Lead2Amazon

Applications: Hole filling, molding, repairing and bonding in various areas

Easy to knead, hardens

Strong waterproof

Versatile, super strong adhesive

Can be drilled, nailed, polished, or painted (please drill a hole when nailing. )

Cold and heat resistant (-29 - 149 degrees Celsius) / Suitable for indoor and outdoor use

Can be submerged after fully cured

Also suitable for water pipes (JWWA Standard Z-108)

Ingredients: Epoxy resin (15%), other ingredients (85%: inorganic, mercaptan resin)

Contents: 2.0 oz (56.7 g); Product Size: H 7.7 x W 3.7 x D 1.4 inches (194 x 95 x 35 mm); Product Weight: 2.8 oz (80

Active Ingredients: Capsaicin MC (Micro Capsule)

Packaging: 2.2 lbs (1 kg)

Agent Type: Putty (clay)

Do not use for anything other than the intended purpose.*After use, avoid high temperatures, high humidity, and direct sunlight, close the cap tightly, always keep the cap facing up, and store out of reach of young children.*When opening the cap by squeezing the container strongly, the contents may squirt out due to pressure.*Due to the characteristics of the ingredients, a small amount of water may come out when first used, but this does not affect the quality or effectiveness.*Due to the characteristics of the ingredients, the product may slightly shrink when it hardens.If you are concerned about the product drying out, apply the coating in 2 to 3 sessions, allowing it to dry in between applications.*If you feel unwell, stop using the product immediately.*Take care not to get the product in your eyes or mouth.If it accidentally gets into your eyes, do not rub them and immediately wash thoroughly with running water.If swallowed, make the person drink a large amount of water and induce vomiting, and in either case, bring the product with you and consult a doctor immediately.*Dispose of empty containers and the like according to local regulations.

Color: Gray

Ingredients: Portland cement, sand, other

Curing Time: Approx. 24 hours

Installation area: 0.4 inch (10 mm) thick x 17.7 inch (450 mm) x 15.7 inch (400

Width: 11.9 inches (303 mm)

Height: 11.9 inches (303 mm)

Thickness: 0.2 inches (4 mm)

Polypropylene

Gap seal for areas where waterproof, insect proof, corrosion proof, and sealing properties are required

Construction relations: electrical wiring and piping through, electrical equipment, etc

Marine relations: waterproof ground, electrical equipment, etc

Vehicle Relationships: Cars, Cars, Airplanes, etc

Planting relations: Cut protection after pruning trees

Board color

[Uses] ・For setting foundation for painting, wallpaper, cloth finishing, processing gypsum board joint grout.
Processing of plaster board screw heads, disposal of gypsum boards

Because it is a powder type, you can fine-tune the viscosity to ease the use by adjusting some amount of water when mixing it

Plaster-based powder putty with mildew resistant agent

Country of Origin: Japan

Color: Gray

Ingredients: Portland cement, sand, other

Curing Time: Approx. 24 - 48 hours

Installation area: 0.2 inch (6 mm) thick x 11.8 inches (300 mm) x 11.8 inches (300

Epoxy putty for metal reinforce clay! Just cut, knead! It hardens like metal in about 15 minutes. After 1 hour

Can be used for repairing broken threads, repairing water leaks in water pipes and tanks, repairing furniture and gate doors, reinforcing and repairing automobiles, agricultural equipment and ships, simple molding, making jigs, etc

Materials with adhesion/repairing effects: Aluminum, copper, brass, iron, fiberglass, plastic, glass, stone, ceramics, wood, and other hard objects

Impervious to chemicals such as battery fluids, solvents and oils

Oil-proof, water resistant, and acid resistant. Curing time 15 minutes (60 minutes to complete hardening). Heat resistance: -60°C to 260°C

★Repair areas can be done underwater!! In that case, please kneaden well before working in water. Press hard to repair area and do not leave until hardening begins

Not suitable for reinforcing, repairing, or bonding soft materials such as rubber

Some materials cannot be glued such as unsaturated polyester