Lead2Amazon

Better Safety: This battery adapter features upgraded wiring protection and a built-in switch, allowing you to easily turn the battery on and off. Equipped with 30A fuses and 12 AWG wire to reduce excessive current from damaging the battery and power equipment, enhancing conductivity and safety

User-Friendly Design: Constructed from durable ABS plastic, the power wheel battery adapter is resistant to corrosion and heat. There are 3 mounting holes on the battery adapter, comes with wire terminals, 30A fuses, screws and drywall anchors. Rich accessories to make your DIY work easier, you can fix it anywhere!

Compatibility: Perfectly compatible with Ryobi 18V lithium batteries, works with P102, P103, P104, P105, P107, P108, P109, PBP002, PBP003, PBP004, PBP005, PBP006, P189, P190, P191, P192, P193, P194, P195, P197, BPL-1820G, BPL-1815, BPL-18152 etc. Our battery adapter connector fits snugly, ensuring easy installation and secure battery locking

Convenient wiring: The battery converter is equipped with wiring terminals, the red wire is connected to the positive terminal, and the black wire is connected to the negative terminal. When using, make sure the positive and negative wires correspond correctly

Widely Applicable: The power wheel adapter is installed 12 AWG wire with a maximum allowable current of 20A. This 18V battery adapter is ideal for upgrading your power tools, remote control toys, RC car, work lights, robotics DIY, and more. If you don’t use it for a long time, please be sure to remove the battery from the adapter

Adapter Upgrade Kit: The battery adapter comes with a 9-inch 12AWG wire, and 3 mounting holes on the adapter. The kit includes 3 screws and drywall anchors for easy fixing without the need for drilling holes, allowing you to secure the adapter anywhere you need

Safe and Reliable: Made from ABS flame retardant material, this battery converter is built for durability and long-term use. Equipped with a fuse base on the wire and 3 30A fuses for overcurrent protection, ensuring safety and stability

Wide Compatibility: Perfectly compatible with Ryobi 18V ONE+ batteries, including P102, P103, P104, P105, P107, P108, P109, PBP002, PBP003, PBP004, PBP005, PBP006, P189, P190, P191, P192, P193, P194, P195, P197, BPL-1820G, BPL-1815, BPL-18152, and more. Easy to install and securely locks your battery in place

Easy to Use: Install the battery and 30A fuse, then connect your device using the wire terminals. This setup is convenient for connecting the positive and negative wires of the adapter to one end of the terminal and the device to the other end, ensuring a quick and secure connection

Versatile Applications: This power wheel battery conversion kit is perfect for upgrading your ride-on cars, remote control toys, robot DIY projects, emergency power supply, and more. Includes 3 spare fuses for easy replacement when needed

Important Tips: This adapter is designed for output use only and is not for charging batteries. Remove the battery from the adapter if not in use for an extended period. Ensure correct connection of positive and negative wires to avoid malfunction. Proper usage will enhance the longevity and performance of your devices

Compatibility with Milwaukee M18 18V Battery Series, including 48-11-1815, 48-11-1820, 48-11-1828, 48-11-1840, 48-11-1850, 48-11-1860, and more. Our battery adapter connector is precision-engineered for a secure fit onto your battery, ensuring easy installation and reliable locking. Crafted from robust ABS plastic, it boasts heat resistance and exceptional corrosion resistance, making it suitable for both indoor and outdoor applications.

Versatile Application: The power wheel battery adapter boasts a robust 14-gauge wire configuration, capable of handling a maximum permissible current of 30A. This substantial power capacity empowers upgrades to a variety of devices such as power tools, ride-on toys, work lights, and DIY robotics projects. The comprehensive package encompasses 1 power wheel adapter with fuse holder, 3 30Amp fuses, 1 wiring terminal.

User-Friendly Operation: Achieving ease of use is simple – just slide the power adapter into the designated groove and subsequently push the converter until it securely latches onto the battery. For removal, press down on the battery buckle before detaching the adapter. Additionally, the adapter features two screw holes designed for secure attachment to walls, machinery, or DIY projects.

Key Considerations: It's essential to note that this converter functions solely as a power output and not as a charger, directly utilizing voltage and power from your battery. Proper wiring involves connecting the red wire to the positive terminal and the black wire to the negative terminal. During usage, ensure alignment between the device's positive and negative wires and those of the adapter. When not in use for extended periods, remember to detach the battery from the adapter.

