Lead2Amazon

Build to Last: Crafted from high-strength chrome vanadium steel, exceeds ANSI standards. Fully chrome and mirror polished surface ensures life durability and resistance to corrosion

Full Size Set: 22-pcs commonly used crowfeet wrenches and two 3/8” drive extension bars(3 & 6 inches) meet your daily work needs. Metric: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 22mm. Standard: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8"

Crows Foot: Flare nut head provides a secure grip for reduced risk of fastener damage when reaching and holding nuts or boltheads in hard-to-reach spots on your car or vehicle

3/8 Inch Drive: Suited for 3/8” extension bars, ratchets, and torque wrenches with high compatibility, perfect for tight and narrow spaces in motorcycle maintenance and car repair

Keep Organized: Comes with an EVA foam organizer for convenient storage. Sizes are printed on both the wrench and EVA foam for easier and faster identification

Optimized for Engagement, Access, and Strength – Our deep, 6-point design maximizes your contact with fittings and prevents slipping

Reinforced Jaw Strength – We reinforced our wrenches with material where it matters most to avoid high stress concentrations and prevent the jaws from spreading

15-Degree Offset Increases Access Angles – The jaw opening is offset 15 degrees from the center of the wrench so that it can be flipped over to gain additional access angles

Electroless Nickel Plating for Corrosion Resistance – The electroless nickel plating finish is easy to wipe clean, highly resistant to corrosion, and has a low environmental impact compared to conventional hexavalent chrome plating

Uniform Coverage and Better Fit – The electroless plating process applies a uniform coating to the entire tool surface; by comparison, electroplating, including conventional chrome plating, has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool

Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials; most of the steps, including machining, broaching, blasting, plating and engraving, take place at Tekton's manufacturing facility in Grand Rapids, Michigan

Fits most standard gas valves

Quickly shut off gas in an emergency

Both rectangular openings measure 1-1/16 inch wide, by 1/2 inch height

Solid steel construction

Comparing the opening sizes above to the actual size of the gate valve on the gas meter is recommended prior to purchasing to confirm correct tool size/selection

Please refer to the line art drawing for dimensions and compare with your needs before ordering

For tightening and removal of nuts and bolts in confined areas

Constructed with chrome vanadium steel for strength and durability

Mirror polish finish

Metric Size: 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm. Lightweight, easy to carry around.

Made of Chrome Vanadium Steel with full polished and mirror finished to provide strength and corrosion resistance.

The spanner was tipped at a certain angle each end to get extra accessibility when working in tight places.

The Double head open end wrench is great for use in confined or loose spaces, Help you get the job done quickly.

Complete set for bicycle, motorcycle, car repair repairing and maintaining, home use, electronics and small equipment etc..

4658

VERSATILE SIZES: Includes 12mm, 14mm (3/8" drive) and 16mm, 17mm, 18mm, 19mm (1/2" drive), covering essential sizes for various applications, including automotive and hydraulic line repairs.

HIGH DURABILITY: Crafted from chrome vanadium steel with a black phosphate finish for superior corrosion resistance and long-term reliability in demanding conditions.

180° FLEX-HEAD DESIGN: Allows full maneuverability in tight spaces, ideal for accessing flare nuts, fuel lines, and hydraulic lines with ease.

PRECISE FLARE NUT DESIGN: The 6-point opening ensures a secure grip and effective torque application, minimizing damage to fasteners and enhancing performance.

OPTIMIZED CONFIGURATION: Perfect for automotive repairs and hydraulic maintenance, this set offers a practical range of sizes for both professional and DIY use.

Set Includes: 5.5x7mm, 8x9mm, 10x12mm, 11x13mm, 14x17mm, 15x16mm, 19x21mm, 22x23mm, 24x27mm.

Super-thin ultra low profile wrenches let you reach fasteners in tight clearance. Just 0.11 inch thin.

The wrench head is tipped at a 15-degree angle. Useful especially in narrow spots,after each 15-degree turn, flip the wrench over to quickly engage the fastener again

This super thin open end wrench set is constructed of premium forged steel with mirror polish finish, is truly versatile and are made to last.

Our super thin double open end wrench with practical design can be widely used on bicycle, motorcycle, car repair, maintaining, household, machinery ect.

Open End Service Wrench 30? Angle Satin - 1-1/2"

Open End Service Wrench 30? Angle Satin - 1-1/2"

Open End Service Wrench 30? Angle Satin - 1-1/2"

Open End Service Wrench 30? Angle Satin - 1-1/2"

Open End Service Wrench 30? Angle Satin - 1-1/2"

1-1/2-Inch

30 Degree angle

Service wrench

More torque, longer life, higher strength

Meets or exceeds ASME B107.1100

Made of alloy steel, electroplated black zinc, durable. Has excellent anti-rust properties to ensure long-term trouble-free use

Very suitable for barrel nut to makeup and torque

1-3/16" ( Tolerance +/- 0.1mm)wide mouth4,Fits 1/2" square drive, rated torque 35 ft-lbs