Lead2Amazon

Screw mount wall adapter plate for 3/8" 1/4" camera video wearable camera action cam photography accessories CCTV security camera surveillance camera sensor light acoustic instrument dowel screw spigot microphone stand LED lighting diffuser DIY device accessories It can be fixed on walls and ceilings and slopes where screws can be tightened. With a compact size of 1.6 inches (4 cm) in diameter, it can be used in places

The screw hole size in the middle of the fixing plate is 3/8" cut and is 1/4" if you insert the included screw diameter conversion adapter screw (converter). By using adapter screws (sold separately) (1/4-1/4, 1/4-3/8, 3/8-3/8; Male-Male, Male-Female) etc., it can be used with free-head heads, ball head, tilt, magic arm, tilt angle adapters, and more to expand the range of photographic equipment in your studio, or sound equipment regardless of location

When installing the bracket on the base, you can set the position of the mounting position on the horizontal surface of the board, such as the top board, and temporarily secure the bracket, mark the places you tighten the screws, and open the bottom hole (holes) beforehand with an electric drill, impact, or cone (cling), etc. to make the screw tightening. Drilling a hole before screwing or screwing it to prevent cracking of plates and make the finish look beautiful. Adjust the cone to always be vertical, realizing that the hole is straight

Product Size: Diameter 1.6 inches (40 mm), Height 0.4 inches (10 mm), Material: Aluminum Alloy; Weight: 0.6 oz (16 g); Screw Length: 5.5 inches (14 cm) (can be fixed or detached with a Phillips screwdriver); Color: Basic Black (Black, Solid) *This product is not a magnetic stand (does not require charging or battery replacement)

This product requires measuring tools, measuring tools, such as cones, screwdrivers (plus), stepladders, and pedestal installations, equipment and installation locations, and other measuring tools such as measuring and positioning of the installation location, and temporarily fixed, but tools, writing tools, and measuring equipment are not included. Please check the set contents of the product before purchasing

Product Introduction: DSLR, SLR camera, wearable camera, camera lens, hood, filter, free-head head, double ball head head head head (magic arm head), flashgun, light stand, smartphone, smartphone holder, bracket holder, tripod, clamp holder, GoPro mount conversion tripod adapter, webcam, camcorder, video monitor, LCD display, level (leveler), extension adapter, handheld triaxis gimbal stabilizer grip. Handles, copy stands, etc. The photographic accessories are a sample of the product using examples. Not included

Depending on your smartphone (smartphone), tablet PC, computer or other device's monitor settings, lighting, LED light, color temperature difference, the color of the product shown in the product images may differ slightly from the actual product. Thank you for your understanding. Keep out of reach of infants and children when not in use

Adjustable Angle: The head can be rotated 360 degrees, making it very convenient for shooting in normal and difficult structures. It has a load capacity of 2.2 lbs (1 kg), with 1/4 screw, widely used for camera/HTC VIVE, etc

【High Quality Material】Made of high quality metal material, black plating surface, high stability, durable and durable to use for a long time

【Product Features】The interior has an anti-slip design to protect your device and reduce scratches, but also easy to install and carry. Can be used alone

【With 1/4 Screw】Compatible with most DSLR camcorders, studio background cameras. It can be firmly fixed and is ideal for preventing hand shaking

Wide range of applications: You can use the compact camera instead of a tripod, securing small monitors such as a baby monitor, or setting up a dash camera. Capture videos while traveling and capture impressive videos. Great for shooting in the studio, at home, outdoors, recording, and more

Camera Video Shooting Support 1/4" & 3/8" Screw Hole Multi-Purpose Accessory Tripod Mount Extension Bracket

(Can be clipped anywhere) The camera clamp can be installed in a place where a tripod cannot be placed, and it can also be used to take videos while on the move, making it ideal for preventing hand shake and allowing you to capture powerful videos. Great for shooting in the studio, at home, outdoors, recording, and more

Wide range of usage: The shooting clamp is equipped with a 1/4 screw, allowing you to connect your SLR camera, GoPro camera, monitor, security camera, microphone, speaker, etc

(Perfect Photos) The camera mount can be firmly fixed to any holder with a width of 1.6 inches (40 mm) or less (40 mm) or less, so it can be used in a variety of places

(Load Capacity: 6.6 lbs (3 kg); The camera clamp is made of reinforced aluminum alloy for excellent stability and durability. Load Capacity: Approx. 6.6 lbs (3 kg). Rubber rubber and anti-slip, protect pinched areas from scratches

Product Contents: 1 x small shooting clamp, 1 x head head, Material: Aluminum alloy

3-LEVEL OPENING ANGLE: The XXZU light stand tripod can extend each leg up to 76cm and can be adjusted to 3 different levels of openning angle, providing the best angle and height for different shooting scenes. This feature allows the tripod to be stabilized by individually adjusting the angle and length of each leg when shooting in high and low terrain. When you adjust the angle of the strobe stand legs up and down, you will hear a "click" sound every time you reach the grooves of each level. The maximum leg opening angle is 83°, and the tripod can be adjusted to this level for the highest stability

360° Rotation Adjustment & Vertical Shooting: The camera tripod has a 360° rotatable ball head that allows you to adjust the position of the camera freely with the knob on the side. It is not only equipped with 360° rotation in both horizontal and vertical directions, but it also has a 90° angle adjustment function. It comes with a dual-purpose clip. When used in the front, you can use it as a smartphone clip or a camera stand on the back for attaching a small camera. This is a smartphone tripod that is indispensable for travel

