Lead2Amazon

Successor to the original QuickHold: The fastest smartphone holder on the planet that allows you to attach and remove your smartphone with one hand. Just press the smartphone to hold it instantly. Just squeeze the release lever on both sides to open it. "I like the first generation quick hold but can't be used due to the camera outside, but I want to make it possible to use it with smartphones with 0.6 inch (15 mm) thick and tall smartphones." This model is recommended for those who want to lock their arms and be prepared for unforeseen circumstances

(Updated customer feedback from the KDR-M11C to the product) (1) The shape of the camera is changed to avoid the protrusion of the camera. 2. Increases the outer shape of the internal gear for improved opening and closing limit. 3. Wide adjuster supports vertical smartphones. (2) The thickness has been changed from 0.5 inch (12 mm) to 0.6 inch (15 mm) to the depth of the arm for your smartphone. ❶ Adding arm locking mechanism

Compatible Models for Reference Models: iPhone/15/15Pro/14/14Pro/13/13Pro/12/12Pro Max/12mini/11/11Pro/11Pro Max/X/XS/XR/XS Max/8/8 Plus/7/6/SE3/SE2/Samsung Galaxy S Series/Sony Xperia Ace/OPPO/Sharp Aquos/Google Pixel5/4 /3, Kyocera Torque, etc. *Please check the actual size of the smartphone accessory including the case and other requirements. ■ Height 5.5 - 7.0 inches (140 - 177 mm), Width 2.4 - 3.7 inches (62 - 94 mm), Please check whether the size of the smartphone model Thickness: 0.6 inch (15 mm) or less (please be careful of smartphone models and cases with thickness. Note: The release lever feels firm in order to increase the opening and closing limit. Firmness will be reduced with the number of uses

[Product Specifications] Holder Size: Height 5.5 - 7.0 inches (140 - 177 mm), Width 2.4 - 3.7 inches (62 - 94 mm), Thickness 0.6 inches (15 mm); Material: Aluminum alloy (mount), Polycarbonate + ABS; Set contents: Main unit (17 mm ball/32 mm / 15.4 / 28.0 mm) / 2 mm) mm), 2mm rubber tape Hex wrench, instruction manual (English language not guaranteed); Brand: Kaedear; In case of the case, we recommend using the KDR-SFB-C safety band or use the strap KDR-SFB-S, carabiner, etc., and connect it to the handle after the holder set to keep in case of unforeseen situations

[Manufacturer's Warranty] ■ Manufacturer Warranty Period: 1 year (based on the same day of purchase) Kaedia will support you after sale to make your satisfaction. Not only are the products unknowns, but we also have certified staff to consultation about installing the bike, so we will respond to our expertise. In the event that you will be diagnosed as a defective product occurs from a defective product, we will prosecute in accordance with our manufacturer warranty regulations and will repair and replace for free of charge. When used for commercial use, please take half the manufacturer's warranty period. (e.g. if the manufacturer's warranty period is 1 year, it is 6 months, and the same day with 6 months added to the date of purchase). Please see the official website for details. After installation, even after use. As a Japanese manufacturer, we will treat you with the heart of entertaining. Please feel free to contact us first

2 functions in 1. Get yours today! 2 ways to install this smartphone holder on a motorcycle. 1. Can be attached to a mirror. Solve your problem without having to handle space on your motorcycle! Safe for motorcycles with narrow handlebars. The flexible design fits any bike and makes it stress-free to wear. 2. Can be attached directly to the steering wheel. Even beginners can install it without hesitation. You can choose to fit your preference and shape of your bike. High degree of freedom and suitable for any situation

Single hand operation. Auto lock in 1 second! JOYROOM brand new motorcycle smartphone holder has an upgraded auto lock button. Four corner arms automatically lock the phone when the middle button of the holder is pressed, and press both sides to unlock. Tested to withstand 3000+ pushes Not only for men, but also for women and the elderly people

(100% Will Not Fall Off! Hold your smartphone like a vice. 】:Both the clip and holder are cushioned to protect your phone and handlebar. It also has a fast locking switch on the back of the motorcycle phone holder, which can double lock your phone when driving on bumpy roads. You don't have to worry about your phone vibrating when it reaches 160mph

Super thick silicone provides excellent protection. Sturdy reinforced ball head! Joyroom Bicycle Phone Holder Handlebar has passed SGS military standard toughness test, the ball head is made of high toughness military A+ material, effectively prevent the problem of breakage, making it a good choice for long-term use. Secures and protects your smartphone from scratches. Safe for any shock! Anti-slip design holds your phone securely Keep your precious device in tip-top condition!

