Lead2Amazon

This bilge pump discharge tubing is made of lightweight and flexible premium virgin PVC, which is durable and rigid, provide utmost oil, solvent, chemical and sunlight resistance.

Corrugated helix, kink-proof construction with an excellently tight bend radius ensures maximum durability and maintains a steady flow.

Only use for 3/4-Inch OD (Outer Diameter) pump outlet, Please verify your bilge pump outlet size before purchase.

Package include a 3/4-inch Thru Hull Fitting and 2 stainless steel clamps with screw head make it easier to fix the hose without any tools.

6.5 ft(2m) high quality material upgrade hose.

Package included 1 pack of 1100 gph Automatic bilge pumps for boats, 1 pack of 6 ft/1.8 meters bilge pump hose, 2 stainless steel hose clamps, and 1 thru hull connector.

The bilge pump hose is made of high-quality PVC material, which is light and durable. And it is resistant to oils, solvents and chemicals.

Corrugated helix, kink-proof construction with an excellently tight bend radius ensures maximum durability and maintains a steady flow.

The bilge pump kit is easy to use, suitable for 1-1/8" OD pump outlet, simple to install and remove the filter device, to ensure that the pump runs freely without vibration, and will not burn out the pump if it runs without water for a short time, and suction lift does not need to be fully submerged, thus providing you with a convenient using experience.

Widely Applicable: the plastic hose clamp and pump enjoys a wide range of applications, such as small swimming pools, cistern replenishment, sewage sampling, liquid transfer, fountains and more, fit various industries including fish farming, environmental protection, ships, industry and agriculture, etc

Voltage：12V Flow Rate: 800 GPH Outlet Dia：3/4" (19mm) 1-1/8" (29mm) 4-Year Warranty

Revolutionary Split Quick-Connect Joint: Effortless pump replacement in seconds! Experience unparalleled ease as there's no requirement to disconnect the base or plumbing. Simply swap out the motor for swift and hassle-free pump changes, catering to the convenience of all users.

Electronic Automatic Mode: SEAFLO's latest automatic bilge pumps eliminate the need for an extra float switchThe pump activates automatically every 2.5 minutes, halting operation if the current falls below 1.25A or exceeds 8A. It resumes operation 2.5 minutes after stopping. Additionally, when the pump identifies a current surpassing 1.25A at the water level, it resumes normal operation to efficiently pump water away

Backup Functionality" Avoids Persistent Operation: Backup feature designed to prevent continuous running in case the sensor becomes obstructed by debris. The pump switches to a 2.5-minute cycle mode. It checks for water every 2.5 minutes, operating for just half a second each time, consuming only 0.25 AMP per day.

Enhanced Features: Anti-Airlock protection and exclusive moisture-tight seals ensure reliable performance. Marine-grade blocked wiring guarantees durability in marine environments. Larger impeller design and a robust motor contribute to superior performance, outperforming competitors.

Hidden Air Vents: Prevents Airlock

Complete Package for Your Needs: this handy kit comes with 1 automatic boat bilge pump, a 3 way bilge pump switch panel, and 1 complete bilge pump installation kit (1 piece 5.9 ft/ 1.8 m black hose, 2 hose clamps, 1 through hull fitting set (about 1-1/8 inches) providing the things you need in a kit; It is a good combination designed to conveniently discharge water, supplying an impressive flow rate of about 1100GPH at a voltage of 12V

Practical Bilge Pump: 12v bilge pump flow rate is 1100GPH, voltage is 12V, current is 3.8A, wire is 1m, outlet diameter is about 29 mm/ 1.14 inches (1-1/8 inches), width is about 81 mm; 3 ways switch, automatic, off, manual, voltage is 12v and 24v, size is 2.96 x 2.5 inches/ 7.52 x 6.35 cm

Clear LED Indicators: these bilge pumps for boats feature LED indicators for a quick and easy glance at the current status of your pump, even in the dark; The manual mode lights up a red indicator and the automatic mode activates a green light, providing a clear, visual guide to ensure safe and efficient operation

Built in Circuit Breaker: the embedded 15A circuit breaker in the bilge pump switch panel assures safe operation of the electrical circuit; During a short circuit, you can easily restore the circuit by pressing the breaker button; This feature also keeps your bilge pump from intermittent high currents, preventing engine burnouts

Versatile Applicability: whether you own a fishing boat, a cruiser, or a yacht, this combined automatic bilge pump and 3 way bilge pump switch panel is your ideal choice for assured safety at sea; Moreover, it can also be applied to aquariums, small swimming pools, fountains, and other places that require water drainage

