Lead2Amazon

IMPORTANT: Pilot hole size determines the drill chuck key you need. Use a caliper or ruler to accurately measure the pilot's size (the hole diameter where the key fits into the chuck).

CONFIRM CORRECT SIZE BEFORE ORDERING. This key is specifically designed to fit drill chucks with a .315"/8mm pilot size.

Compact, lightweight and precisely machined to ensure a secure fit and proper engagement with the chuck.

Made from durable and sturdy steel for reliable performance. ONLY COMPATIBLE with drill chucks with .315"/8mm pilot hole size.

Choose a replacement drill chuck key that matches the pilot size of your drill chuck for proper fit and functionality.

Heavy duty heat-treated drill chuck operates with less than 0.004 inches of runout (0.1 mm)

Holds drill bits anywhere from 1/64 to 1/2 inches in diameter

Easily open and close the three chuck jaws without any tools or keys

Universal design fits onto any drill press, milling machine, or CNC lathe with a JT33 spindle

Compatible with WEN models 4208, 4210, 4210T and 4212 drill presses

VERSATILE: The Bosch HA3JAW keyless chuck delivers rotation drilling for masonry, brick, and block

UNIVERSAL FIT: The three-jaw chuck is built for use with all Bosch and competitive brands SDS-plus hammers

EFFICIENT: Keyless ratcheting quickly locks straight shank drill bits into place.

DURABLE: The HA3JAW is built with a steel metal sleeve for maximum rugged durability.

FOR USE: Use only in drill-only mode on all SDS-plus rotary hammers

Instantly convert impact driver to hold non-quick change drill & driver bits

Keyless chuck finger-tightens for easy bit changes

Precision three jaws,tightly well,capacity: 0.02" (0.5 mm) to 0.3" (8 mm)

Quick-change hex shank for instant swaps

Fits all chucks, 1/4" impact drivers, & quick-change adapters

Capacity Range 1.5mm - 10mm/ 1/16" - 3/8", Mount: 3/8"-24UNF

Classic keyed 3-jaw design for conveniently tighten and securely hold

1/2" Square Female adapter can easily transform power impact wrench to a drill

Constructed with all metal for supreme durability

Please Note: The chuck can NOT be used counterclockwise!

DURABILITY: The chuck is high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating. All the extensions are applied with rust-proof finishing for extended service life.

HIGHLY COMPATIBLE: Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16” to 3/8” shank.

UNIVERSAL SHANK: Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function.

MULTI PURPOSE: With included 1/2” Drive by 1/4” Hex adapter, can easily transform power impact wrench to a drill, with best performance under rotation speed between 500rpm ~ 3500rpm.

INCLUDES: This complete power tool conversion kit includes keyed 3/8” drill chuck, a chuck key and a 1/2” Dr. x 1/4” Hex adaptor.

√【Material】Double cut carbide rotary burr set,tungsten carbide,can be used to process: iron, steel etc.. Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Total length: 45-50 mm( 1.77-2 inch).1/8” fits dremel tool, straight shank can be held by most rotary tool with three jaw chuck for accurate centering.Please check the size before you buy it.

√【Durable】Carbide rotary burr's packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns.

√【High efficiency and Practical】The rotary tools processing efficiency is higher than the manual file tool. 10 different types of carving kit drill bits, meet your different needs.No wear out after a long time use. The shaft will not bend at high speed.

√【Double Cut Design】 The double cut burr head groove lines of the head are crossed, produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control.

√【A Good Rotary tool】 A good choice of DIY carving, engraving, and polishing. Suitable for multiple types of rotating tools.Making DIY carving fans much easier to do the wood carving job.It is also an ideal gift for woodcarvers.

Please refer to the following description for the actual product size specification

Size specification and color: one black 0.3-6.5mm and one black 0.3-3.6mm

Ideal Accessor: 1/4-inch hex shank snaps easily into the power screwdriver.

Easily the locks and releases drill bits, quickly convert your quick change hex shank driver unto a drill.

Application: Allows hex drive power foitechy tools to use but drill bits.Using Convience: Install Conveniently, safely and quickly.can be use with other brand tools and drill bits

IMPORTANT: Please measure the gap between your drill chuck and your arbor to see if your gap is large enough to fit our heavy duty, thick wedges.

CONFIRM CORRECT SIZE BEFORE ORDERING. These drill chuck removal tools are made to work with your JT6 and JT33 drill chuck.

Thick and durable for reliable performance.

The size of the gap between the drill chuck and arbor for removal will vary depending on the specific chuck and arbor involved.

Please confirm the thickness of our wedges will fit in your application before ordering. Choose the right removal tool that matches the taper of your drill chuck for proper fit and functionality.

Drill chuck for impact driver 4 way multi tool key is the ideal tool for unlocking and locking of various, popular drill chucks to keep drill bits in place

Key tool is made of high hardness torsion bar, which can withstand greater resistance, stronger force, sturdy and durable, ideal electric drill accessories.

Black plating on the surface of drill chuck key, deep anti-rust, compact and wear-resistant

Drill press chuck key's center square feature is ideal for opening acetylene tanks

Central machinery drill press have four sizes to, you can open many kinds of electric drill locks with just one chuck key.