Lead2Amazon

✔ CUSTOM RELOADER: This is NOT a universal loader. We offer over 200 different magazine compatibilities. Please verify CALIBER and MAGAZINE compatibility in the dropdown menu. Each speed loader is designed to provide marksmen with the best comfort and utility for their guns.

✔ PROTECT YOUR FINGERS: MakerShot speed loaders allow you to drop rounds into each magazine without having to manually press each round with your thumbs. Easy load assist will prevent sore fingers at the range. Great speed, ergonomics, and durability decreases load time so you can get back to firing.

✔ HANDLES SMOOTHLY: Perfectly fits onto each selected magazine for ideal loading of every round. Made of high-quality polymer for fast and easy reloading that will last a lifetime. Compact design fits in your pocket to carry anywhere.

✔ QUICK & EASY LOADING: Solid, compact design has no springs for increased durability and efficiency. The 360 degree rim allows for one handed or table assisted reloading. Quickly and easily attaches to each magazine for fast and painless loading.

✔ BEST GUN PARTS & ACCESSORIES: MakerShot magazine speedloaders are American made with a high-quality polymer. Our products are simple, useful, and tested for shooters and survivalists looking for economical solutions at the range and beyond.

Aecktech Universal Magazine Loader fits Double Stack 9mm & .40 S&W,Sig P365, P226,Beretta 8040,Taurus G3,CZ 75,Shadow,Springfield Hellcat,Keltec 9mm & 40 etc.

High-quality polymer speed loader from,Great speed, ergonomics and lifetime durability.

Save time and money at the range along with your hands and finger pain when loading your magazines.

Unique Design:There is an Anti-slip texture on both sides of the magazine speed loader, which increase speed and save your thumb and helps you enjoy the shooting experience.

【Large Capacity & Fast Loading Design】The loading block case can store 40 rounds of revolver .38 Spl or .357 Mag cartridges (5 Shot). Don't need to worry about slow loading,minimizes loading time. Equip with Ludex LR1 loader and dust protection cover,it is beneficial for people who have a lot of shooting needs.

【Applicable Caliber/Model】The LR1 loader can load 5 rounds. Cartridge case and loader suitable caliber: .38 Spl/.357 Mag. Applicable models: S&W 36,37,38,40,42,49,60,340,360/Charter Arms/Taurus 85, 651, 851/Rossi 68/Ruger SP101. If the cylinder dimensions are the same as a listed revolver, then they might use the same speed loader.

【Applicable to Different Scenes】Can be put it into backpack or handbag and carry to anywhere for shooting activities. If the grip a little bit over-sized, cause a situation that the loader cannot be pressed easily, you need to do is align the bullet with the cylinder port, then press the button; the bullets will fall into the cylinder.

【Sturdy PP Materials】 Loading block case made of environmentally-friendly materials with longer service life, safe,harmless,heat and wear resistance. Matte surface is more non-slip and dirt-resistant.

【Guarantee Service】 You will get 1* Loading Block Case, 1*Loader, 1*Manual, 1* Protective Cover. We offer 1-year warranty and high -quality customer service. If you have any questions or suggestions about Ludex speed loader, please feel free to contact us.

★★★MADE IN THE USA★★★

★NOTE: On new magazines, light pressure to the front of the previously loaded round may be required. This prevents the magazine plunger from binding. This seems to specifically happen to the thrid round of new 365 magazines!

★ONLY WORKS WITH: ‎Sig Sauer P365, P365 X, P365 XL, P365 SAS, P226 - Not guaranteed to work with other magazines!

★ 3D PRINTED: This loader is 3D printed for a precision fit with the listed compatible magazines. Rapid Loaders are 3D printed allowing fine tuning of critical dimensions. This ensures a perfect fit on each specific magazine for optimal loading of every round.

★BUILT TO LAST: Through extensive testing of our product and process, we are able to offer an excessivly stong and durable 3D printed speed loader. Durability and strength far exceeds normal use conditions. High-quality plastics ensure product longevity.

★ FINGER PROTECTION: Speed loaders allow you to load rounds into each magazine without having to manually press the round with your thumb. Easy loading prevents sore fingers.

