Lead2Amazon

Bass reflex subwoofer for 200W bass sound with powerful 160mm drivers Please check the manufacturer's website for compatibility

The speaker unit adopts a signa type magnetic circuit. Powerful bass playback with less distortion

Wireless connection that does not require wire speaker cables, allowing you to freely layout

Just turn on and it will automatically connect to your sound bar/home theater system. Easy to set up

The most compact size in the Ambio series (W x D x H): Approx. 27.6 x 3.9 x 2.6 inches (70 x 10 x 6.5 cm)

However, the sound bar alone provides 7.1.4 ch for a confident immersive feel

Equipped with 4 full-range drivers and 2 long throw woofers

Ambio's unique algorithm automatically adjusts sound to match the playback content from music, movies, news, neutrals and sports genres

Ambio technology allows you to upmix stereo and 5.1 ch content into 3D sound

Precision automatic room calibration

Note: The sound bar requires a home network environment

A BETTER SOUND EXPERIENCE: The OXS Thunder Lite is equipped with two full-range drivers and bath tubes, providing you with the highest quality crystal clear sound. Two high-capacity bass pipes deliver vibrant, accurate bass that reproduce the immersive audio feast

Virtual Surround Sound: Thunder Lite one-button game mode is cleverly tuned to provide sound with a wider frequency range, providing an exciting and competitive gaming experience

COMPACT AND SLIM DESIGN: The Thunder Lite has a low profile design that allows it to be easily tucked under a variety of PCs and displays while minimizing space

Additional Connection Options: Optical, HDMI-ARC, AUX or 3.5mm stereo audio to connect this sound bar to your device. Bluetooth allows you to stream music wirelessly from your phone

Bus Pipe Design: The Thunder Lite combines the most advanced audio processing tools with the original sound chamber design that incorporates bass pipe low frequency enhancement. This design is further enhanced through computer simulation and hydrodynamic optimization

Subwoofer with large diameter 11.8 inches (30 cm) diameter long stroke woofer

Easy wired connection, set up your TV speaker close to you!

Output from close to you so you can hear the TV volume smaller than usual

AM/FM (wide FM compatible) with radio function

Alarm (wake up) / sleep (automatic power off) function

This is a 5.1-inch (13 cm) woofer Z-Livorno (2) DIY passive subwoofer kit. A separate amplifier is required to drive passive subwoofer (this is not an active subwoofer with built-in amplifier. )

This passive subwoofer speaker kit is sold as mono. Therefore, you can place it in the center and use it as a 2.1 ch subwoofer, or you can use it as a professional 2.2 ch subwoofer (if so, buy two)

If you want to use it on the left or right side, you can place the small bookshelf speaker on the top of the speaker stand. Commercially available small bookshelf speakers and subwoofer amplifiers allow for low-frequency playback up to 35 Hz. This product is compatible with the Z1-Livorno, Z601-Modena, Z600-Cannonball100, etc

18mm pre-cut MDF must be glued together and wired with speaker units. Includes terminals, parts, and instructions for easy assembly for beginners. Enclosures are pre-loaded with duct blocking wood to change sealed and bass reflectors. (Acoustic absorbing material and bass reflectors must be purchased separately.)

Accessories include precision cut 18mm thick MDF, 13cm woofer Z-Livorno, terminal, speaker cable, internal wiring and screws. Size (W x D x H): 9.1 x 11.6 x 23.4 inches (230 x 295 x 595 mm) (excluding protrusions), volume: Approx. 6.1 gal (29 L), Weight: Approx. 22.0 lbs (1

Repair edge is made of rubber, flexible, anti-aging and durable

Outer Diameter: 225mm / 9"

Exquisite craft, wear resistance, help you get great audio effect for bass

Easy to follow step-by-step installation instructions, free technical support, easy to install

The rubber edge is perfect for speaker repair and DIY

Enclo-wear for a rich rigidity playback with Bluetooth V5.0. Transparent internal wiring. Adjustment function to expand the range of settings

Amplifier Power: 40 W x 2 (woofer) 10 W x 2 (toya)

Input: (Digital) USB/Optical /Bluetooth (Analog) RCA /PC

Size (W x D x H): 5.5 x 9.4 x 10.0 inches (140 x 240 x 255 mm) (including protrusions), 10.9 lbs (4.8 kg) (1

Accessories: Remote control, power cable, left and right speaker connection cable, USB cable, optical cable, RCA cable, urethane angle base

By connecting the SA-RS3S, the sound from the front sound bar is added to the sound from the backward for an immersive and realistic surround experience

2-way unit construction with woofer and tweeter Enjoy clearer and wider surround sound

Simply connect the power cord and you don't need to wire your speaker cables

Simply turn on and connect automatically to the target theater system. Easy to set up

Can be used on wall to create a highly flexible layout

These port tubes can be used to overcome situations, and have a beautiful appearance, low distortion, and excellent overall sound quality

These port tubes provide reliability, convenient installation, and simultaneous construction projects with a finished look

Entrance and exit ports in annoying turbulence that usually suffers from tubes, unproduced noise and low sound quality

Standard mounting holes allow this tube to be easily installed than any other

Speaker port tubes are used to improve the bass response