Lead2Amazon

Bottom Cover: Silicone cover prevents the bottom of the water bottle pouch from falling out.Protects the bottom of your water bottle pouchCheaper than buying a new water bottle pouch, you can increase the durability with this.Note: Water bottle pouch not included

Installation Method: 1. Turn the bottom cover inside out2. Attach the double-sided tape (included) to the side of the water bottle pouch3. Align the bottom cover and the bottom of the water bottle pouch4. Put the bottom cover back5. Press down the top and push down on the double-sided tapeThere may be a gap under the cover due to individual differences in the water bottle pouchIn that case, please reapply the double-sided tape on the top of the double-sided tape.Double paste the double-sided tape to fill gaps

Silicone: Made of high quality silicone material, it is wear-resistant, strong and durable, and it is easy to clean so it can be used for a long time.

Double-Sided Tape Included: Comes with double-sided tape of strong acrylic rubberThe bottom cover stays in place with double-sided tape.

Wide Compatibility: Fits the bottom of most Thermos and Zojirushi bottle pouchesSizes 11.8 , 16.9, 20.3 fl oz (0.35, 0.5, 0.6 L): Diameter 3.0 in (7.5 cm), Height 1.8 in (4.5 cm); Sizes 27.1, 33.8 fl oz (0.8, 1 L): Diameter 3.5 in (9 cm), Height 1.8 in (4.5 cm); Size 50.7 fl oz (1.5 L): Diameter 3.9 in (10 cm), Height 1.8 in (4.5 cm)

Compatible plastic bottle size (capacity): Outer diameter 2.6 - 2.9 inches (66 - 73 mm), Height 6.8 - 8.8 inches (173 - 223 mm), Capacity 16.9 - 23.6 fl oz (500 - 600 ml) cylindrical plastic

Note: Depending on the shape and size, the product may not be able to store it or it may not stop securely in the holder

Materials: Main unit: Interior/Exterior: Stainless steel (acrylic resin coating), Cover: Polypropylene (heat-resistant temperature up to 212°F/100°C), Jabbalah part/Handle: Thermoplastic elastomer, Clasp: Stainless steel, Inner and bottom non-slip silicone rubber

Country of Origin: China

Product Size: Approx. 4.0 x 3.4 x 6.6 inches (103 x 87 x 167 mm) (not including handle and jabbal)

Department Name: Unisex Youth

SUITABLE USES AND ENVIRONMENTS FOR YETI STANDARD CORSTER 2.0: Standard 12 oz cans, long neck bottles, tailgate parties, BBQ competitions, temperatures above 100 degrees Fahrenheit. Retention of can may vary depending on the shape of the can and bottle

Load-locking gasket Quarter turn for easy sealing

The corster is double wall vacuum insulated. Keeps drinks cold

YETI thick steel makes this drinkware sturdy and durable. Duracoat paint colors are great for outdoor use and will not crack or chip

YETI Standard Corster 2.0 is dishwasher safe. Size: 3" x 4.25"

This can holder fits 11.8-fluid ounce (350 ml) cans perfectly and keeps drinks tasting fresh!

In 5 minutes, -1 ℃! Chill beer or can juice into a kink / Electric rotational cooling using ice and salt In just 5 minutes, you can cool it under freezing temperatures that you can't drink by simply chilling it in the fridge! No need to worry about bubbles spilling when opening the can. Can be used for beer, as well as soft drinks. Recommended for home drinks, home parties, outdoor activities, etc

Great for spring, summer, autumn, and winter. Can be used for a variety of occasions such as flower viewing, outdoor activities, year-end parties, etc

Estimated cooling: At room temperature (approx. 44°F (20°C)/ after 3 minutes: 5 minutes of 5 minutes, -1°C); *Depending on the environment temperature and the type of beverage. Add salt to the ice to lower the temperature to 32°F (0°C). Only for cans under 11.8 fl oz (350 ml). Not for use with 16.9 fl oz (500 ml) cans or bottles

How to Use: 1. Put ice and salt into the main body. 2. Set a can drink (11.8 fl oz (350 ml) or less) into the main unit. 3. Rotary cooling starts with the power switch on

Department Name: Unisex Adult

Product Size (Approx.): Outer Diameter 3.1 x Height 4.8 inches (78 x 12

Compatible Cans: 11.8 fl oz (350 ml) cans

Materials: Main unit: Interior/Exterior: Stainless steel (acrylic resin coating), Rubber Grip: Silicone rubber

Country of Origin: China

Size: Diameter 3.4 inches (8.6 cm) x Height 6.7 inches (17 cm) / Cold Insulating PET Bottle Cover 16.9 fl oz (500 ml)

Material: Outer material: PVC; Handle: Polypropylene; Lining: Vapor-deposited aluminum film

Accessories: Shoulder belt; Country of Origin: China

The inside is made of vapor-deposited aluminum material that has a cooling effect

Size (W x D x H): Approx. 3.7 x 3.3 x 8.1 inches (9.5 x 8.5 x 20.5 cm).

Weight: Main unit (approx.): 10.2 oz (290 g).

Materials: Body: Stainless steel (outer surface: polyester powder coating); Cover: Polypropylene (heat resistance temperature: 212 °F (100 °C); Rubber Base Protector: Silicone rubber (heat resistance temperature: 356 °F (180 °C)).

Country of origin: China.

Can be used with both 16.9 fl oz (500 ml) and 20.3 fl oz (600 ml).

Authentic Cold Retention: The RICHAR plastic bottle holder is made of double-sided aluminum for a long time. You can enjoy a cold drink even on hot summer days and stay hydrated on the go

Condensation Protection: The condensation resistant design prevents condensation on the surface of the plastic bottle, so you don't have to worry about getting your bag or belongings. This makes it more convenient and comfortable to carry

(Heat Retention) This plastic bottle cover not only keeps you cold, but also provides heat retention. Keep your hot drinks hot for hours in cold weather and enjoy your hot beverage anytime

(Compatible with up to 22.0 fl oz (650 ml)) Compatible with water bottles of up to 22.0 fl oz (650 ml); Fits bottles of various sizes

Size (W x D x H): 3.9 x 2.2 x 3.5 inches (10 x 5.5

Material: Polypropylene

Country of Manufacture: Japan

Heat Resistance: Up to 282°F (120°C)

Note: The paper pack in the holder should be less than 2 x 2.8 inches (5 x 7.1 cm)