Wire Harness Connector: This Power Wheels battery adapter kit includes a fuse holder, 30A fuse, and black wire harness connector, perfect for upgrading Fisher-Price Power Wheels 12V ride-on cars for improved power performance

Safe and Reliable: Built with ABS flame-retardant material and 12AWG wire. Equipped with a fuse base and 3x 30A fuses for overcurrent protection, ensuring enhanced safety, durability, and long-term use

Wide Compatibility: Compatible with Ryobi 18V ONE+ batteries, including P102, P103, P104, P105, P107, P108, P109, PBP002, PBP003, PBP004, PBP005, PBP006, P189, P190, P191, P192, P193, P194, P195, P197, and more

Easy Installation: Simply insert the battery and 30A fuse, then connect to Power Wheels ride-on toys. Includes 3 screws and drywall anchors, allowing easy, secure mounting without drilling

Important Tips: This adapter is designed for output use only and is not for charging batteries. Ensure to remove the battery from the adapter when not in use for an extended period to maintain battery health and safety

✅Compatible with Milwaukee M12 battery series 48-11-2450 / 48-11-2440 / 48-11-2411 / 48-11-2420 / 48-11-2401 / 48-11-2460 and more. Our battery adapter connector is well-made, snug fit your battery, can install and lock battery easily. Made of ABS plastic, heat resistant and not easy to corrode, perfect for indoor and outdoor use.

✅Better security, our product upgrade has some security design. Added switch ensures you can turn on&off the battery easily, equipped 30Amp fuse protect battery devices from overpower damage, fuse holder rubber cap fits on tightly to protect blade fuse inside. High quality silicone copper wire improves the conductivity and safety, heat-resistance 12 AWG wire is suitable for high-power applications.

✅Easy to use, only need to move the power adapter into the groove, then push converter and make sure it has locked the battery. If you want to remove the adaptor from the battery, please press down the buckle of the battery, then remove it. There are 4 fixing screw holes on the adapter, can be well fixed to the walls, machines or DIY product.

✅Widely used, battery adapter has 12 gauge wire installed, Maximum permissible current 20A, provides enough power upgrade your power tools, ride on toys, work lights or robotics DIY. Package includes 1 pack adapter with fuse holder and 3 pack 30Amp fuse and 1 pack wiring terminal, 4 screw fasteners. (Note: battery not included)

✅Important Tips: This converter is not a charger, it only outputs the voltage and power directly from your battery. The red wire is connected to the positive terminal, black wire is connected to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. If not used for a long time, please be sure to remove the battery form the adapter.

Better Safety: This battery adapter features upgraded wiring protection and a built-in switch to ensure you can easily turn the battery on and off. In addition, the waterproof fuse holder, 30A fuse, heat-resistant ABS material, and premium 12AWG wire are configured for high-power applications for increased safety and conductivity

More convenient: The battery adapter comes with wire terminals, 30A fuses, screws, and drywall anchors. Rich accessories to make your DIY work easier, and ideal for indoor and outdoor use! (Note: battery not included)

Compatibility: Perfectly compatible with Dewalt 18V/20V lithium batteries, works with DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Our battery adapter connector is well-designed, snugly fits to your battery, easy to install and remove

Widely applicable: Use this battery adapter to power other devices. The max allowable current is 20A for 12AWG wire. You can safely upgrade your power wheels toy cars, Rc trucks, robots, work lights, etc. Enjoy your DIY

Important Note: 1. This power wheel adapter is not a charger, it only outputs the voltage and power directly from your battery. 2. The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. 3. If you don’t use it for a long time, please be sure to remove the battery from the adapter

Wire Harness Connector Compatible: Perfectly compatible with all Peg-Perego 12-volt ride-on toys, this wire harness connector can safely connect to the standard 12 volt SLA and lithium battery ride on toys

Battery Adapter Compatible: Perfectly compatible with Dewalt 18V/20V lithium batteries, works with DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Our battery adapter is well-design, snugly fit your battery, easy to install and remove

More Convenient: The battery adapter comes with Wire Harness Connector, with a fuse holder and three 40A fuses, screws, and drywall anchors. Rich accessories to make your DIY work easier, and ideal for 12V Riding Toys! (Note: battery not included)

Widely Applicable: Use this battery adapter to power the standard 12 volt SLA and lithium battery riding toys . The max allowable current is 20A for 12AWG wires. You can safely upgrade your power wheels toy cars without changing the existing circuits

Important Note: This power wheels adapter is not a charger, it only outputs the voltage and power directly from your battery. If you don’t use it for a long time, please be sure to remove the battery from the adapter. If you have any questions, please feel free to consult us

✅Compatible with Milwaukee M12 battery series 48-11-2450 / 48-11-2440 / 48-11-2411 / 48-11-2420 / 48-11-2401 / 48-11-2460 and more. Our battery adapter connector is well-made, snug fit your battery, can install and lock battery easily. Made of ABS plastic, heat resistant and not easy to corrode, perfect for indoor and outdoor use.

