Lead2Amazon

Dock Heavy Duty Hardware: Constructed from marine grade 1/4" thickness standard hot-dipped galvanized steel hardware and welded onto a heavy duty 5" x 5" backer plate, featuring solid, durable and rustproof to fit for the freshwater and marine environments. Stationary dock heavy duty corner leg pipe holder is aiming to provide the long useful service for your floating docks.

Build Floating Docks: Stationary dock heavy duty side leg pipe holder bolts to the corner of the wood floating dock frames to support a dock pipe leg, allowing the floating dock to smoothly slide up and down with the water levels and stabilize the dock on the lake.

Compatibility: The inner diameter of the floating dock pipe holder fit for round dock side leg pipe up to 2″ OD. Accommodating various pipe sizes by side bracket set screws. The floating dock heavy hardware mounting holes is 7/16”fitting for 3/8” carriage bolts (carriage bolts are not included).

Easy to Use: Pre-punched bolt patterns allows to easily install directly to the side of dock frame. Installed the dock side leg pipe holder in the wooden floating docks with four carriage bolts (not included). Loosen and tighten the set bolts with shoulder nut to adjust the height of the dock, allowing the dock float.

Warm Tips: The industry standard calls the floating dock pipe size as 1.5″ schedule 40 but the O.D. is actually 1 7/8″. Please check the size of dock leg pipe before purchasing.

Other Dock Heavy Hardware for Building Floating Docks: The stationary dock side leg pipe holder bolts to the side of the wood floating dock frames to stabilize your pier (ASIN: B0D47V2P9M). Connector Hinges used for between-dock and shore-to-dock or ramp connections and not fit for individual dock sections (ASIN: B0D47VHP8J). If you need these dock heavy duty hardware, please search the ASIN on the amazon.

Dock Heavy Duty Hardware: Dock connector hinge kit comes with male & female hardware brackets and dock hinge pin. Constructed from marine grade 1/4" thickness standard hot-dipped galvanized steel hardware and welded onto a heavy duty 5" x 3-1/2" backer plate, featuring solid, durable and rustproof to fit for the freshwater and marine environments. Floating dock connector hinge kit is aiming to provide the long useful service for your floating docks.

Build Floating Docks: Floating dock heavy hardware dock hinge kit attach the ramp to floating dock, provide a smooth deck surface while allowing the dock to hinge up and down.

Compatibility: The floating dock heavy hardware brackets mounting holes is 7/16". Universal hole placement fits 2" x 8" & over lumber. Dock ramp hinge holes fit for 3/8" carriage bolts (not included).

Easy to Use: Lay both pieces flat and match. Mark & drill out the center of the holes and Install the floating dock hinge on the wood dock. There are enough distance between the floating dock hinge brackets to make them easy to connect with the main pin and locking pin. Quick & easy to install and detach.

Other Dock Heavy Hardware for Building Floating Docks: The stationary dock side leg pipe holder bolts to the side of the wood floating dock frames to stabilize your pier (ASIN: B0D47V2P9M). The Dock Outside Corner leg pipe holder fit the corner of the floating docks to stabilize your pier (ASIN: B0D47TS6FS). If you need these dock heavy duty hardware, please search the ASIN on the amazon.

Also outstanding protection for boat gunnels

Made of rugged, air-filled, heavy-walled formed PVC

Designed with angled ends to help deflect craft

Sold individually

Sold individually

The size of the connector hinge backer plate is 4" x 4", with a hole diameter of 3/4".

Heavy duty hinge, thick metal, quality welds, well galvanized.

Dock accessories is excellent for attaching your ramp to your floating dock.

Dock hardware brackets have enough distance between the flanges to make them easy to connect with the main pin and locking pin.

Installed easily and easy to detach, Replacing pins was easy.

