Lead2Amazon

【商品説明】トヨタ純正ドアスピーカーを社外品に付け替える際に使用するハーネスです

【取り付簡単】車両側の純正配線を傷めません

【セット内容】車用スピーカー変換ケーブル x2

[Contents]

Speaker conversion harness … 2

5P 車速コネクター：スズキ車にナビ製品を取り付ける場合、車速・リバース・パーキング用の5極コネクターを配線に変換できます。 バックラインは2極に分かれており、バックカメラなどの取り付けが容易です。スズキ 5ピンカプラー装着車に対応します。

20P オーディオハーネス： スズキ車側のオーディオハーネスのカプラーをオープンにするだけで、市販のオーディオ・ナビが取り付け可能です。バックアップ電源とアクセサリー電源を2極に分割し、ETCなどの取り付けを容易にしました。

【安心保証】この製品は12ヶ月の品質保証があります。

【セット内容】5P 車速コネクター ×1 、20P オーディオハーネス ×1 、配線説明書 ×1

This is the wiring for Honda Tweeters to add or transfer the tweeter to another location without cutting the wiring of your vehicle

Convenient wiring to easily replace your factory tweeter with an aftermarket tweeter

The factory tweeter is located on the door handle and the position of the installation is too low for enough effect. The original tweeter size is very small and volume is not suitable for car audio. The genuine tweeter will break when the volume is increased, so if you use this product to easily change it to an aftermarket tweeter (sold separately), you can improve the music environment in your car

Set of 2

A set of components necessary for installing commercial car audio and navigation on Honda vehicles

Can be installed without vehicle side processing

This product is compatible with different vehicles, so please be sure to check the compatibility of this product. Cannot be used with vehicles equipped with dedicated audio

Set Contents:

Bracket... 1, 2DIN Conversion Panel... 1, Gap Filler Tape... 1, Audio Harness (24P) Steering Remote Control Connection Cord... 1, Antenna Conversion Cord (2P)... 1, Screw (for brackets) 8, Tapping (for brackets) 2, Flange Nut... 1

1. Product use: 5-pin speed-connector: Aftermarket navigation products for Suzuki cars, Riva-Suba-King, and Spi-D connectors. This terminal is used to connect the commercially available ODIO Navigation to 20 BINOHA NESSUZUKI vehicles

2. Compatible models: Most Suzuki cars are ok, Suzuki Jimney Everyday Wagon/Everyday Swift Swift Sports Hustler

3. Product Contents: 5P car speed coupler x 1, 20P audio wire harness x 1

4. Easy to install: Just open the audio harness coupler on the side of the vehicle, install the external navigation, then split the backup accessory power into the pole and install the ETC. Excludes vehicles equipped with BOSE audio system *Except vehicles equipped with audio and manufacturer navigation systems

5. Quality assurance: This product has a 24 month quality guarantee

For installing commercial ATOTO navigation systems and audio decks. Suzuki Honda Mazda Mitsubishi Car Audio Harness 20 P)

Car Antenna, Steering Wiring, Radio Antenna Conversion Cord Included Compatible with ATOTO A6 PF/ S8 / F7 / A6 KL Car Audio

If you want to install audio but handling the terminals is very troubles... you don't have to worry about how you can do it successfully. No need to deal with gibboshi terminals. Easy to install just plug it in. Coupler connections allow you to connect messy wires neatly, and can also be used to reduce contact issues caused by vibration during driving

The included electric tap is securely connected to the device to prevent wiring from shaking while driving. It is very troublesome to remove the navigation system again when it comes to contact with bad contacts, or removing the wire. (We have attached the tag in Japanese to prevent mistakes. )

Also, if you do not need it, simply remove it and it will be back again. No wiring is required, so you may need to take it out in the future. You may connect another car audio to another car audio. No need to worry about that

ATOTO Compatible Compatible Audio Please check compatibility chart. Many compatible models Compatible with ATOTO A6 PF/S8/F7/A6 KL Car Audio

The wires are attached with Japanese tags to prevent mistakes

【対応車種】トヨタ

【取り付簡単】本製品は車両側4ピンコネクタにカプラーオンで簡単取付け、配線工事は不要です。

【セット内容】配線×8、コネクタ×2 、ケーブルタイx2 、取扱説明書x1

【10P/6P オーディオハーネス】トヨタ・ダイハツ車の市販カーナビオーディオデッキの取付用。

【5P 車速配線カプラー】トヨタ・ダイハツ・スズキ車への市販カーナビゲーション取付用。

Useful for adding subwoofers, tweeters and more