Lead2Amazon

Compact spiral saw with 4-pole motor delivers fast cuts

The product is manufactured in China

Red link Intelligence provides overload protection to defend against abusive situations

Outside Diameter Size: 16mm/0.62in(5/8-Inch), 18.5mm/0.73in(3/4-Inch), 20mm/0.78in(4/5-Inch), 25mm/0.98in(1 Inch), 30mm/1.18in(1-3/16 Inch). There are 5 size of hole saw kit to meet your professional needs.

High Quality Material: Made from strong HHS high-speed-steel for durability, high hardness, fast cutting, impact resistance, wear high temperature

Sharp gears and anti-cutting with lower consumption make the product a long service life

Can be used for thick steel plates, cast iron, stainless steel, non-standard angle iron and other metal open hole. Perfect for installing locks, knobs on doors and cabinets, or drilling large diameter holes through desks, etc

Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. Provide fast and precise cuts into stainless steel, sheet metal, cast iron, mild steel, aluminum, plastic,copper and brass

The product is easy to use

The product is durable

The product is manufactured in United States

ICE HARDENED for up to 50% longer life than the competition

Matrix II Bi-Metal Teeth for greater durability

Positive Rake Angle for fast cutting

Radiused Tooth Back reduces stress on teeth

Deeper Gullets for fast chip removal and Funtional Slot Geometry provides easy plug removal

SMALL DRILL BIT: Hole diameter: 3mm(1/8"),total length: 50mm(2").Package includes 15 pcs 3mm diamond hole saw drill.

HIGH QUALITY: Diamond ceramic hole saw are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion.

PORTABLE STORAGE CASE: These diamond ceramic hole saw with a tough box for easy and organized storage. Easy and convenient to carry. Improve work efficiently.

APPLICATION: Suitable for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, marble, light stone and fiberglass.

WARM TIPS: Start drill at 45 Degree to surface and align to 90 Degree as hole forms.Water is required to cool down the drill when using them which will greatly extend the life of the bit.

6-1/8 hole saw ideal for installing 6 recessed lighting, Arbor: 7/16" shank, fit 1/2" chuck

Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, sheetrock, cement board, plastic, PVC

Constructed with long-lasting tungsten carbide grit edge, 6-1/8 in. hole saw easy and fast cuts plaster stucco ceiling & wall. Cutting depth 1-1/2 inch

Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills

Not recommended for cutting metal sheet, brick, concrete block, cement tile

🌟【19 PCS ACCESSORIES】 HYCHIKA Hole saw kit Including 13pcs size saw blades: 19mm, 22mm, 28mm, 32mm, 38mm, 44mm, 51mm, 64mm, 76mm, 89mm, 102mm, 127mm, 152mm, max cutting depth of 25mm, 2pcs mandrels, 2pcs drill bits for easy replacement, 1pc installation plate, 1pc hex key.

🌟【HIGH QUALITY & FAST CUTTING】The hole saw drill bit cutter blades are carbon steel and heat treated, with black surface, ensure fast cutting, rustproof, wear-resistant and long usage life.

🌟【WIDE APPLICATIONS】 HYCHIKA Saw blades are durable and reliable to use on workpieces, suitable for cork board, thin PVC board, plastic. Not for hard metal, hard wood or density board. Not for use for cutting depths beyond 1"(25mm).

🌟【CONVENIENT STORAGE】Hole saw kit wood comes with a sturdy and small storage box, which is very convenient to store and easy to carry.

🌟【WHAT YOU GET】13 x HYCHIKA Hole Saw Blades, 2 x Mandrels, 2 x Drill Bits, 1 x Hex Key, 1 x Installation Plate, 1 x Storage Box, 1 x User Manual. HYCHIKA provides 12-months warranty, If you have any questions about our products, please feel free to contact us.

🌟【PERSONALIZED RECOMMENDATION】If you need to cut hardwood/metal, we are proud to recommend our HYCHIKA Bi-Metal Hole Saw Kit (B086SQWZK5). If you need more help, please feel free to contact us!

4-1/8 hole saw ideal for installing 4 recessed lighting, dryer vent hole and other roof vent

Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, sheetrock, cement board, plastic, PVC

Constructed with long-lasting tungsten carbide grit edge, 4-1/8 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch

Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck

Not recommended for cutting metal sheet, brick, concrete block, cement tile

Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter

The tempered steel body features marked graduations on the beam for fast measurement and application

#55 Heavy Duty Circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM

This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more; Shank is 1/2 inch round

All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill

2X more durable with 50% longer life than previous LENOX hole saws

Increased wall thickness improves durability and minimizes tooth loss

Optimized tooth design penetrates metal with ease

Larger, sharper teeth for faster cutting

SPEED SLOT staircase design for easy plug ejection

【Complete Kit】Our 6 Inch hole saw set includes essential accessories like 3/8" hex shank and SDS Plus arbors, an extra pilot drill bit(with debris removal spring), and two metal rings, ensuring you have everything for efficient cutting.

【Dust Containment】The primary advantage of a hole saw dust bowl is its ability to contain dust and debris generated during the cutting process

【Two Different Arbors】With both heavy duty 3/8" hex shank and SDS Plus arbors included, installation is quick and hassle-free, saving you time on setup

【Efficient Chip Removal】Featuring a center drill with spring, our 6 hole saw for recessed lights facilitates swift debris clearance, ensuring uninterrupted drilling for efficient results.

【Multi-Functional】With its HSS bi-metal construction, our 6in hole saw is suitable for cutting wood, drywall, and plaster, offering versatility for various projects.