Lead2Amazon

Material-The hole saw is made of BI-metal that is durable and tough.

Dimension-Cutting Dia: 8"/203mm; Shank Diameter : 10mm / 0.4";Cutting Depth : 25mm /1"

Application- This Hole Saw Drill Bit is designed for cutting solid board, compressed plate, plasterboard, plastic and etc. Good for home projects.

Sharp Teeth-The teeth is sharp and vibarition is less, which enable more stable operation and make the hole can be cut with quick speed and balance.

Spring Loaded Design-The spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole.

4-1/8 hole saw ideal for installing 4 recessed lighting, dryer vent hole and other roof vent

Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, sheetrock, cement board, plastic, PVC

Constructed with long-lasting tungsten carbide grit edge, 4-1/8 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch

Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: 7/16" shank, fit 1/2" chuck

Not recommended for cutting metal sheet, brick, concrete block, cement tile

High-Quality Material: The 83mm hole saw is made of M42 bimetal, with hardness up to 65HRC, with higher toughness, stronger wear resistance and higher performance cutting strength

Dimensions: Cutting Diameter: 83mm / 3.26"; Cutting Depth: 32mm / 1.3"; Shank Diameter: 10mm / 0.4"; Total Length of Shank: 97mm / 3.8"

Fast & Smooth Cutting: The sharp tooth edge design makes the cutting smooth and fast. More than that, the spring on the drill is very good because it automatically pushes the disc out of the saw after completing the hole

Wide Application: It is very suitable for corn hole drilling and other household projects, such as corn hole, bean bag board, speaker, duct, wood, gypsum board and thin metal

Worry-free Shopping: Customer satisfaction is one of our top priorities. If you have any questions about the product, we will provide you with a satisfactory solution as soon as possible.

2X more durable with 50% longer life than previous LENOX hole saws

Increased wall thickness improves durability and minimizes tooth loss

Optimized tooth design penetrates metal with ease

Larger, sharper teeth for faster cutting

SPEED SLOT staircase design for easy plug ejection

[Size Diamond Cone Tile Bit] --1pc 2 Inch (50mm) calidad tools tile cone, Top Angle 60 degree.46mm workable Depth, 5/8-11 Thread, Grit #80, total Length 55mm

[Size Diamond Finger Bit] --1"(25mm)Diameter, 50MM(2") workable length, 5/8-11 Thread Connection, Grit #45/50, toal Length 65MM(2.6")

[Wide Applications] --diamond cone tile bit is designed to trim,enlarge,shape,round bevel existing holes in tile,Porcelain, Granite and Marble.cone drill bit is very useful to improve the edge finishing of exposed holes,reduce the risk of cracking with standard and large format tiles subjected to tension (ex tightened plumbing, led lights etc),Bevel Ease chamfers and stress relieves rough holes in glass,ceramic and porcelain tiles.

[Save your money] --Using our tile cutting tools to expand existing holes to different sizes or shapes(0-50mm), no need to buy several core drill bits,which will save your money greatly!

[Machine] --Angle grinder 5/8-11 thread.This is not a diamond bits for drill. It doesn’t make holes but it bevels the hole cleaning and reinforcing the borders when the borders are chipped or need to be clean

Versatile and Efficient: Our hole saw drill bit is perfect for a wide range of materials, including drywall, wood, cornhole, plywood, plasterboard, ceiling, thin metal, plastic, PVC plasterboard and common building materials.

Durable and Long-Lasting: These hole saw drill bits are crafted with high-quality bi-metal to ensure exceptional durability and longevity. Designed to withstand heavy-duty drilling tasks, they feature a variable positive tooth configuration that enables fast and smooth cutting, reducing vibrations and providing a lasting sharp cutting edge.

Precise and Smooth Cutting: The advanced design of our hole saw drill bits ensures precise and smooth cutting, allowing you to achieve professional results every time. Say goodbye to jagged edges or rough cuts!

Convenient and User-Friendly: Our hole saw drill bit set includes an arbor and pilot bit, allowing for easy setup and quick start to drilling. With its intuitive design and hassle-free operation, this set ensures a seamless drilling experience for professionals and DIY enthusiasts alike. Compatible with both drill presses and handheld drills, it offers flexibility in usage.

PACKAGE CONTENTS: Includes 1 pc 6-7/64 in. hole saw, 1 pc arbor (with 2 drill bit), and 1 pc hex key. NOTE: Not recommended for use in hard wood, hard metal, and stone. If you are not completely satisfied with your purchase, we offer a 60-day free returns policy for your convenience.

Adjustable Hole Saw: This multi-diameter adjustable 1-3/16" to 12" woodworking drill can use a single tool to cut holes of different diameters, saving money and space.

Widely Used: Can be used to cut a variety of materials, such as plywood, laminate, composite materials, rubber, plastic, etc

Sturdy & Durable: Use carbon steel for long life. The valve body has a clear scale for fast measurement and precise cutting

Note: Make sure that all screws of the product are fixed before use, and first idlewild to test whether the blade is fixed to avoid injury caused by improper operation.

Package Includes: 1 x adjustable hole saw cutter, 1 x drill bit, 1 x hex wrench

2X more durable with 50% longer life than previous LENOX hole saws

Increased wall thickness improves durability and minimizes tooth loss

Optimized tooth design penetrates metal with ease

Larger, sharper teeth for faster cutting

SPEED SLOT staircase design for easy plug ejection

Note: Please be sure the product is used to drill with enough power to rotate the hole saw adequately and also verify whether the correct forward motion is engaged

Precise Dimensions: with a shank and tip diameter of about 3/16 inch, a total length of about 3.2 inch, and a cutting depth of about 1 inch, we ensure that our drywall router bits are the right tool for you and provide the ideal grip during use

Efficiency and Accuracy: the tip guide points ensure no damage to your socket box, and the downward design makes the drywall bit more stable when drilling, reducing offset and vibration; This improves the accuracy and quality of the drilling while maintaining an efficient, accurate, and stable milling operation

Quality Materials: made of M2 high speed steel, these drywall cutting tools are designed to withstand high pressures and loads, ensuring impressive reliability and sturdiness; They ensure that these heads will not easily break or deform even at high pressures, thus giving you a long service life suitable for this reliable tool that makes your tasks efficient

A Wide Range of Applications: these drywall drill bits are designed for versatility, capable of cutting a range of materials including drywall, outlets, windows, soundproofing bricks and more; Whether you're cutting around outlet boxes, frames, or canned lights, these tools have you covered

Ample Supply: the package includes 10 downward drywall bits to ensure an adequate supply for your projects and jobs; This underscores our commitment to providing reliable tools for your long-term use

Compatiable: Pilot drill bit for ASNOMY metal cutting TCT carbide hole Saw series(≥9/16" Inch / 14mm);

Top Quality: Made From top quality M2(6542) steel material and Titanium-plated, ensuring its long life on metal drilling;

Shank size: 15/64 inch(6mm), Whole Length: 2-11/16 inch(68mm);

5pcs Pack: Including 5 pcs Center drill bit, don’t worry about not having enough center drill bits, Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone.

Note: The pilot drill bit is made of M2(6542) steel，making this pilot drill is very hard and brittle. Please keep the drill straight and do not twist or swing sideways.