Lead2Amazon

Plastic storage box

Hoppe's No. 9 cleaning kit with aluminum rod

Includes one 2 ounce bottle cleaning solvent and one 2.25 ounce lubricating oil

Brush for the intended caliber is included with this kit

Intended for .38, .357 and 9 millimeter pistols

Packaged in a box, not clamshell

NitroAir is the first pre-filled cartridge loaded with compressed nitrogen gas for use with N2-designated airguns. Umarex's NitroAir is the most revolutionary, innovative, and convenient solution for high pressure airguns.

Compressed to 3,600 psi this two-pack has 32 grams of nitrogen (N2) in each cartridge and works seamlessly with the Umarex Komplete NCR, the very first N2 cartridge PCP air rifle. These revolutionary nitrogen cartridges should only be used with airguns that are designated by a N2 symbol indicating the airgun is for use with the pre-filled, disposable nitrogen cartridge.

NitroAir cartridges are not for use with CO2 airguns. CO2 powered airguns are designed for a much lower operating pressure. To prevent the use of Umarex NitroAir cartridges in a CO2 powered airgun the patent-pending piercing surface is inset to prevent such use.

When installing, screw the cartridge into the N2 designated airgun. Once it is pierced it may become difficult to turn the cartridge but go ahead and turn it a half turn further, if possible, to ensure a good seal.

Unlike CO2 powered rifles, there's no need to remove the NitroAir cartridge from the rifle for storage. Just make sure to keep your airgun unloaded and locked up to prevent unauthorized use. When it is time to replace a cartridge be sure to use the air bleeding mechanism on the airgun to drain all the air before attempting to remove it.

Efficient Design: This pcp air pump with sleek stainless steel construction smooth upward and downward motion. 8 mm copper female quick connector allows to withstand over 10,000 times of tear and wear, giving it an extended life

HPA Pump with Safety: The pcp hand pump provide high pressure air up to 4500 psi or 40 MPA. While the flexible micro-bore hose provides best performance, can bear up to 80 MPA, safeguarding your safety with superior quality

Wide Application: The PCP pump designed for most PCP pre-charged pneumatic airgun. Also great for car tire, motor tire, bicycle, kayak, soccer

Attention: Air tightness test must be done before use PCP Hand Pump. Ensure that the 4 connection ports are not leaking. Manually pump up a few times and keep the posture. If air pressure do not drop, the test is complete. Otherwise, please check the connection ports again

Pressure Relief: The air pressure must be vented. When not in use, try to keep the PCP pump in the pressure-free state. Hose can’t bend over, don’t crash pressure gauge

Package: 2x Quick Disconnect Plug

Mede by Stainless Steel Never Rust.

Rated to 6000PSI.

8mm Quick Disconnect Adaptor Double Male Fill Nipple

Air Both End Male Quick Disconnect Adaptor Stainless Steel Double Male Fill Nipple Accessories

Material: Stainless Steel, Type: Double male fill nipple, ​Rated to 4000 PSI, Max Pressure: 5000 PSI

Size: 8 X 8mm, 8mm male to male connector, quick disconnect adapter

Easy to operate: High pressure resistance and no leakage, simply connect each fill adaptor to the female painbtball tool fitting

Application: Suitable for 8MM female convertor, for Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA tanks filling etc

Package includes: 2PCS Double male stainless steel quick disconnect plug adapters

4 Stage PCP High Pressure Hand Pump: Our 4 Stage PCP Hand Pump is a updated version than 3 stage Hand Pump, which can easily reach up to 4500 PSI pressures. The PCP Pump Compresses can save approximately 30% less effort than traditional pumps. Pumping once delivers a larger air volume.

Durable & Sturdy : The hand air pump is made of high-quality stainless steel, which has excellent fading-proof and rust-proof performance. Ergonomic handle are comfortable grip, requires less effort.

