Lead2Amazon

Desktop PC Memory DDR4-3200 (PC4-25600) / CL22 16GB (2 Pack) (32GB)

1.2V low power consumption / JEDEC standards

100% tested on key DDR4 motherboards Shipped after validating stability, durability and compatibility

Lifetime warranty to ensure the technical support and service of silicone power

Reliable full domestic support

The Hanye HE70 PCIe NVMe M.2 2280 Internal SSD features a durable 3D NAND TLC and PCI Express 4.0x4 interface for durability and a wide bandwidth of PCIe Gen4x4 for faster data transfer

For high-performance gaming computers and PS5 / new PS5 models; Equipped with aluminum heatsink for improved heat dissipation. Effectively promotes heat dissipation even in limited space of PS5 and prevents the game software from ending or decreasing transfer speeds

Sequential Read (Max): 7450MB/s, Sequential Write (Max): 6700MB/s *Read / write speed may vary depending on host device, interface, usage conditions, and other conditions

Operating temperature range: 0~70℃, Storage temperature range: -45~95℃, Working voltage = 3.3V ±5%; External dimensions (mm): SSD body 80.0±0.15 x 22.0±0.15 x 2.05±0.08; Includes heatsink 80.0±0.15 x 23.3±0.15 8.5±0 .35;

Warranty: Reliable domestic support and manufacturer warranty The warranty is valid for five years from the date of your first purchase or the date it reaches earlier after the maximum number of written bytes listed on the product data sheet (instruction manual). When attaching to a PS5, please make sure to install the spacer included with the PS5 in a hole marked "80" before tightening the screws. If the spacer is not installed or too tight the screws may cause damage to the M.2 SSD body. When installing an SSD into an M.2 slot such as a PS5 or PC, it may cause the heat sink to slide out. Hold the circuit board at the end of the SSD and push it into the M.2 slot. This product does not include screws to secure M.2 SSD to the motherboard

Flagship SSD for gamers and creators seeking performance Adopting next-generation technology, it brings new possibilities for high-load processing and gaming when creating content

Maximum Transfer Speed: Read: 7,300 MB/s, Write: 6,400 MB/s

Interface / Form Factor: NVMe 1.4 (PCIe Gen4.0 x 4) / M.2 Type2280

Management Software Supported: You can check and tune the SSD status with the SSD Utility. *Separate software download is required

Equipped with Japanese Memory & a 5 year long warranty: Equipped with a Japanese BiCS FLASH memory that uses a proprietary technology from KIOXIA. However, if the "remaining percentage of life" is zero, the warranty period will be ended. Products purchased from an authorized dealer (Buffalo Direct) may not be covered depending on the condition of the product distribution and storage. ※We do not guarantee the operation of an external case

Interface: PCIe Gen3x4

Reading: up to 2200 MB/s, Write: up to 1600 MB/s, TBW: 300

NVMe 1.3 Compatible

Reinforced RAID engine for data retention

Reliable 5 year warranty and domestic support. This product is guaranteed against use within the TBW value (5 years) and TBW value (300TB). See description below for additional warranty regulations

M.2 2280

512GB

Compatible with NVMe 1.3 It uses the latest SSD controller technology to support host memory buffer (HMB) to increase performance levels and reduce cost and power consumption

PS1461 Japanese Authorized Distributor Product

The successor to the popular Smart Standard series. The low-profile flat cable and a quieter 120mm fan have been improved to improve performance and stability as a basic model

80PLUS Standard Certified and designed to not sacrifice conversion efficiency

Equipped with a 4.7 inch (120 mm) quiet fan that reduces the temperature inside of the power supply. A new fan with less noise than previous models, providing stability and quietness

Supports Intel C6/C7 state, increases system power efficiency and energy saving

Aluminum low profile heat spreader for heat dissipation and slim style

Compatible with 8th Generation to 13th Generation Intel Core and AMD Ryzen 1000 to 5000 Series Desktop CPUs

Supports Intel XMP 2.0 for easy performance recovery

3,200 MT/s – 1.5x data rate of DDR4-2133

Downclocking is possible for systems that only support 2,933 or 2,666 MT/s

HP FX700 SSD: The HP FX700 Series M.2 SSD is equipped with the latest Gen 4x4 NVMe controller and 3D QLC NAND for dramatically faster reading and writing data, providing ultra-fast and stable performance. From game and application loading time to streaming and capturing the whole system is significantly more responsive

Super Fast Read and Writing Speed: Up to 7200MB/s reading speed and 6200MB/s write speed to improve the workflow of high performance desktop and laptop, making it ideal for the fastest power users on the market. The transfer speed may vary depending on the host device, interface, usage conditions, and other conditions

PMIC Power Management & Graphene Heat Dissipation Sheet: This product is equipped with a composite power supply IC (PMIC) for improved power distribution and improved power saving performance, which can effectively extend the life of the SSD. It also features a thin (0.5mm) graphene aluminum heat spreader with superior heat dissipation capabilities to prevent the drive from overheating for maximum performance

【Acronis Software Provided Free】Acronis software is world-renowned backup software, so anyone can easily backup data on their computer. No need to reinstall OS or software when replacing SSD. We will provide free to users of HP SSD series products

5 Year Warranty: The HP FX700 series product comes with a 5 year warranty (Japan only) and if you feel a defect, please contact the seller with your order history → order information (content) → seller (if there is external damage, we are not covered under the warranty )

VD8560 Japanese Authorized Distributor Product

Equipped with an Ada Lovelace architecture mid-range GPU "GeForce RTX 4060" which is equipped with a 3072 unit CUDA core

Equipped with high speed GDDR6 memory, the enhanced Tensor core provides powerful AI algorithms and real-time lay tracing that depicts real light sources, reflections and shadows from RT core, giving you a new level of realism and immersive feel in gaming

Equipped with two proven "TORX FAN4.0" which allows wind to flow into the heat sink and keep graphics cards cooler

1 x HDMI 2.1a and 3 x DisplayPort 1.4a support up to 4 screen outputs

QUALITY GUARANTEED: Our thermal paste packaging design has been changed several times, but the composition chemical formula remains unchanged. That's why MX paste maintains high quality

SUPERIOR PERFORMANCE: ARCTIC MX-4 thermal paste is made from carbon particles, ensuring extremely high thermal conductivity. This allows heat from the CPU/GPU to be dissipated quickly and efficiently

SAFE TO USE: The MX-4 uses no metal to transmit electricity, eliminating the risk of short circuit and further protecting your CPU and VGA card

DURABLE: As opposed to the thermal compounds of metal and silicone, the MX-4 will not damage over time. Once applied, it does not need to be reattached (lasts at least 8 years)

EASY TO APPLY: Ideal consistency, the MX-4 is easy to use even for beginners

Maximum Transfer Speed: 7,450 MB/s Read, 6,900 MB/s Write

Random Performance: 22,000 IOPS Write 80,000 IOPS

Interface: NVMe 2.0 (PCIe Gen 4.0 x4)

Form Factor: M.2 (Type 2280)

5 years/TBW 2,400 TB