Lead2Amazon

Size: Total length: 6.7 inches (17 cm), Height: 1.2 inches (3 cm), Weight: 12.6 oz (345 g), Mounting hole diameter: 0.4 inches (10 mm), Base diameter: 2.6 inches (66 mm),

【Strong Magnetic】The back side has 6 strong magnets that are safe and stable, and each magnet has a vertical tension of 33.1 lbs (15 kg). And all magnetic surfaces are covered with a soft rubber cover to prevent scratches on the surface of your car and leave no traces

No Drilling Required: The magnetic base allows you to attach it directly, so there is no need to drill holes, and will not leave marks or stains after installation or removal

Note: Please keep the surface of the car clean when using

Applications: Convenient and practical for use in warehouses, vehicles, marine, agricultural machinery, etc

This product is for the long-selling "square base" model of the INNO system carrier

This product is a square bar for the Carmate inno base carrier

Product Number: EF3TMX Square Bar Rain Molle Foot Set (Low Type)

The new black base design combines the look and functionality of any car type. We have continued to adopt the perfect lock, and the smaller key has changed the model to a smarter appearance

For more compatible models, please check the PIAA homepage "Fitment Information" to see if it fits your vehicle. Note: Please be sure to check the "Application Chart by Vehicle before purchasing

Includes: Foot (4 x 4), Mounting Bolts (4), Key Case (4), Under Gasket (4), No.555 Holder (4), Lock Key (2), Hex Wrench (1), Large Hex Wrench (1)

Overview Specifications: Fully lock / Bottom bar dimensions: 5.6 inches (142 mm) / Product weight: 6.1 lbs (2.9 kg) (4 pieces)

This product is a square base carrier set by Carmate INNO. (1 car)

This is a 3-piece set that is necessary for mounting to your vehicle, 1. Base stay, 2. Mounting hardware (hook), 3. Square base bar

[Compatible models] Honda N Box (Compatible years: September 29 - October 2005 *As of January 2025/JF3/JF4/JF5/JF6)

Stay Height: 3.9 inches (100 mm), Weight: 11.8 oz (3,100 g), Color: Black, Type: Roof On Type, Regulation: ECE R26 External Projection Regulations Compliant: Cylinder key is standard equipped (prevents falling off or theft)

This product uses a torque knob. When the correct torque is reached, there is no need to worry about overtightening and breaking down

This product is a square base carrier set by Carmate INNO. (1 car)

This is a 3-piece set that is necessary for mounting to your vehicle, 1. Base stay, 2. Mounting hardware (hook), 3. Square base bar

[Compatible models] Mitsubishi Delica D5 (Compatible years: 2017 and later)

Stay Height: 3.9 inches (100 mm), Weight: 11.8 oz (3,100 g), Color: Black, Type: Roof On Type, Regulation: ECE R26 External Projection Regulations Compliant: Cylinder key is standard equipped (prevents falling off or theft)

This product uses a torque knob. When the correct torque is reached, there is no need to worry about overtightening and breaking down

This product is a square base carrier set by Carmate INNO. (1 car)

This is a 3-piece set that is necessary for mounting to your vehicle, 1. Base stay, 2. Mounting hardware (hook), 3. Square base bar

[Compatible models] Sienta (compatible years: 2017 to 2018 4 and later *As of January 2025)

Stay Height: 3.9 inches (100 mm), Weight: 11.8 oz (3,100 g), Color: Black, Type: Roof On Type, Regulation: ECE R26 External Projection Regulations Compliant: Cylinder key is standard equipped (prevents falling off or theft)

This product uses a torque knob. When the correct torque is reached, there is no need to worry about overtightening and breaking down

This product is a square base carrier set by Carmate INNO. (1 car)

This is a 3-piece set that is necessary for mounting to your vehicle, 1. Base stay, 2. Mounting hardware (hook), 3. Square base bar

[Compatible models] Honda Freed (Compatible years: September 28 to June 6/GB5-8)

Stay Height: 3.9 inches (100 mm), Weight: 11.8 oz (3,100 g), Color: Black, Type: Roof On Type, Regulation: ECE R26 External Projection Regulations Compliant: Cylinder key is standard equipped (prevents falling off or theft)

This product uses a torque knob. When the correct torque is reached, there is no need to worry about overtightening and breaking down

This product is a square base carrier set by Carmate INNO. (1 car)

This is a 3-piece set that is necessary for mounting to your vehicle, 1. Base stay, 2. Mounting hardware (hook), 3. Square base bar

[Compatible models] Voxy, Esquaire, Noah (Compatible years: 2016 to 2017 40)

Stay Height: 3.9 inches (100 mm), Weight: 11.8 oz (3,100 g), Color: Black, Type: Roof On Type, Regulation: ECE R26 External Projection Regulations Compliant: Cylinder key is standard equipped (prevents falling off or theft)

This product uses a torque knob. When the correct torque is reached, there is no need to worry about overtightening and breaking down

This is a RIDE-FiELD Ridefield connection bracket

(An aero-base set for the Jimney and Gymnie Sierra) This is a set of 2 aero base carriers made specifically for the Gymny (JB64) and Gymnie Sierra (JB74) to complete the base carrier

Product Features: A base for Jimney drip roof (rain gutter type roof) (4 pieces) Designed to be low when installed to enhance the sense of integrity with your car. A strong polygonal design aluminum aero bars (2 pieces) The aerobar is compatible with T-slot attachment attachments and the T-slot part is not required for cutting rubber, allowing you to move freely over the T-slot and easily adjust the attachment position

Contents: 1. Aerobar/rubber molding x 2. 2. Base (3. Mounting hook + 4. Hook plate + 5.M8 x 35 volt) x 4. *3, 4, and 5 parts are built into 2. 6. Panel plate x 4, 7. M6 x 15 x 8, 8. Cap x 4, 9. Hex wrench (B=5) x 1, 10. Hex wrench (B=6) x 1, 11. Instruction manual x 1, 12. Spec sticker x 1

[Compatible models] As of November 2024 (R6), Suzuki Jimney JB64 Series H30.7 ~ Suzuki Jimney Sierra JB74 Series H30.7 ~

Note: The minimum gap between the bar and roof of this product is 1.1 inches (28 mm). Attachment must meet the requirements of "bar and roof minimum gap" The minimum gap between the bar and the roof is narrow, and the attachment hardware will interfere with the roof and cannot be installed. Please check the measurement below the bar you need to install the attachment before purchasing. The length of the bar is 53.1 inches (1375 mm) in front and back