★ RAPID LOADING: The lowered 360 degree rim allows for one handed or table assisted reloading without your fingers interfering with the rounds. This increases loading speed and ease.

J-PAK is an ambidextrous 3-2 speedloader that can be configured for left-hand or right-hand use

Insert 5 rounds into the six sockets to configure J-PAK to load 3 then 2 rounds with either left or right hand

The unused socket provides a finger gap for positive orientation and better control of the speedloader and allows for LH / RH configuration

Nest two J-PAKs together to carry 10 rounds in a very small package - slightly larger than only one J-PAK

Great for EDC/concealed carry. The J-PAK fits nearly flat in pockets of shirts, pants, vests, and jackets

Left-hand Use: Load three rounds on the side marked “L” and two rounds on the opposite side

Right-hand Use: Load three rounds on the side marked “R” and two rounds on the opposite side

Made from tough BPA, BPS, BPF free polyurethane material for use in both hot and cold environments

Do you have a 6-shot K-frame revolver? Search for Zeta6 K-PAK2 instead

Wide Compatibility: Our magazine speed reloader is not only fitted for the P17 magazine but also fits 22LR and QLK22 models, expanding its utility across multiple models for enhanced versatility.

Durability Meets Function: Unlike other bullet reloaders using flimsy plastic, ours are crafted from robust materials, this gun magazine loaders withstand the rigors of frequent use, offering lasting reliability and performance.

Effortless Reloading: Designed to simplify the magazine loading process. This speed loader makes it quick and efficient—ideal for those looking to spend more time practicing and less time reloading.

Thumb Saver: Say goodbye to sore thumbs after practice sessions. This user-friendly mag loader makes loading effortless, so you can focus on honing your skills at the range.

SplashNColor's Commitment: Committed to excellence, we bring you this high-quality, sought-after mag speed loader, embodying our dedication to offering hard-to-find, superior products.

Compact Design: This mini speed loader is designed to be pocket-sized, making it easy to carry with you

Ergonomic Grip: The ergonomic design of this loader makes it comfortable to hold and easy to use, reducing strain on your thumbs

Versatile Compatibility: This loader is compatible with a variety of pistol models, including Ruger Mark I, II, III, IV and 22/45, Browning Buck Mark and Smith & Wesson Victory 22LR

High-Quality Material: Made in the USA with durable 3D printed polymer plastic, this loader is built to last

Includes McFadden Lightin Grip Magazine Loader and #2 Adapter for Rifle 15/22

15/.22, CMMG old and new style, CMMG Bravo, Sig Sauer 522, Kel-Tec PLR22 &SU-22, Black Dog, Bushmaster .22 Carbon 15, Stag Arms 22 & Kriss Defiance DMK22 22lr, Fostech .22, 2A Armament magazine, Rock River Arms LAR 22 Adapter Only

Does NOT work with CMMG MK4

Adapter INSTRUCTIONS for Rilfe 15/.22, Prior to Spring 2022 CMMG, Sig Sauer 522, Kel-Tec PLR22, Black Dog Magazines, Bushmaster .22 Carbon 15 (Rifle 15 Style), Stag Arms 22, & Kriss Defiance DMK22 22lr., Fostech .22, 2A Armament, Rock River Arms LAR 22.

Some 22LR cartridges are real sticky with wax lube. After filling the reservoir, give

★★★3D PRINTED IN THE USA★★★

★ IMPROVED design - Better then OEM: The added V on the loading nub helps align the loader with the round and prevents the loader from slipping. This improves ease of use and increases loading speed!

★ COMPATIBILITTY: Slight alignment by hand is required. ONLY works with the following glock magazines: G17, G19, G22, G23, G25, G26, G27, G28, G31, G32, G33, G34, G35, G37, G38 & G39

★BUILT TO LAST: Through extensive testing of our product and process, we are able to offer an excessivly stong and durable 3D printed speed loader. Durability and strength far exceeds normal use conditions. High-quality plastics ensure product longevity.

★ FINGER PROTECTION: Speed loaders allow you to load rounds into each magazine without having to manually press the round with your thumb. Easy loading prevents sore fingers.

★ IMPORTANT NOTE: This model is "NOT" for use with Glock .45 Auto, G42 Single Stack .380 Auto or 10mm Magazines