Lead2Amazon

Convenient Fender Clips: Pontoon bumper clips are designed to protect your boat by easily and quickly repositioning the fenders when docking. You won't have to tie and untie fender ropes as often. Simply use the fender hooks for quick removal and installation.

Easy To Use: The Marine Fender Hook fits mooring ropes up to 3/8", a common size used by most pontoon boat owners, and makes it easy to adjust the height of the fender. The rope is threaded through the hole in the pontoon bumper clip, then tied with a knot at the end to prevent accidental slipping and loss of the fender.

Superior Quality: The boat bumper clips are made of ABS plastic, won't rust, can better adapt to the complex climate environment at sea, more durable. The surface is smooth and won't scratch your boat railings and fender bumpers.

Package Content: Includes 4pcs gray boat fender hooks. With the help of pontoon boat railing fender hooks, you can dock at different docks or have a relaxing time at a lake party.

Warm Note: These pontoon boat fender hooks attach securely to 1" and 1.25" square rails and slide. The diameter of the cable should not exceed 3/8 inch. Please note these two points before purchasing to ensure they will fit your boat and rope.

Premium Dock Corner Protector: Corner dock bumper fender combines inflatable fender and permanent dock bumper for ultimate dock corner protection. Install the dock bumper on the corner of the dock to protect both dock and boat from damage caused by collisions.

Reliable Marine-Grade Corner Dock Bumper: Constructed from marine-grade rotomolded vinyl with sturdy ribs, fearturing soft, tough, UV-resistant, impact-resistant and anti-tear to ensuring long-lasting protection against impacts. The included mounting hardware are made of 304 stainless steel for rust-proof and long-lasting.

Hassle-Free Mounting: Corner Dock bumper comes with 304 stainless steel screws and washers. Provide the convenience and security of permanently mounting marine corner dock fender bumper. No need to adjust fenders each time when docking.

Special Design: Sturdy ribs of the marine corner dock bumper fender is durable enough to against impact. The round shape helps guide the boat down into the slip and reduce the rubbing.

Boat Dock Bumpers Sizes: The size of the dock corner fenders is 15" x 6" x 4.5" and aim to provide complete coverage for dock corner.

【 PACKAGE】 Package Includes 2pcs 23in*6.5in Inch Boat Fender, Black Boat Fender Rope*2, Air Pump*1 And Needle*2, Packing Box*1.

【Superior Quality】MoonQuake Classic Series Marine Bumper, Superior Quality! Rock-solid rope of reinforced material for easier fixation

【Easy to Inflate】MoonQuake is a one piece manufacture (no parts join together to form the final fender) with a consistent wall thickness. Simple valve for easy inflation

【Adapt to all kinds of harsh docking conditions】MoonQuake multifunctional fenders, suitable for the harshest conditions. Suitable for any use and any type of boat from 10-50 feet and UV resistant

【How many fenders should be on the boat】For boats with a length of no more than 10 meters, two fenders on each side are recommended, and on boats over 10 meters, 3-4 fenders on each side will serve you.

STRONG PROTECTION: Our boat bumper covers are designed to provide your boat fenders with strong protection that extends their lifespan and safeguards your hull's finish against unsightly scratches and marks. In addition to their durable design, our boat bumper covers are crafted to give your vessel a sleek, timeless look that's sure to impress.

SIZE, PACK & COLOR OPTIONS: To give you the flexibility you need, we offer our marine fender covers in multiple size, pack, and color options. You can choose from 1, 2, or 4-packs, each with 5 different size options (6″ x 18″, 8″ x 22″, 9″ x 26″, 10″ x 26″ & 12″ x 34″) and two classic colors (navy blue or black) to perfectly match your boat's style.

PREMIUM MATERIAL: We use only high-quality polyester (fully drawn yarn) to create our marine fender covers. This material is highly elastic, UV-protected, and resistant to both water and abrasion, making it ideal for use in marine environments. Plus, its superior tensile strength ensures that our boat fender covers can withstand the wear and tear of the open water.

CUSTOM FIT: Our boat fender covers are designed to fit most cylindrical fender and bumper types. You can rest easy knowing that our boat fender covers will provide a snug and secure fit for your boat fenders, helping to prevent slipping and providing added protection against impacts. Our boat fender covers are easy to install and remove, making them a hassle-free addition to your boating gear.

SIZE CHART: For accurate sizing, refer to our size chart which provides dimensions for our 5 size options. The provided sizes represent the fabric's unstretched dimensions. Be aware that when stretched over a boat fender, the fabric's elasticity allows it to surpass the indicated unstretched sizes. Our boat fender covers are designed to fit popular fender types such as Taylor Made's Big B, Super Gard, Hull-Gard, and Polyform HTM, F, and G series, ensuring a proper fit.

Lightweight, UV resistant polymeric is easy on hulls

Double molded eye ends allow for a variety of tying options

Seamless one piece construction - comes in white

Consumer will receive one oval boat fender upon purchase

Limited lifetime warranty

Convenient Fender Clips: Yboatch pontoon bumper clips are designed for the easy and quick reposition of fenders to protect your boat when docking. You do not have to constantly lash and unfasten the fender ropes. Just use the fender hangers for quick release and installation.

Application Scenario: This pontoon fender clips can be securely fixed on 1 inch and 1.25 inch square rails and ensure easy slide. The rope should be no more than 3/8 inch in diameter. Please pay attention to these two points before purchasing to avoid mismatch with your boat or rope.