【Universal mount with 1 piece! Compatible with Many Devices: You can attach it to your smartphone, action camera and light as well. Great for any occasion. The compact design makes it easy to carry around and supports your creativity. The smartphone holder for motorcycles and bicycles is suitable for handlebars of 0.7 - 1.6 inches (18 - 40 mm), and can be used for motorcycles, bicycles, electric scooters, strollers, electric bicycles, road bikes, treadmills, etc. 4.7"-7" Cell Phone, Thickness (including phone case) ≤ 0.71", Suitable for iPhone, Samsung, Xiaomi, Google Pixel, VIVO, One Plus etc

Joyroom Worry-Free After-Sales Service: Comes with a peace of mind and responsibility that the product defects are caused by the product even after installation. Reliable customer service will reply you within 12 hours and provide the right solution

Attaches to the tank with a rubber coated super strong magnet

The beauty of billet aluminum material

A simple design that eliminates waste

(Sun Visor for Smartphone Holder) Kaedia users gathered together in twitter, in the summer temperature protection, the smartphone cannot be used by battery controlled, and the touch screen cannot be operated by rain drops, so we have received a lot of voice when you want to develop a sunshade for your smartphone holder. With this thinking, we have developed this product in front of the user in front of the user in order to meet the expectations of users who have been loved by everyday use. The construction allows the visor to be moved up and down, expandable brim, aluminum shroud for heat insulation, and ventilation for enhanced heat dissipation

(Sun Protection and Rainproof) During summer touring, the effects of the heat caused by the sun and heat generated by maximum brightness of the screen, the temperature protection of your smartphone will not be able to be used. Reduce smartphone temperature by creating shade and lowering the brightness of the screen. During rainy touring, the rain drops adhering to the screen of your smartphone will not be able to operate the screen or cause malfunctions. Sun visor keeps your phone from rain and maintains its operability Note: 1. The size is required to ensure the effect is effective. It is possible that the sun visor is larger than you thought and the meter is less visible. 2. As the weight increases, the strength of the clamp bar may cause vibration to shake or break. Compatible Part Numbers: KDR-H3/KDR-H4W/KDR-HB1/KDR-HB2/KDR-HB2L/KDR-HB3/KDR-HB4; Not Compatible with KDR-H3-2 (Easy to Shake Up)/KDR-H4-2 (Excess Weight) / KDR-H4-3 (Excess Weight) / KDR-H4S (Excess Weight). 3. A separate mounting part may be required

KDR-V1 Coaxial Type: Uses a 0.7 inch (17 mm) ball mount that does not have the threads included with this product, and it can be used with a long bolt to the rail that has threads. The one-piece construction makes the back of the holder a clean impression. Note: 1. Since the clamp bar must be horizontal to the direction you want to point the holder in the vertical direction only. If the clamp bar is slanted and the holder is adjusted to face the front of the ball joint, it cannot be installed. 2. The back of the holder must have space for the sun visor. Please check in advance that the screen or other obstacles do not interfere. 3. Cannot be used with other than a 0.7 inch (17 mm) ball type. Compatible Part Numbers: KDR-M6/KDR-M6S/KDR-M6S-1/KDR-M7/KDR-M8S/KDR-M8SP/KDR-M9S/KDR-M11A/KDR-M11C/KDR-M12/KDR-M13/KDR-M14C/KDR-M14A/KDR-M18A/KDR-M18C

KDR-V1-M/Separate Type: Separate structure that mounts independently next to the holder. Use the included 1" ball bar mount and the 1" ball on the sun visor in an intermediate mount. The angle can be adjusted in all directions, so it is highly versatile for many clamping conditions and environments, and can be mounted to the Kaedia smartphone holder. Compatible Reference Model Numbers: Fits all model numbers

[Product Details] Size: Height 4.3 inches (110 mm), Width 4.7 inches (120 mm), Depth 6.3 inches (160 mm); Material: ABS, aluminum alloy; Weight: KDR-V1/12.0 oz (335 g), KDR-V1-M/470 g); Contents: KDR-V1/Sun Visor (Bolt fixed), 0.7 inch (32 inch (32 mm) ball bar mount (32 mm) rubber tape. , Rail KDR- V1-M/sun visor (1-inch ball), 1-inch ball bar mount (diameter 1.3 inches (32 mm)), attachment (0.4 inch (12/22/25.4 mm)), 0.08 inch (2 mm) rubber tape, intermediate mount 3.5 inches (90 mm). Note: 1. Smartphone holder is not included. 2. Depending on the smartphone model and usage purpose, you may not be able to experience the effectiveness. 3. There are many adjustment points, and the difficulty of DIY installation may be high. 4. Installation may be difficult due to the conditions of the steering wheel specific to the car model. Due to vehicle specific performance and driving conditions, the sun visor may drop or move