Built-in Oil Moisture Filter: The high pressure hand pump is built in moisture filter, reducing moisture and oil can decrease corrosion and wear on the internal components of the pump, thereby extending its lifespan. Also it maintains the cleanliness of the gas and prevents water from entering into inflated objects (e.g. tires, air mattresses, etc.), ensuring the quality of the gas and improving the efficiency of inflation.

Usage Attention: Air tightness test must be done before use PCP Hand Pump. Ensure that the 4 connection ports are not leaking. Manually pump up a few times and keep the posture. If air pressure do not drop, the test is complete. Otherwise, please check the connection ports again.

Meet All Your Inflation Needs: The PCP Air Compressor is ideal for a wide range of applications, including inflating pcp airsoft guns, paintball guns, hpa tanks, scuba diving tanks, and a variety of bicycle tires.

4-Stage High-Pressure Pump: Our 4-stage PCP hand pump for air gun is a powerhouse that can easily reach up to 4500 PSI pressures. With each smooth stroke, this PCP pump compresses the maximum amount of air, allowing you to save approximately 30% of your energy compared to traditional manual pumps. Get the job done efficiently with less effort.

Built-in Oil Moisture Filter: Our PCP air gun pump comes equipped with a built-in oil-water filter that effectively filters moisture and over 90% of water content. It ensures that your PCP rifle is filled with dry, clean, high-pressure air and allows you to easily fill your scuba diving tank without introducing moisture. Say goodbye to damp air and enjoy the benefits of a dry and reliable air source.

Durability and Stability in One: Our PCP air rifle pump is crafted with an integrated aluminum alloy pump tube that is lightweight and resists rust. The thickened exterior ensures high reliability and long-lasting vibrant color. The comfortable rubber handle provides a secure grip, while the foldable enhances stability, making storage and transportation a breeze. Invest in quality and enjoy the durability and convenience our pump offers.

Clear Reading, Precise Measurement: Our high pressure hand pump boasts an accurate pressure gauge that ensures you always have the exact pressure at your fingertips, avoiding overfilling and creating a more secure working environment. A 0-6000 PSI measurement range and night vision functionality ensure you can read pressure levels even in dimly lit environments. Our gauge offers two measurement units catering to your reading habits.

Meet All Your Inflation Needs: Designed with PCP airguns in mind, our PCP hand pump ensures that your air rifle is always ready for action. Our PCP air pump can handle car tires, motorcycle tires, bicycle tires, kayaks, and soccer balls with ease. It makes maintaining proper tire pressure a breeze. Choose our versatile PCP hand pump and enjoy the convenience of a single pump for all your inflation needs.

Improves accuracy while also dampening barrel whip

Consistently control muzzle movement during lock-up time for greater accuracy

Made from LimbSaver's proprietary NAVCOM material to dampen vibration

Tunes the vibration waves that affect shot grouping

Standard size fits barrels with 1/2- to 7/8-inch diameters

STREAMLINES CO2 HANDLING: The SplashNColor Universal Punch Button Cylinder Opener for Umarex T4E HDR/TR50, TR68, and TS68 makes handling CO2 cylinders effortless. Designed to eliminate the need for an Allen key, it allows quick, smooth, and hassle-free operation.

VERSATILE UNIVERSAL FIT: This cylinder opener is precision-crafted to fit Umarex T4E HDR/TR50, HDR/TR68, and TS68 models. The 3D-printed design ensures a snug and secure fit, making it a versatile and essential addition to your gun accessories collection.

EFFICIENT DESIGN: Equipped with ergonomic side notches for better grip, this tool makes tightening and loosening CO2 cylinders fast and easy. The large strike surface ensures efficient cylinder piercing, improving your shooting performance and preparation time.

DURABLE 3D-Printed ABS: Made from impact-resistant ABS plastic, this opener is engineered for durability and reliability. The UV-resistant and heat-resistant materials ensure long-lasting performance, even under demanding conditions and frequent use.

OUR BRAND: SplashNColor is dedicated to delivering innovative and reliable gun accessories. With a focus on durability and user-friendly designs, our products enhance your experience, helping you maintain and optimize your Umarex T4E airgun system.