Lead2Amazon

【Creality Clog Poke】New 3D printer nozzle cleaning kit works much better than small needles and there is no need for cleaning filament either. Turn a half-hour repair into a 3-second poke! Must-have 3d printer tool!

【Clean Without Disassembling Hotend Needed】Poke down to remove the clogged filament and clean your extruder completely.

【Prolong Design】Diameter 1.5mm, length 210mm. Clean More thoroughly, easier to use. Perfect for any 1.75 mm Nozzle.

【How to Unclog】Remove the tube, heat the hotend to 200°C, then use the needle to clear any filament stuck in the hot-end and nozzle while it’s still hot.

【Portable Hanging Hole】Hanging hole design for easy storage.

【Built for 3D Printing Nozzle】The arrow tip of clog poke is designed to match the end shape of the nozzle, quickly clear the tube.

【Soft Rubber Grip】PP+TPR soft rubber material. Balanced softness and firmness for comfortable handling. Anti-slip bump design enhances grip and prevents slipping.

【Fine Workmanship and High Hardness】High-quality steel, wear-resistant and damage-resistant.

Hotend Silicone Sock 5pcs for QIDI Q1 Pro 3d printer

👍【Filament Storage Bags Kit】TIOPY Upgraded 3d Printer Filament Vacuum Sealer Kit including: filament sealed bags *10, reusable non-toxic desiccants*10, sealed bag clips*2.Filament sealed bags size: 30*34CM(11.8*13.4inch). One kit 22pcs in total, which can satisfy storing either 10 single filament spool at the same time.

👍【Upgraded Air Valve & Long-lasting Sealing】The upgraded air valve is easier to get the air out, which can be used hand pump in just seconds, you can seal your filament storage bags easily, quickly and efficiently. And our Filament Storage bags apply bilateral double zipper sealer & embossed design, makes them more dust proof, moisture-proof & water proof. Each bag is matched with a reusable desiccant to double protect the filament effect.

👍【High Quality Materials】Our vacuum bags are made of food grade PA+PE composite material, specially designed for 3D printer filament, also used to store food, pet food stuff, household stuff, cloth, cameras, lenses, watches and jewellery.

👍【Convenient Management】There is a label on the bags to record the material and the sealing date of filamen. And transparent vacuum bags enable you to have a quick view of the humidity level of your filaments without opening the bags. Applicable to 1kg/0.5kg/200g*4 bundle printing filament.

👍【Easy To Use】Put the spool into the bag, seal it with a sealing clip, and then use a hand pump to remove excess air. 【Note】The blue label cannot be torn off, so as not to affect the sealing state.Please use your finger to smooth out the air bubbles in the air valve after vacuuming to avoid affecting the vacuum effect due to air bubbles.

DIY Enclosure: The exterior color can be customized according to your needs, meeting personalized requirements and showcasing a unique style.

Stable Temperature: Optimizes heat dissipation to maintain a stable internal temperature, enhancing print quality and supporting high-temperature materials like ASA and PC.

Noise Reduction: Reduces printing noise from 65 dB to 55 dB, making the printer quieter and more suitable for home and office environments.

Increased Safety: Prevents pets and children from touching hot components and protects internal parts from dust accumulation.

Isolate Odors: Effectively isolates and contains odors produced during printing, especially with materials like ABS or ASA, creating a more pleasant printing environment.

【Double Sided Holographic Effects】New holograms patterns for rainbow circles and kaleidoscope can give more creativity to your 3D printing. 2 In 1 smooth PEK steel plate provides versatility and convenience for 3D printing enthusiasts.

【Better Adhesion】The excellent adhesion base on selecting "Smooth PEI Plate/High Temp Plate" on your slice and clean up the spring steel sheet before each using. Beside, please use our recommend filaments, PETG: 70~90℃; TPU: 20~40℃; PLA: 60~65℃; ABS: 90~100℃.