[Manufacturer's Warranty] ■ Manufacturer Warranty Period: 1 year (based on the same day of purchase) Kaedia will support you after sale to make your satisfaction. Not only are the products unknowns, but we also have certified staff to consultation about installing the bike, so we will respond to our expertise. In the event that you will be diagnosed as a defective product occurs from a defective product, we will prosecute in accordance with our manufacturer warranty regulations and will repair and replace for free of charge. When used for commercial use, please take half the manufacturer's warranty period. (e.g. if the manufacturer's warranty period is 1 year, it is 6 months, and the same day with 6 months added to the date of purchase). Please see the official website for details. After installation, even after use. As a Japanese manufacturer, we will treat you with the heart of entertaining. Please feel free to contact us first

【Rotary Camera Stay (License) - KDR-YX101】 Camera stays for driving recorders that attach to your license plate of your bike. Designed specifically for your dash camera for a clean mount, and the biggest feature is that the rotating plate allows you to adjust the angle of view left and right

Camera Angle Adjustment: In addition to the up/down angle adjustment (depending on the camera mount), it also has a rotating plate that can be adjusted to the left and right direction even after securing the camera with double-sided tape. This allows you to set the best shooting angle. You can also attach the camera directly with the included bolt. This method is limited to up/down adjustment (depending on the camera mount function). You can choose the installation method according to the situation

(Clean Installation) The camera is designed to stand out by attaching it to the back of the license plate. This attachment method maintains a polished look without compromising the design of your bike. In addition, the camera position is placed on the top of the license plate to ensure a rear view of the camera. Note: *Please select the right and left version correctly according to your desired camera position. Especially the position of the tail lamp or muffler should be considered. In addition, for fender-less bikes, we recommend using the YX-102 model which is more suitable for the tail lamp and camera to avoid interference

[Product Specifications] Plate Size: 1.7 inches (44 mm) (Dimensions A) x 1.2 inches (3 mm) x 0.4 inches (3 mm) (Dimensions C) x 0.4 inches (10 mm) (Dimensions D)); Plate Slot Hole (Height): 1.0 inches (3 mm) (Dimensions): 1.0 inches (25.4 mm) (Dimensions) ■ mm) (Dimensions) ■ mm) ■ mm) ■ mm) ■ mm) ■ Mounting Slot H ■ Mounting Slot Holes: 32 (Dimensions I) x 0.2 inches (6 mm) (Dimensions J): Between Mounting Slot Holes: 3.4 inches (87 mm) (Dimensions K); Weight: 3.2 oz (90 g); Material: Aluminum (Does not rust even if the paint is peeled off); Set Contents: Main unit, rotating plate, large washers, small nuts x 2, small washers x 2, bolts x 1; double-sided tape is not included with this product. ■ When using double-sided tape, the size may be large, so please cut the double-sided tape as necessary and be careful to adhere to dust. ■This product is compatible with the installation of cameras such as KDR-D711, D811, D801, D21, D22, and other drive recorders released by Kaedia. It is also compatible with other products and is universal

[Manufacturer's Warranty] ■ Manufacturer Warranty Period: 1 year (based on the same day of purchase) Kaedia will support you after sale to make your satisfaction. Not only are the product questions, but we also have eligible staff who have staffs regarding installation on a motorcycle, so we can respond to our expertise. In the event that you diagnose a defect resulting from a product failure, we will seek out according to our manufacturer warranty regulations and will repair and replace for free of charge. When used for commercial use, please take half the manufacturer's warranty period. (e.g. if the manufacturer's warranty period is 1 year, it is 6 months, and the same day is deadly based on 6 months for the month of purchase). Please see the official website for details. After installation, we will support you after use. As a Japanese manufacturer, we will treat you with the heart of entertaining. Please contact us freely

