0 Residue: FoundGo hot knife gives you a silky smooth cut feel. Our hot cutter cuts through foam and cloth smoothly, leaving no residue
(16 Temperature Levels) With 250 W of power, the hot cutter heats up to 142°F (600°C) in only 5 to 8 seconds. Total 16 positions, adjustable from 300 degrees to 600 degrees. The interface adopts special material to conduct heat quickly. Please note: After 30 seconds, please remember to release the switch 3-5 seconds
(9.8 ft (3 m) power cord) With a 9.8 ft (3 m) power cord, the electric heating cutter is easy to move around and can be used for a variety of cutting Release the switch and the hot knife will stop working to ensure user safety
【7.9 inch (20 cm) Blade】Easy to install and clean. Suitable for most occasions and meet your requirements!
(Over 30 Types of Cutting Materials) FoundGo electric hot knives can cut styrofoam, rope, nylon rope, sponge, webbing, fabric, plastic film, KT boards, EPS, XPS, polyethylene, cross-linked polyethylene, polypropylene, and many other foam plastics and materials
Fast Heating: The temperature rises rapidly, and the tube reaches 32°F (150°C) within 10 seconds
Multi-functional: The power supply has overvoltage protection, overcurrent protection, and overheating protection. Automatic power outage after overload extends service life. Ergonomically designed handle with red start switch for easy operation and grip
Scope of application: The foam cutter pen is suitable for producing low-density styrofoam, art models, students' handmade practice, and advertising complaints
【Smooth Cut】Cuts bubbles smoothly and quickly, seals edges neatly and leaves no debris
Product Specifications: Material: Nickel chrome, gold, stainless steel; Weight: 10.2 oz (290 g); Power: 30W; Room temperature resistance: 20; Maximum heat resistance: 200 °C; Pen length: 9.8 inches; Voltage: 110-250 V; Plug type: US plug
Adjustable Temperatures: To cut various densities and materials, the temperature of the cutting is required to adjust the temperature of the electric heating wire
(Can be cut into a variety of shapes) The foam cutter can be cut into a variety of shapes. Cut stencils or foam blocks from any angle and machine the shape you need. By adjusting the angle of the heat line, you can easily cut templates and blocks into shapes such as cylinders, cones, tapers, cubes, polygons, cubes, polygons, and more
【Fast Heating】The electric heating wire is heated rapidly, easy to cut and mold all forms and cut out the foam smoothly, sealing edge is clean without leaving any debris, very convenient
Note: We recommend wearing work gloves when cutting them. Turn off the power when fully disconnected. Please be careful as it will smell when cutting. It is recommended to cut in ventilated environments
Multi-purpose: Used for cutting low-density foam materials such as foam, low-density sponge, EPE, KT boards, extruded plastic, board wax, etc
Special cutter for cutting and processing of insulation and styrole
Cutting and processing insulation from glass wool, hard urethane foam, and extruded polystyrene etc., with smooth cutting and processing for efficient work
The temperature control dial on the handle allows you to control the approximate amount of heat. 15 thermal strength scales ensure the right temperature for every job
Suitable for commercial and industrial applications and can cut light foam, KT Board Pink Foam, PU, Polyethylene, EPS and Extruded Polystyrene (XPS), Styrofoam, Polyester foam, Sponge, Rubber etc
Includes heat cutter, 1 6" and 8" blades, 1 angled cutter, 1 tape measure and 1 drawing pen, hard plastic case, hex wrench, and cleaning brush