Ideal Package: our package includes 2 boat dock accessories; It's an ideal set for the people seeking to keep his or her dock working efficiently

Quality Material Ensures Longevity: our stationary dock heavy duty side leg pipe holder is made of robust, quality steel, which translates to durability; You can rely on this boat dock accessory for an extended useful life, thanks to the sturdy material composition; Its silver color gel well with most decors, adding an aesthetic appeal to your dock

Ideal Size: with a backplate that measures about 5.25 x 5.25 inches/ 13.34 x 13.34 cm and a bracket diameter of approximately 2.25 inches/ 5.71 cm, these dock accessories are designed for effective use; They accommodate multiple sizes of pipes making them the popular choice for the people seeking practical yet powerful floating dock solutions

Easy to Use: this pipe holder, part of our extensive dock accessories range, is extremely easy to install and use; Just use 3/8 inch carriage bolts not included to secure the dock and build your dock

Accommodates Multiple Sizes of Pipes: the floating dock kit can easily accommodate various pipe sizes, size adjustable via side bracket screws; It's a versatile addition to our dock that has been designed to make your life on the water much easier and fun

The size of the backboard is 5 1/5in, the mounting Holes is 7/16", and the inner diameter of the pipe support is 2 1/4 ".

Heavy duty good sturdy material, thick metal, quality welds, well galvanized.

Dock pole bracket works well and holds fence post to your floating dock very well.

Equipped with two screws for easy adjustment of tightness to fit most diameter rods.

Complete satisfaction: Please don't hesitate to contact us via Amazon message system if at any time you aren't completely happy with your purchased, we'll provide you a satisfactory solution. Buy with confidence.

Using Sebnux boat keel guard can minimum future possible damage from sand, rocks, concrete ramps, oyster beds, underwater objects and reduce scrapes, daily wear and tear on the water.

High-strength marine rubber provides the product with better anti-collision and corrosion resistance.

Sebnux 5-inch wide boat keel protection easily conforms to your boat's keel; it’s shock absorbing, exclusive contoured edge design, and drag reduction channels won't slow your boat down

Sebnux boat keel protector features special self-sealing contoured edge, that, save messy sealants. Only needs 4 easy simple steps; etch, clean, prime, apply!

Sebnux provides 5 sizes range from 4 to 8 feet long to ensure you have the correct size.

INDUSTRY LEADING DOCK FLOAT: The Eagle Float is the industry's most trusted dock float. Superior quality, durability, appearance, and price point make these floats the go-to option for everything from marinas to DIY pond docks.

EASY INSTALLATION: These foam filled dock floats come equipped with mounting slots molded directly into the flat tops for simple attachment to docks, piers, or other structures.

PROTECTED FROM THE ELEMENTS: A UV-inhibited shell guards against damage from oil, gas, sun exposure, and marine life to keep Eagle Floats looking their best for years.

DURABLE ONE-PIECE DESIGN: Made from a single piece of thick, extra strong polyethylene with no seams, Eagle Floats will not separate or leak like competing floats.

WEATHERPROOF PERFORMANCE: Built to withstand rain, waves, temperature extremes and more, Eagle Floats provide dependable floating and protection anywhere on or around the water.

You Will Receive: 2 boat bumpers for docking, ensuring you have everything you need for a secure and easy installation; This set provides a complete docking solution, catering to all your docking needs; The bumpers effortlessly shield your boat and dock, making it a necessity for every boat owner

Quality Material Construction: our boat hull protectors are crafted with UV and rip resistant vinyl, polyester tri laminate, and high density closed cell foam. These quality materials can withstand considerable force and severe weather conditions, ensuring long lasting. This serviceable construction gives the bumpers an edge, making them an ideal choice for protecting your boat

Easy Installation: these boat buoys bumpers come equipped with metal grommets for an effortless installation process. The bumpers can be conveniently affixed to boats, docks, and posts, providing an optimal protective layer against scratches, dents, and nicks. The grommets ensure a secure attachment, making the installation process hassle free

Comprehensive Coverage: our dock bumpers marine measure about 60 inches in length, offering a wide protective layer. This long length ensures your boat is shielded from scratches, dents, or others during docking or mooring. The comprehensive coverage ensures the complete protection of your boat's edge

Versatile Design: the boat dock bumpers are designed with versatility in mind. They are suitable for straight edges, the same 2 pieces can also fit corner edges. This versatile design makes the bumpers a practical choice for daily docking needs, giving you the flexibility to adequately protect your boat in any docking situation