【Effortless Removal】IdeaFormer-3D build plate can repeated using. The flexible steel plate allows for bending to remove the prints when the heated bed cools down to 35℃ or lower. Please don't use any other tools to take off the models, otherwise it will damage the holographic build plate.

【How to Maintain】You can wipe the build palte with a wet paper towel or IPA before using the plate, otherwise the residue will affect the adhesion. The smooth PEK build plate is considered a consumable part, the holographic patterns are not permanent.

【Package Included】1 x Smooth PEF build plate (rainbow circles+kaleidoscope patterns). Compatible for Bambu Lab X1C/X1/X1E/P1P/P1S/A1.

FLASHFORGE Adventurer 5M /Pro 3D Printer Camera Kit for Real-time and Remote Monitoring, Compatible with Flash Maker App

High Thermal Conductivity: Super thermal conductivity performance,thermal conductivity is 12W/m.k.

Safe and non-conductive: It is made of eco-friendly silicone materials without adding any preservatives or metal particles,and has high insulation and corrosion resistance.

Easy to apply: Easy to applly,can easily fill tiny thermal conductive gaps and improve thermal conductivity efficiency.

Use with confidence: Comply with environmental protection requirements such as RoHS,HF,REACH,it is safe and has no odor.

Excellent temperature performance: It is not easy to dry at high temperatures and does not solidify at low temperature.It can work in the environment of -50--2500 for a long time

Compatible Models: Silicone socks kit is compatible with Bambu Lab A1 Mini 3D printer

High quality materials：The silicone sock is made of high-quality silicone, can withstand high temperatures, and will not deform after long-term use.

Effective protection:It can be working up to 300C degree. keeping it at a stable temperature during the printing process, effectively protecting the cleanliness around the heating block and nozzle, and preventing consumables from sticking to the hot end

Easy to install:When replacing the silicone sock, please ensure that the hot end has completely cooled down to avoid burning your fingers during the replacement process

Package include:2 pcs silicone socks

🐼【LED Upgrade Kit for Bambu Printers】 Panda Lux LED light bar is compatible with Bambu Lab P1S P1P X1C X1E 3D Printers. It is powered by the original light bar connector and can be controlled by the original screen. And it won’t interfere with the lidar function.

🐼【Effortless Magnetic Installation】BIQU Panda Lux LED lightening strip features an effortless magnetic installation without any tools. It is directly mounted behind the front panel so the light won’t be harsh and is friendly for your eyes.

🐼【Long Service Life】 Its quality aluminum alloy housing guarantees efficient heat dissipation thus extending the LED light strip’s lifespan up to 36,000 hours.

🐼【Illuminate Your Prints with Clarity】Significantly enhance the lighting in the print area, allowing you to monitor the printing process and identify any issues quickly and easily.

🐼【Customer Service】Please feel free to ask us for help directly through Amazon if you have any problem with panda lux, BIQU service team are always ready to help.

【Official Hotend Kit for K1 Series】This K1 Series Ceramic Heating Block Kit is compatible with Creality K1/K1 Max/K1C for high-speed printing. 360° surround ceramic heater improves heating efficiency, more uniform heating and faster heat transfer. It can be heated to 200°C in 40 seconds.

【Supports Up to 600 mm/s High-speed Printing】Enlarged nozzle chamber, achieving a maximum flow rate of up to 32 mm³/s, and supporting high-speed printing at 600 mm/s.

【Easy to install】The nozzle, heat block, and heat sink adopt an all-metal integrated design, facilitating quick disassembly and convenient replacement.

【Upgrade Material Kit】The heat break is made of titanium alloy, which can reduce heat conduction. The nozzle is composed of copper alloy and hardened steel, supporting the printing of various filaments such as PLA, ABS, PETG, TPU, PP, PC, PLA-CF, PA-CF, PET-CF.

【After Sales Support】We provide professional after-sales service. Please kindly contact us(seller) via "ask a question" find us directly cause our customer service will respond to you within 24 hours no matter what the question.