Lead2Amazon

【Package Contents】1 x Riwheel Puller Two Size:M27*M24 Inner diameter 24mm; Outer diameter 27mm Please check the size before purchasing

(Sturdy Metal) The high-quality metal construction is sturdy and does not deform, and it is strong and durable. High precision, professional manufacturing, perfect fit for the bike, can withstand long time use

Easy to Use: Easy to install, requires little procedures, and is easy to operate. When using, the bearing is pinched by three grippers, the rum with screw bars will rotate and the bearing will gradually pull out from the shaft

【Motorcycle Repair Tool】This puller is used to disassemble flywheel and rotor. Easily repair your motorcycle without damaging it

Wide range of uses: This product is suitable for various sizes of vehicles, including Honda, Kawasaki, Suzuki, and Yamaha. Ideal repair tool for separating bearings

Applications: By applying this product to screws used in high heat areas, it can prevent cass, rust and corrosion from baking

Examples of Uses: Spark plugs, muffler mounting bolts, cylinder head bolts, crankcase bolts, etc

[Specifications 1] Applicable temperature: -51 to 871 degrees

Specifications 2: Contents: 1.0 oz (28 g)

Specifications 3: This product has passed US military standard (MIL-A-907E)

Special guide pin to prevent wheel alignment when installing wheel and wheel fall off

Compatible with wheel bolt size M14

Product Name: GT-TOOLS Universal Pulley Holder; Product Number: G81015

Compatibility: Universal

Compatible Sizes: For use with Φ1.8 - Φ4.7 inches (45 - 120 mm)

■Purchasing Notes: There may be some scratches or pain due to overseas products. Please refrain from purchasing this product if you are looking for a complete product. Please note that the color of the actual product may differ slightly from the product depending on your monitor settings. ・Please be aware that this product is sold out at the same time on other sites

Reborn as a new fine line pen. There are 5 different points of fineliner pens. 1. The vessel has become larger. 2. Turn the middle part of the fine line pen to reveal the included needle tool so it does not add bulk. Prevents loss. 3. The needle of the included tool is bent, but it is easy to clean. 4. Japanese support is available. Please feel free to contact us. 5. This is a lifetime warranty

Used for automotive touch up paint and much more High quality and easy to apply. Inconspicuous number of scratches

Action First Japanese instruction manual included. Download from the QR code on the back

Cleaning: After using, soak in the lacquer thinner (so-called thinner) [sold separately] for a while, and the included tool (rotate the middle part of the fine line pen will reveal the included needle tool) and lightly apply the tissue several times while removing the clog

Caution: Please take care of this product in order to reuse it over and over again. Also, since the tip is 0.02 inch (0.5 mm), it may be hard to get out depending on the intensity of the paint. In that case, you will need to stick the tip or dilute the paint itself

TPU material: This air wedge is made of TPU material. It has excellent durability and abrasion resistance. It is safe and airtight. The air cushion and pipe are laminated with a integrated switch valve, so it can reduce the problem of leakage

Air Jack: Size: Approx. 6.5 x 5.9 inches (165 x 150 mm), Tube Length: Approx. 9.8 inches (250 mm), Set of 2, Load Capacity: Approx. 220.5 lbs (100 kg). Also Compact and lightweight size, convenient to carry and store

Convenient Storage: Before using the air jack, it is not thick and thin, so it is easy to store and store and does not take up much space. Easy to insert into small gaps, can be used repeatedly. It can lift up to 100kg weight and expand the gap without damage

Easy to use: Just insert it into the gap between the door and the interior gaps, and send it with a pump and inflate it and you can remove it and pry it open. Press the button near the air pump to release the air immediately. Air jack is easy to operate, manually inflate air to facilitate easy and fast air conditioning installation and maintenance

【Widely Used】Used to unlock the car and unlock the key when locking, lifting refrigerators, furniture, bookcases, windows, doors, cabinets, pressed pom lockers, etc. By inserting the main unit into the gap and pushing the included pump, the main unit can inflate and lift. This tool allows you to create a gap for opening tools without damaging your air jack and doors

[Uses] Motorcycle plug removal tool

Specifications 1: For square 3/8 inch (9.5 mm) insert

Specifications 2: Built-in rubber grip holds the plug

[Specifications 3] Material: Chrome vanadium steel

Note: *Magnets are not built in

Set Contents: Main unit x 1, L-shaped holder x 2, other tightening parts

Load Capacity: It has an excellent loading capacity (340kg/750LBS) It can be used to maintain off-road bikes, trial bikes, motard bikes and many vehicles without deformation when raising the rear wheel. Holding height: about 335mm

Convenient to Use: Easy to assemble and adjust the swing arm width (approx. 9.8 - 14.0 inches (250 - 355 mm)), according to the user's needs. Comes with casters so you can raise your bike easily

【PROTECTIVE DESIGN】The holding surface of the bike stand has a protective design that will leave the height of the handle and ground to avoid overfalling and rubbing your hands

Note: 1. There may be cases where it cannot be used depending on the car model or motorcycle specifications. Please check the dimensions and loading capacity before purchasing. 2. Please avoid using it for a long time. 3. If you have any questions or suggestions from the date of purchase, please feel free to contact us with this after-sales service. 4. During manufacturing, iron powder is inside the pipe, but it does not affect the use. Please remove it when assembling

Set details: Main unit x 1; U-shaped holder for rear x 2; Lock nut x 2; Hex wrench x 1;

[Load Capacity] It has excellent loading capacity (340 kg/750 lbs). This is a rear wheel bike stand that can be used for a wide range of purposes, from motorcycle maintenance to daily repairs

Convenient to Use: Comes with a hex wrench that is easy to assemble and can be adjusted to suit the user's needs. It can be used on off-road bikes, trial bikes, motor bikes, and many other vehicles

【Safe & Durable】The whole body is made of solid steel and has a rust-proof coating. Adopts lock nuts, rubber washers are included, making it difficult to loose. Four casters for added support

【Precaution】1. Please check the dimensions and carrying capacity carefully before you buy it because it may not be compatible with your vehicle or motorcycle specifications. 2. Products will continue to be optimized, please take the actual product to standard. 3. Factory test to ensure product quality, there may be scratches on the insert. Or there may be some minor scratches and iron powder during transportation, but this is a brand new one. This is not an issue with normal use. Please be careful when you want a beautiful product

Convenient to maintain: Simply rotate the stand to raise and lower the tire and rotate while hanging the tires, greatly improving the effectiveness of repair. Since the rear wheel rotates, it is very useful for cleaning and maintenance of chains, tires, and wheels

What is a jack stand: A convenient tool that can easily jack up the rear wheel by using it with a side stand. Not only does it significantly improve the efficiency of chain cleaning, tire and wheel maintenance, but it can also be used as a sub-stand to reduce the chance of falling over due to strong winds, earthquakes, and pranks

Specifications: Stand height 10.4 - 14.8 inches (265 - 373 mm) with stepless adjustment