✅Better security, our product upgrade has some security design. Added switch ensures you can turn on&off the battery easily, equipped 30Amp fuse protect battery devices from overpower damage, fuse holder rubber cap fits on tightly to protect blade fuse inside. High quality silicone copper wire improves the conductivity and safety, heat-resistance 12 AWG wire is suitable for high-power applications.

✅Easy to use, only need to move the power adapter into the groove, then push converter and make sure it has locked the battery. If you want to remove the adaptor from the battery, please press down the buckle of the battery, then remove it. There are 4 fixing screw holes on the adapter, can be well fixed to the walls, machines or DIY product.

✅Widely used, power wheel battery adapter has 12 gauge wire installed, Maximum permissible current 20A, provides enough power upgrade your power tools, ride on toys, work lights or robotics DIY. Package includes 2 pack power wheel adapter with fuse holder and 6 pack 30Amp fuse and 2 pack wiring terminal, 8 screw fasteners. (Note: battery not included)

✅Important Tips: This converter is not a charger, it only outputs the voltage and power directly from your battery. The red wire is connected to the positive terminal, black wire is connected to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. If not used for a long time, please be sure to remove the battery form the adapter.

【Adapter Compatibility Battery】The for power wheel adapter is perfectly compatible with the Makita 18V LXT Battery Lithium-Ion series, such as BL1850B, BL1860B,BL1830B,BL1840B,BL1820B etc.Our battery adapter is well-design, snugly fit your battery, easy to install and remove.

【Wire Harness Connector Compatible】This 18V battery connector is Perfectly compatible with Peg-Perego 12 volt for power wheel, this wire harness connector can safely connect to the standard for power wheel Peg-Perego 12 volt SLA and 12-volt lithium battery riding toys.

【Two Upgrades Safety】The for power wheel converter with 12 AWG wire and 40A fuse. The thick copper wire improves conductivity and safety, allows large current to make safe use on equipment. And the fuse holder can prevent excessive transient current from damaging the battery and equipment.

【Widely Applicable】This battery adapter is suitable for upgrading your for power wheel, You can safely upgrade your for power wheel toy cars without changing the existing circuits.. Suitable for RC toys, robotics and other DIY projects.

【Important Note】This for power wheel adapter is not a charger, it only outputs the voltage and power directly from your battery. If you don’t use it for a long time, please be sure to remove the battery from the adapter. If you have any questions, please feel free to consult us.

✅Compatible with Dewalt 20V /18V DCB series battery, work with for DCB205 DCB206 DCB204 DCB203 DCB200 DCB201 etc. Our battery adapter connector is well-made, snug fit your battery, can install and lock battery easily. Made of durable ABS plastic, heat resistant and not easy to corrode, perfect for indoor and outdoor use.

✅Better security, our product upgrade has some security design. Equipped with 30Amp fuse protects the battery equipment from being damaged by excessive power. Waterproof fuse holder rubber cap fits on tightly to protect blade fuse inside. High quality silicone copper wire improves the conductivity and safety, heat-resistance 12 AWG wire is suitable for high-power applications.

✅Easy to use, only need to move the power adapter into the groove, then push converter and make sure it has locked the battery. If you want to remove the adaptor from the battery, please press down the buckle of the battery, then remove it. There are 2 fixing screw holes on the adapter, can be well fixed to the walls, machines or DIY product.

✅Widely used, power wheels adapter has 12 gauge wire installed, Maximum permissible current 20A, can use it to upgrade your power wheels, rc toys, work lights or Robotics DIY with enough power. Package includes 2 pack power wheels adaptors with fuse holderand 6 pack 30Amp fuse and 2pack wiring terminal. (Note: battery not included)

✅Important Tips: This converter is not a charger, it only outputs the voltage and power directly from your battery. The red wire is connected to the positive terminal, black wire is connected to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter. If not used for a long time, please be sure to remove the battery form the adapter.