Price: $9.99 [New: In Stock (ZHUOBAO: 4.72 Point Based on 172 Customers)] [ : Fulfilled by Amazon][ : Free Shipping][ : Amazon Prime]
Quick Removal: This desoldering wick and no clean flux paste set allows for fast, effective removal of solder from circuit boards without damaging components.
Low Residue: No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning
High Activity Rosin Can Help To Remove The Oxide Layer On The Welding Surface Easily
Convenient Kit: Get both desoldering wick and no clean flux paste together in one compact kit for complete soldering and desoldering solutions wherever your repair work takes you.
Reliable Brand: Trusted by electronics technicians, this brand delivers consistent performance repair after repair.
Price: $18.99 [New: In Stock (BEEYUIHF: 4.83 Point Based on 104 Customers)] [ : Fulfilled by Amazon][ : Free Shipping][ : Amazon Prime]
BEEYUIHF Desoldering wick with flux Size: W 0.10'' L 98'; width: 2.5mm, Length: 30M - 98ft - Large Size Desoldering Braid
Solder Remover wire Materials:The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
Wide range of use:The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
Price: $5.99 [New: In Stock (TOWOT US: 4.92 Point Based on 453 Customers)] [ : Fulfilled by Amazon][ : Free Shipping][ : Amazon Prime]
Quality materialsThe Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
Easy to use: Desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Extensive applications: The braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
Warranty :If you have any questions, please feel free to contact us at any time. Thank you!
EAN: 0779008426005 Price: $3.45 [New: In Stock (Amazon.com: 4.68 Point Based on 385 Customers)] [ : Fulfilled by Amazon][ : Free Shipping][ : Amazon Prime]
Oxide-free clean copper
Static free bobbins
Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
Manufactured under SPC guidelines
Designed to leave a residue that is environmentally safe
TY - GEN TI - MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue PB - MG Chemicals ET - Misc. KW - Desoldering Wicks AN - B008O9VLA2 SN - 0779008426005 U1 - https://lead.to/amazon/com/?op=ri&la=en&cu=&key=B008O9VLA2 U3 - https://www.amazon.com/dp/B008O9VLA2/ LB - $3.45 N1 - New Y2 - 2024/07/05 ER -
Price: $8.99 [New: In Stock (BANQUNA: 4.9 Point Based on 10 Customers)] [ : Fulfilled by Amazon][ : Free Shipping][ : Amazon Prime]
√ 「SYOKO Solder Wick」: .High-quality materials The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption
√ 「Braid Size」: w 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft
√ 「Easy to Use」: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering. place it over the area where you want to remove the solder and heat it up.
√ 「Wide Range Of Use」: The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
√ 「After Sales」: If you have any problem after receiving the solder wire, please feel free to contact us. We will reply at the first time!
Price: $5.99 [New: In Stock (BEEYUIHF: 4.83 Point Based on 104 Customers)] [ : Fulfilled by Amazon][ : Free Shipping][ : Amazon Prime]
BEEYUIHF Desoldering wick with flux Size: w 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft
Solder Remover wire Materials:The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
Solder wick Braid wide range of use: The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
TY - GEN TI - BEEYUIHF 3M/10ft 2.5mm Desoldering wick Braid, Solder wick Braid with Flux, No-clean Solder Remover wire Kit,Cable Remover Tool Solder Sucker,w 0.10'' L 9.8' (1 Piece 2.5mm 3m) PB - BEEYUIHF ET - Misc. KW - Welding Equipment & Accessories KW - Desoldering Wicks AN - B0CB3QGXR8 U1 - https://lead.to/amazon/com/?op=ri&la=en&cu=&key=B0CB3QGXR8 U3 - https://www.amazon.com/dp/B0CB3QGXR8/ LB - $5.99 N1 - New Y2 - 2024/07/05 ER -
KOTTO Solder Wick Braid with Flux No-Clean Desoldering Wick Removal Tool, Solder Sucker Wick Roll to Desolder PCB and Remove Solder for Electronics, 5 ft Length, 0.1 inch Width, 2 Pack Wick
Price: $5.99 [New: In Stock (F.Stop Labs: 4.88 Point Based on 440 Customers)] [ : Fulfilled by Amazon][ : Free Shipping][ : Amazon Prime]
Quicker wicking: This Solder wick can be used to remove the unwanted excess solder quickly and efficiently during the solder re-working process or remove some already soldered components. The added Flux gives a faster action and helps the surfaces to be heated and solder to flow, which significantly reduces the solder repair time.
Copper braids: The braid desoldering wicks are made of 100% copper wires with fine braids woven together, and have good thermal conductivity. Also using the solder braid will protect the delicate components or electronic circuit boards from damages during soldering/reworking/repairing.
Wick Application: The desoldering braid wicks are suitable for industry welding, lab work or home work, practical desoldering tools to clean a joint from excess solder and correct mistakes on small PCB boards, the desoldered components can be used again, bringing lots of convenience for your work.
Easy to use: Simply just place the soldering wick against the solder and place heated solder iron tip on it, the soldering wick absorbs the solder due to its high thermal conductivity. By this way, you can remove the solder from the PCB or any metal surface. Leaves slight flux residue that is non-conductive and non-corrosive so it requires no cleaning.
Packages include 2 pcs of no-clean solder wicks, each wick is 5 ft in length and 0.1 inch in width.
TY - GEN TI - KOTTO Solder Wick Braid with Flux No-Clean Desoldering Wick Removal Tool, Solder Sucker Wick Roll to Desolder PCB and Remove Solder for Electronics, 5 ft Length, 0.1 inch Width, 2 Pack Wick PB - KOTTO ET - Misc. KW - Desoldering Wicks AN - B0BYLCQY9W U1 - https://lead.to/amazon/com/?op=ri&la=en&cu=&key=B0BYLCQY9W U3 - https://www.amazon.com/dp/B0BYLCQY9W/ LB - $5.99 N1 - New Y2 - 2024/07/05 ER -
Flux Advantages: No-Clean,Low Residue,Stable Performance, Low Volatility, No Shelf Life, Low Smoke, No Irritating Odor,Rohs Compliant
Solder Wick With Flux: Good Wettability, Easily Removes Oxides From Soldering Surfaces, Low Residue, High Efficiency in Absorbing Excess Solder, Improving Work Efficiency
Durable And Corrosion-Resistant: Features Anti-Oxidation and Corrosion Resistance, Ensuring Solder Wick Maintains Stable Performance and Reliability Over Long-Term Use, Suitable for Various Soldering Needs
TY - GEN TI - Hakko FR301-03/P Portable Desoldering Tool with Precise Temperature Control °F /°C PY - 2018 DA - 2018/03/13 PB - American Hakko Products, Inc ET - Misc. KW - Welding Equipment & Accessories KW - Desoldering Wicks KW - Popular With Pros AN - B07BFVFMS9 U1 - https://lead.to/amazon/com/?op=ri&la=en&cu=&key=B07BFVFMS9 U3 - https://www.amazon.com/dp/B07BFVFMS9/ LB - $325.85 N1 - New Y2 - 2024/07/05 ER -