Easy to Use: Pass the fender rope through the hole of the boat bumper adjuster and tie a knot at the end so that the fenders can be firmly tied to the adjuster and will not fall easily. Then clamp the clips on the square railings. You can slide the clips along the railing smoothly.

Premium Quality: The boat bumper clips are made of ABS plastic, light-weight but has higher strength and will not rust like metal clips. They can better adapt to the complex climate environment at sea and are more durable. The surface is smooth and will not scratch your boat railings and fender bumpers.

Package Content: The set contains 4 grey boat fender hangers. These clips are small in size but they have played a great role and are a good helper for your navigation.

Durable and Reliable: COOLWAVE inflatable boat fender is made of reinforced PVC fabric, resistance to wear and tear. It provides reliable protection for your watercraft, preventing scratches when docking against hard objects or other boats.

Wide Application: Dock bumpers can be easily attached horizontally or vertically, providing flexible and secure installation options. They can be used on boats up to 27ft long, such as PWC, kayaks, fishing boats, and trawler boats.

Easy to Install: Use a pump to connect the inflation valve for quick inflation and deflation (pump not included). COOLWAVE boat bumper can be easily installed through the D-rings.

Convenient Storage: The included storage bag makes it easy to store and carry the inflatable boat Bumper. You can conveniently pack it away when not in use.

What You Get: COOLWAVE 10'x18" Inflatable Boat Fender, 2 lines, carry bag, repair kit, user manual.

[High-Quality Material] Caminor boat fenders are made of high-performance EVA foam, designed for durability under intense UV and marine conditions. The back features multiple reinforcement ribs, providing ample support when compressed from the front. It absorbs and disperses collision forces with ease, delivering unparalleled cushioning for your boat.

[Unique Low-Hanging Points Design] Caminor's hanging angle aligns of the suspension follows the contours of the hull, bumpers feature suspension points positioned lower than traditional boat bumpers. Ensuring that the boat fenders fit perfectly around the dock. This design helps prevent scuffing and damage around the boat, providing optimal protection for the boat.

[Easy Installation& Use]Our boat bumpers come with integrated auto-locking buckle and 1/3 in thick Heavy duty elastic cord, ensuring easy and reliable installation. No need for complicated knots; you can easily secure the boat fenders to boats, docks, pilings, and other locations

[Size Selection] Caminor boat fender for docking measures: 16.93" (length) * 8.78" (width) * 4.33"(thickness). For optimal protection, we recommend using one boat fender for every 10 ft of boat length. For boats under 30 ft in length, we suggest deploying no fewer than three boat fenders.

[Applicability & After-Sales Service]Caminor boat fenders will be a good fit for most types of boats, including bass boats, pontoon boats, fishing boats, jet ski boat, jon boats, PWC boats, and more. boat bumpers fenders ensure reliable protection throughout the docking, berthing, and mooring processes. Should you encounter any issues while using our products, please contact us promptly so we can promptly resolve them.

For Different Vessels: Our boat fenders are designed to fit boats of different sizes. For boats up to 16ft, choose the 5.5-inch width. For those measuring 16-26ft, the 6.5-inch option is ideal, while the 8.5-inch fender best serves 26-36ft boats. The boat bumper provides optimal protection, whether for vessels or docks and also serves as an effective marine warning buoy.

Built to Last: Crafted from high-grade PVC, our boat fenders for docking boast a 3.8 mm wall thickness to prevent air leakage and withstand strong impacts. The boat buoy bumpers also resist UV light and minimize the risk of cracking or aging, even after prolonged exposure.

Quick and Easy Inflation: With an air pump and needles included, these boat bumpers for docking 4 packs have been thoroughly tested for quality assurance and enable rapid inflation. The pump's compact design, measuring only 11 inches, makes it portable and convenient for on-the-go inflation.

Versatile or Horizontal Options: Thanks to the double-hole design at both fenders' ends and 4 pieces of sturdy 5.9 ft polypropylene rope, these boat fenders can be hung vertically or horizontally. These ropes resist twisting, rotating, or knotting, ensuring long-lasting and wear-resistant use.

All-Inclusive Accessories: Your purchase includes all necessary tools for immediate use: a pump, 4 x air needles, 4 x 5.9 ft polypropylene ropes, and a storage bag. The storage bag, crafted from durable Oxford cloth and breathable mesh, allows for easy storage and transport, keeping your boat bumpers protected and ready for use.

Marine Pontoon Docking Accessories: you will get 12 pieces of rail fender hangers in total, simple in structure and sophisticated in craftsmanship; The sufficient quantity can suffice your needs for boat use or timely replacement

Detailed Information: the boat bumpers clips are designed to clamp securely to 1'' and 1.25'' square tube rails, and fits most pontoon boat square bumpers; They can be quickly positioned again, which solves the problem of constantly tying and untying fenders

Promote Efficiency: our boat fender holders help you easily and quickly adjust the fender position to suit different docking conditions, eliminating the hassle of constantly tying and untying the fender line from your track

Reliable Material: this pontoon rail fender hanger is made of quality ABS plastic material, strong and durable, smooth surface, will not scratch your boat tracks, and do not worry about scratching your sofa in the pontoon boat

Easy to Use: the pontoon boat fender hangers are suitable for lines up to 3/8 inch, fender height can be easily adjusted; Tie a knot at the end of the rope after it passes through the hole to avoid the fender from slipping accidentally