Lead2Amazon

Heavy-walled formed PVC

Angled ends to deflect watercraft

23"L x 7-7/8"H x 6"D

Brand: Taylor Made Products

Part Number: 46012

Dock Edging Clear 10' P-Shape

Made from quality marine grade resins and with the same double molding process

P-PROFILE DOCK EDGING: Commercial grade P-shape design has a double cavity with a single rib to prevent edging from crushing under the pressure of heavy boats – keeping boats from scraping against sharp corners and dock edges

LEDGE TOP: With a flat back and ledge top, P-Profile Dock Edging fits perfectly over the edges of horizontal installations

EASY TO INSTALL: Simply uncoil, cut to size with a handsaw, and secure with screws on the top and sides – EasyFlex Galvanized Deck and Dock Screws are recommended for installation and sold separately

NO COLOR TRANSFER: Made with pigmented plastic, this rub rail has no “skin coat” on the top surface – meaning no scuffing on your boat, or showing a different base color after being rubbed

INCLUDES: 10 foot roll of black dock edging, made with flexible recycled PVC

Reliable Keel Guards for Boats: Our keel guard protect your boat keel from sand, rocks, concrete ramps, oyster beds, underwater objects and reduce scrapes, daily wear and tear on the water. Save the keel from any future possible damage with our keel guards and save the cost of boat repairing form continuous shore landing.

Compatibility: Please MUST read the Product Description before purchase. Keel guard for fiberglass boats (Bass Boats, Ranger Bass Boat, Ski Boats, Wake Boats, Runabouts) + Some aluminum boats (Fishing and Jon Boats) + Recreational watercraft (Ski Boats, Skiffs, Dinghy and most Jet Boats). The boat keel guard protector can be applied on slightly raised strakes and chines with applied sealant to seal off gaps.

Premium Workmanship: The keel protector for boats is produced from thick and durable materials that absorb the shocks and impacts with maximum protection on your boat keel. The rugged and flexible 5 inch wide boat hull protector conforms to your boat's keel easily and won't drag your boat down.

Easy to Install with Strong Adhesion: The boat keel protector comes with strong self-adhesive 3M tape that provide firm and tight application. Just stick keel guards on prepared hull surface, delimit, etch, clean, prime and apply! Warm tips: keel primer was not included in the kit.

Size Guide: The 7 foot Keel Guard fit boat size up to 20 ft. It is recommended that apply the keelguard keel protector beyond the lowest point of the boat which protect your boat from snagging and tearing when beaching or loading. The length of boat keel protection can be extended, but not shorten it.

Buy with Confidence: We are confident with our shield keel guard, if you have any problems or questions, just contact with us and our Customer Service Team will help you within 24 hours.

THICK TOUGH PROTECTION: Keep your boat or PWC looking like new with our boat dock bumper guards. Our dock pole bumpers or horizontal protectors are constructed from heavy duty, high density, closed cell foam that won't deflate or collapse over time.

MARINE RESISTANT: Designed to withstand the elements, our deck or piling bumpers for boat dock protection are covered in thick tri laminate UV resistant vinyl and polyester. The seams are double thermal bonded with corrosion resistant grommets.

EASY INSTALLATION: Our interior or vertical dock bumper edge pads come with stainless steel screws and washers to easily mount them in various different configurations including edges or post. Ends are angled in to allow interior wrapping in a slip.

2 YEAR REPLACEMENT WARRANTY: We are so confident in our boat dock accessories and these boat dock bumpers marine solution, that we will replace them within 2 years from manufacturers defects. Available in 24,36 and 59 inch bars and a corner piece.

WHY BETTER BOAT: We are a family owned American business committed to making premium quality boat and RV accessories, care and cleaning supplies. We stand behind your satisfaction and our products including our Dock Fenders and Dock Bumpers.

Allows you to mount a new galvanized pipe to support your dock

These brackets come with two set bolts for the tightest grip. This makes for a safe and tight grip

After mounting the bracket to your dock frame, insert the galvanized pipe, and add augers or foot plates for the bottom of the pipe

5" (12, 7cm) dia., 18" (45, 7cm) - designed to fit Pipe up to 2" (5, 1cm) o.D

Large, durable bumpers add an attractive and functionally rugged cushion to the leg pipes of your docking System

Fabricated from the same quality material as our dolphin fenders, each measures 18" (45, 7cm) tall with a diameter of 5" (12, 7cm)

Each torpedo bumper also includes a molded-in air valve for easy inflation or deflation as desired

When placed over dock leg pipes and mounting Brackets, they prevent damage to your craft from protruding bolts

Total board width: 11-1/2"

Total board length: 47-7/8"

Constructed from UV-resistant material

Offers exceptional durability and remains cool to the touch even under direct sunlight

Slotted design facilitates efficient drainage of water and allows light penetration for marine vegetation beneath the dock

Made to Withstand Harsh Environments: made from resistant PP material, these marine dock post caps provide a solid structure; This construction offers longevity, providing long lasting protection against the challenging marine environmental conditions

Measurement Method: black flat cap is about 9 x 9 x 1.77 inches, use a string to measure the circumference of the pile, divide the length of the string by 3.14159 to find the diameter of the cone; Please use the perimeter method for each individual pile and do not measure the diameter; Note that the piles are not completely round, and they are not all the same size

Secure Your Entire Dock: the package includes 4 pieces of marine dock piling caps, enabling you to protect multiple dock piles at once; This efficient pack system effectively provides extensive coverage, making it a practical choice for securing the entire docking structure

Extend the Lifespan of Your Dock: our piling caps are designed to safeguard your piles from chipping, weathering, and damage preventing internal rot; This crucial step ensures preservation, maintaining the life and integrity of your dock; The cover is flexible and can withstand deformed piles, but will not stretch

Style and Functionality: not only do these piling caps for docks perform exceptionally in their protective role, but they also enhance your dock's overall appearance; The sleek design and black finish provide a subtle, stylish addition, highlighting your investment's visual appeal as well as its functionality

✅ Leg Holder bracket can effectively fix the galvanized pipe legs! Helps dock smoothly slide up and down with the water levels.

✅ 4 Pack 5 in. x 5 in. x 1/8 in. leg holders.

✅ Application: anchor chain holder, HD leg holder or pile guide.

✅ Leg Holder has 3/8 in. holes; mounting: 3/8 in. x 2-1/2 in. (not included)

✅ If you have any questions, please feel free to contact us, we will provide you with satisfactory service in time.