Reverse Folding Storage Design & Storage Bag Included: The reverse folding design allows for a total weight of only 27.9 oz (789.5 g), making it smaller than a regular light stand and convenient to carry. After storage, it can be easily stored in the storage bag. The shooting light stand is made of aluminum alloy which is highly durable and lightweight, the surface is smooth, stylish and wear-resistant. The bottom base is a sturdy tripod structure, the 25mm diameter tube is thicker than the normal stand, and the maximum load capacity is 5kg. When using outdoors, hang the weight on the windproof hook to prevent it from falling over even in the wind

5 Levels Height Adjustment & Maximum Height 82.7 inches (210 cm): Lever lock allows the light tripod to be stretched from 16.9 to 82.7 inches (43 to 210 cm) to 5 levels, allowing you to shoot a wide range of pictures. Especially for group shooting or working in the studio, these three legs provide excellent stability. It comes with a high quality illumination light for better shooting effect

Application: This lighting stand has 1/4" screw and 5/8" stud on the end for ring flashlights, umbrellas, LED lights, smartphone holders, head heads, reflectors, softboxes, digital cameras, etc. There is a 1/4" hole and cold shoe on the side of the ball head and clip to attach shooting accessories such as shooting lamps, microphones, etc. It can be used for live broadcasting, photo shooting, video shooting, advertising, product shooting, etc

Product Specifications: Camera fixed plate x 1, diameter 7cm, plate center screw hole is 3/8 inch and can be used with a variety of photographic and audio equipment using the included screw diameter conversion adapter

Material: The tripod quick shoe is made of high precision CNC machined aluminum alloy, very lightweight, good corrosion resistance and durability, good stability performance, can be used for a long time, can be used in a variety of indoor and outdoor environments

Easy to install: When fixing the bracket to the base, screw it on the horizontal surface, mark the screws on the screw stopper, then drill a hole with a tool such as a drill, impact drill, or an outer to tighten the screws smoothly

WIDE APPLICATION: Versatile adapter is compatible with commercially available photographic and acoustic equipment. Can also be used with single heads, ball heads, tilt magic arms, tilt angle adapters, etc

Aluminum alloy material, CNC oxidation process, good workmanship, sturdy and durable

The extension rod with 2 sections, the length is adjustable from 25‑41cm / 9.8‑16.1in to meet your different needs

The bottom has a 1/4" screw thread for mounting on a tripod or bracket

The extension rod is designed to extend the height of the tripod so it is easy to install and use

You can switch between 3/8" screw interface and 1/4" screw interface freely, no need to change the screws

360 Degree Rotating Panoramic Ball Head: The free ball head can be rotated 360 degrees, but it can also be used for panoramic photography. You can adjust the angle of the camera by loosening the large knob in the middle By tightening the knob, you can secure your monitor and other accessories in the perfect position. Release the screw knob for panoramic shooting

[Versatility] Can be joined with products that have 1/4" screw, such as camera gauges that can be attached to photography accessories or broadcast equipment. By attaching an LED light, tripod and monitor to extend the shooting range. The cold-shoe mount is compatible with a variety of photographic equipment

Compact and Lightweight: Outer dimensions are 0.9 inches (24 mm) diameter x 1.4 inches (35 mm). Small and compact with only 0.9 oz (24 g) (including cold shoe mount), and a precise design that makes it easy to store. A free-head head that is perfect for mounting small digital cameras and surveillance cameras. Made of sturdy aluminum alloy and stainless steel, sturdy, durable and corrosion resistant. If you have any questions or concerns, we will help you within 24 hours

(Manufacturer's Warranty) The top of the head is equipped with a rubber pad, which prevents scratches when installing equipment, and can be firmly secured. We strive to ensure the quality of our products, but if you have any defects, please feel free to contact us via email. We will respond within 24 hours

Tripod Leveling Base & 8° Up/Down Tilt: The Ulanzi Horizontal Adjustable Pan Head TT37 features a 12°/+12° tilt design to provide a more stable and flexible shooting angle in addition to 360° pan motion. A tool for flattening panoramic systems, when combined with a tripod for landscape photography, it allows for easy and accurate level adjustment especially for uneven terrestrial shooting

Sturdy and Durable: Made with all-metal construction, the main body material is T 6061 aviation aluminum material, which is lightweight, solid, and easy to carry. CNC machining, surface hard anodized, resists wear and corrosion Load up to 10kg, suitable for outdoor shooting, easy to carry

【Built-in Level】 Integrated level allows you to instantly and easily align your camera to a horizontal line, allowing you to level your tripod or light stand smoothly and accurately

【Wide Compatibility】 3/8" mounting screw and 3/8" tripod socket can be used with a variety of photo devices. The 3/8" screw on the top allows you to connect the tripod head and video head to the quick release plate. With the 3/8" screw on the bottom and 1/4" to 3/8" adapter, you can attach the leveling base to any kind of tripod, monopod, or slider

[Manufacturer's Warranty] Our products have a 12 month warranty and we will provide replacement services for the case of initial defects or natural defects while in use

Product Name: Magnetic fixed car exercise camera base

Construction: Strong magnet, rubber, 1/4" screw

【1/4" Screw】Standard 1/4" screw can be connected to a variety of photographic equipment

(High load) Maximum load capacity of approx. 22.0 lbs (10 kg). Built-in multiple neodymium iron boron strong magnets are arranged at NS intervals to produce powerful magnetic suction

Coated Rubber: The outer layer of the product is wrapped in rubber, so it will not damage the painted surface when adhering to the vehicle