Lead2Amazon

Unique Design：The aluminum wire connectors are specially designed for 4 AWG, 6 AWG, 8 AWG, 10 AWG ,12 AWG, 14 AWG gauge wires, providing an efficient connection for a variety of wires

Mixed Material Wires Connection：Multi tap connectors allow copper wire to copper wire, aluminum wire to aluminum wire, and copper wire to aluminum wire connections, making the insulated connector the best alternative for safely splicing aluminum wire to copper wire

Reliable Quality：Copper aluminum wire connectors are insulated with high dielectric strength plastic sol for improved chemical protection and wear resistance

Product Advantages：Our black electrical cable connectors are easy to remove and re-insert cables, more convenient than butterfly nut connectors, with a larger wire diameter range and higher current, specially designed for those who need easy connection and use

Safety：The design purpose of in-line splice connector is to ensure the safety of aluminum to copper connections and to prevent electrical fires caused by overheating of aluminum wires due to conductor mixing

Micro-Pack 100W Sealed - Gauge Wire: 22-20 AWG

7.5 Amps continuous maximum current rating

High circuit density

Small overall dimensions

-40 C to 125 C temperature range

Connect any combination of solid, stranded, and flexible copper wires faster and more reliably

Minimize space consumption in the junction box by 40% compared to 222 Series

Visually inspect for proper strip length and complete wire insertion through its transparent housing

Operate comfortably and with lower operating forces by using familiar orange levers

280 Metri-Pack 280 Series Female terminals, (PACK OF 12)

280 Metri-Pack 280 Series Male terminals, (PACK OF 12)

280 Metri-Pack 280 Series Sealer terminals, (PACK OF 24)

Gauge Accept ( 10-12 GA), Cable Range Cable Range 3.00 - 3.00 mm2

Temperature Rating: -60F (-51C) to 257F (125C)

For telecom, datacom, automotive, small appliances and other applications - Repair broken wires or splice in additional wires to an existing voice, data, or low voltage circuit

For single conductor solid copper wire 19 - 26 AWG

Insulation on the wires does not have to be stripped before termination

Put wires in place and push button with pliers or crimping tool

Moisture resistant sealant protects wires from corrosion

High Quality - Made of flame retardant Nylon, this connector is durable, stable. With mineral oil-based sealant, it can keep the moisture away from the connection. And brass element construction with tin plated prevents corrosive.

Fit: Designed with 3 holes, holds 0.9-1.3 mm (22-14AWG) solid/stranded copper and common wires. Working Temp: -30 degrees C~+70 degrees C.

Insulation Design: 2000V DC voltage or AC 1400V voltage can be applied between the metal wire connecting the module and the insulating shell or cover.

Easy to Use: No peeling or twisting required, simply insert the wire into the pigtail electrical connector and squeeze the blue cap with a crimping tool.

Application: Widely used in electric dog fences, robotic lawn mowers, irrigation lines, automotive electronics, underground cable assembly etc.

HIGH PERFORMANCE: Seals and protects connections in moisture-prone environments where the highest seal level is required (up to IPx8)

MAXIMUM INSULATION DIAMETER: Works with conductors with a maximum insulation diameter of .160 inches

WIRE RANGE: Works with a gauge range between 22-16 AWG solid or stranded copper conductors

COMPLIANCE INFORMATION: For more compliance information, visit www.3m.com/regs

UL LISTED AND CSA CERTIFIED: UL 486C Listed and CSA 22.2 Certified

For industrial/occupational use only. Not for consumer sale or use

A high quality self stripping wire connector made for quick wire splicing between main wire and branches,where require high stability. User can simply INSERT wire and CLAMP cover to make connection within seconds,no need to strip, twist and tape the wire with help of IDC technology,and no electrical wiring skill is needed, it is so easy to learn and you can do it by a common clamp and scissors

Unlike common T tap connectors that only have 4 contact points,to lower resistance and impedance,Nicelux T-1AC provide 8 optimized contact points to cable core，for more stable electron passing,in addition to high precision copper pin, it produce lower heat and ripple while carrying big current.The flame retardant housing add one more layer of protection in case over heat

Widely compatible with various wire type, such as solid wire,multiple stranded wire and flexible wire,the applicable wire jacket includes PVC,Teflon,Silicon and Rubber material. Main wire groove supports 18~16 AWG,Brach wire groove supports 20~18AWG

Max DC/AC 300V 15A(conductor capacity), mostly used in wiring project of home improvement,lighting,security camera,automotive electrics,appliance,equipment and wherever T tap connection is required

Pierce wire jacket in plastic housing to contact cable cores that are never exposed during operation,which is safe to user.Making wiring connection cleaner and more orgonized by avoiding hideous and time wasting electrical tape jobs, the wiring circuit is easier to understand for future system maintenance. The heavy duty housing makes connector lock cable firm and hard to open, but still be possible for reusable purpose

MX150 Sealed ,Female Connector 22 AMPS

Gauge Wire: 18 22 AWG

Dielectric Withstanding Voltage: 2200V AC min, Voltage: 600V

Environmentally sealed to IP67 Integrated mat wire seal Integrated interface seal

The temperature range from -40¡C to 125¡C,

3-Pin Connector Set for Strobe Bulbs and Power Supply installations.

3-PACK 3-Pin ( 18-24 AWG wires ) 250/VAC,VDC, 15Amps

Centerline (Pitch)_: 5.08_mm__(0.2_in), UL Flammability Rating_: UL 94V-2

Compatible with most Whelen, Sho-Me, Federal Signal, Code 3, Code 3, Nova, Star Signal, Sound Off, Tomar, SVP, and Able 2 power supplies

Temperature Rating: -60F (-51C) to 257F (125C)