feet.

FAST RESULTS– Ultimate Top Coat has a 15 minute working time! Dries in 8-9 hours! Ready for use in only 24 hours! Perfect for use with epoxy resin supplies and Stone Coat Epoxy kits, including our Art Coat Epoxy and Countertop Epoxy kits!

Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications

Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber

Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks

Fills holes, castings, and molds

Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F

BONDS A VARIETY OF SUBSTRATES: For metals, ceramics, wood, glass, many composites and plastics

MULTIPLE APPLICATIONS: Can be used in joining, gluing, potting, panel and structural bonding in sporting goods, metalworking, general industrial, and transportation industries

LONG-LASTING BONDS: Has high shear strength to promote durability

FOR TOUGH APPLICATIONS: Offers high impact and fatigue resistance

OPPORTUNITY TO ADJUST AND REPOSITION: Allows up to 20 minutes of open working time

FULL CURE STRENGTH: Reaches a full cure in 24 hours at a temperature of 73 °F (23 °C)

CERTIFICATIONS: Is UL 94 HB Certified

PRODUCT OPTIONS: Available in bulk form or a Duo-Pak (DP) and black or off-white

DIGITAL DISPENSING ASSISTANT: Help reduce setup time using a free automation tool for time-pressure automated systems

For industrial/occupational use only. Not for consumer sale or use

CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-B Resin (126.6 fl oz), WEST SYSTEM 205-B Fast Hardener (27.5 fl oz), and one set of calibrated 300 Mini Pumps. 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature.

105 EPOXY RESIN is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 205 Fast Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. (205 Fast Hardener is not intended for clear coating.)

POT LIFE AT 72°F (22°C) is 9 to 12 minutes. Cures to a solid state in 6 to 8 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 40°F (4°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.

EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)

INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 205 Fast Hardener at the correct 5-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.