Package Length: 4.06cm

Package Width: 4.06cm

Package Height: 13.72cm

Country of origin: United States

Package Contents: you will get 1 piece of 12V 800gph live well aerator pump for boat, and 4 pieces of 3/4 inch stainless steel mesh strainers, a thoughtful combination to meet your use and replacement needs

Efficient and Convenient: the cartridge of the live bait aerator is easy to remove, so you can clean and replace it; Internal airlock fins ensure even water flow to smaller live wells for more confined spaces, which can save you the hassle of manually pumping water or changing filters

Safe and Submersible: the livewell pump is fully submersible and is secured with tinned 18-gauge wire; The length of the 90-degree threaded air inlet is 125 mm, including 2 different outlet hose tail configurations, straight and 90 degrees

Sturdy and Rustproof: the aerator pump's casing is made from sturdy plastic, compact, reliable and rustproof, with high efficiency, low current consumption, which can provide high capacity output water cooling long life; Stainless steel shaft allows the pump to be applied in fresh or salt water

Waterproof and Damp Proof: the livewell aerator has ignition protection, whether high current, or damp seal, will not affect the normal use of aeration pump, convenient to use, serving you for a long time

【Perfect Design】This product is made with bodies crafted from ABS exclusive moisture tight seal. The pure copper motor boasts excellent electrical conductivity, minimal resistance, low energy consumption, high performance, solid stability, reduced noise, and an extended service life.

【Small yet Powerful】1/10HP sump pump moves up to 1500 gallons per hour tackles any draining job at a fraction of the time. Small size, high efficiency, low current (12V/3.5A); to achieve a small size perfect combination of high flow.

【Built-in Float Switch】Automatic mode: Start/stop automatically. When water level is below 1 inch, it will automatically disconnect the power; when water level rises above 1.4 inch, the pump will start again. Manual mode: The pump will not stop automatically once started, need to manually cut off the power supply.

【Auto/Manual Mode Connection】Automatic mode connection: Contect black wire to negative, contect blue wire to positive, red wire is not connected. Manual mode connection: contect black wire to negative, contect ren wire to positive, blue wire is not connected.

【Easy to Use】The pump outlet Diameter is 1-1/8" (29mm), 1pcs of stainless steel clamp is included, which makes easier to connect discharge hose. Ideal for fishing boats, cruisers, runabouts, yachts, skiff, dingy, fish tank, RV, as a portable shower, etc.

【Customer First】 One-year warranty. For any question, please don't hesitate to write to us through our storefront and click "ask a question", or support email to us, we will respond within 24 hours.

Comprehensive Package: package comes with 1 piece of 12 volt 750GPH bilge pump with 1 piece of bilge pump float switch DC 12V 24V 32V, ensuring you have most you need at hand; This comprehensive package provides a solution for your boat's bilge water removal needs

Easy to Install and Use: ease of use is a key feature of marine bilge pumps for boats; Its installation process is straightforward, enabling you to get it up and running within no time; With this pump, dealing with bilge water becomes an easy experience

Wide Applications: portable bilge pumps for boats' versatile design offers wide applications for different boat types ranging from sailboats, fishing boats, to yachts; The 0.75 inch/ 19mm nylon pipe joint outlet makes it a convenient solution for various boating needs

Reliable Material: constructed from robust, resistant material, 12 volt bilge pump with bilge pump float switch boasts of durability; The hardy composition ensures it withstands most sorts of conditions, presenting a reliable solution for your boating needs; It comes in colors of red, blue, and white, adding a vibrancy to your boat's functional equipment

Specifications and Dimensions: 12V 750GPH portable bilge pumps for boats operate at a flow rate of 750 GPH and a voltage of 12 V DC, ensuring maximum efficiency in pumping out bilge water; Its compact dimensions make it fit for your boat without taking up much space

(1) 3/4 inch Check Valve, prevent the back flow into the circulation pump.

(2) 3/4 inch Check Valve for Marine Bilge, prevent the back flow into into the marine bilge.

(3) 2 pcs of check valves.

-Package includes : 1 x 12 V 1100 GPH bilge pump and 1 x marine bilge pump float switch with comprehensive mounting kit including 78.74" / 2 metre bilge pump hose, 2 hose clamps and 1 through hull connector.

- Installation position: Usually installed in the bottom of the ship at the lowest point, in order to effectively discharge water. One can also be installed in each closed compartment, and ensure that the drain is at least 20 cm above the water line.

- Self-priming performance: It has good self-priming performance and can automatically absorb water without the need to divert water.

- Material: Its housing is made of ABS material, which can handle some impact situations well. It has an easy-to-clean spring-lock filter base, and a detachable motor for easy maintenance and cleaning of the impeller cavity.

- Scope of application: Applicable to all kinds of ships, including warships, fishing boats, etc., can be used for bilge ballast, fire, life and other purposes of seawater, fresh water transportation.