Smartphone Holder

Successor to the original QuickHold: The fastest smartphone holder on the planet that allows you to attach and remove your smartphone with one hand. Just press the smartphone to hold it instantly. Just squeeze the release lever on both sides to open it. This model is recommended for those who like the first generation quick hold but can't be used due to the camera outside, and want a holder that supports QI charging and USB power supply. ■ Updated customer feedback to the product: 1. Changes the shape to avoid the camera from appearing. 2. Increases the outer shape of the internal gear to increase the number of times the opening and closing limit. 3. Wide adjuster supports vertical smartphones. 4. The thickness has been changed from 0.5 inch to 0.6 inch (12 mm) to 0.6 inch (15 mm), and the arm on your smartphone has been changed to a deep 5. Adding arm locking mechanism

QI & USB Charging: 2 types of input methods for the vehicle 12 V and USB (QC3.0). QI charging and USB charging simultaneously ■Output: QI15/10/7.5/5W, USB (Type C) 18W (5V3A/9V2A/12V1.5A) *Charges with the power required by the model. ■ 12 V input: Connect to a vehicle 12 V power source for QI charging and USB power supply. Cannot be used with battery-less cars and 6/24 V batteries. ■ USB input: Can be connected to USB power QC3.0 for QI charging *Connector type C May not be compatible with USB-C power supply. Power bank may be shut off due to power suppression control. Please do not tighten the cap when in rainy weather. Please use KDR-SC1, KDR-SC2 because the USB cable has a narrow entrance. - Waterproof: IP66 supports sudden rain. ■Power switch: ON/OFF, does not work with USB input. When you receive 12V from 0V state, it will automatically turn up. ■Wiring: 5.9 ft (1.75 m) discreet black double cord (white letters line with positive side), (fuse holder included, bevel terminal can be converted)

【Installation requires expertise and technology. Note: For those who are not sure about the voltage drop (including the manufacturer) please wire the negative battery directly to the negative terminal. Body grounding can only be used when the battery negative terminal and ground point resistance is 0Ω. Please do not connect to the ground at unstable points such as the handle. Please be aware that the voltage drop due to the drop in contact area of crimped terminals. Ground resistance is normal when unloaded, voltage drops when loaded. ■ Please make sure to measure the load voltage in the following conditions. (When the wiring is connected and the circuit is established, the power switch of the smartphone holder is ON and SAE connectors with a gap and probe to measure). *The voltage measurement of the non-load will not be determined by the power supply or not

Compatible Models for Reference Models: iPhone/15/15Pro/14/14Pro/13/13Pro/12/12Pro Max/12mini/11/11Pro/11Pro Max/X/XS/XR/XS Max/8/8 Plus/SE3/SE2/Samsung Galaxy S series/OPPO/Sharp Aquos/Google Pixel, Kyocera Torque, etc. Case and ring etc. Please check the actual size including accessory requirements. Some series may not support wireless charging, please check the specs. ■ Height 5.5 - 7.0 inches (140 - 177 mm), Width 2.4 - 3.7 inches (62 - 94 mm), Please check whether the size of the smartphone model Thickness: 0.6 inch (15 mm) or less (please be careful of smartphone models and cases with thickness. Note: The release lever feels firm in order to increase the opening and closing limit. Firmness will be reduced with the number of uses

[Product Specifications] Holder Size: Height 5.5 - 7.0 inches (140 - 177 mm), Width 2.4 - 3.7 inches (62 - 94 mm), Thickness 0.6 inches (15 mm), Wide Adjuster Width: 0.4 inches (10 mm) (vertical ratio); Material: Aluminum alloy (mount) + polycarbonate + ABS (0.6.7 inches (15 inches (17 mm) ball). Mirror mount (22222 mm) 2/22 1.0 / 1.1 inches (25.4 / 28.6 mm), 0.08 inch (2 mm) rubber tape, hex wrench, SAE harness (fuse holder/gibboshi), conversion terminal (flat Y-shape / stag terminal), spare fuse, binding band, instruction manual (online only): We have suppressed the enclosed with paper media as an effort to reduce the product for decompresence in order to reduce the product for decompresence of decompressurizing the amount of environmental load. Visit or download from each product page on Kaedear official website. ■Brand: Kaedear; ■In case of any case, we recommend that you use the safety strap KDR-SFB-S, carabiner, etc., and connect it to the handle after the holder set to prepare for unforeseen circumstances

[Manufacturer's Warranty] ■ Manufacturer Warranty Period: 1 year (based on the same day of purchase) Kaedia will support you after sale to make your satisfaction. Not only are the products unknowns, but we also have certified staff to consultation about installing the bike, so we will respond to our expertise. In the event that you will be diagnosed as a defective product occurs from a defective product, we will prosecute in accordance with our manufacturer warranty regulations and will repair and replace for free of charge. When used for commercial use, please take half the manufacturer's warranty period. (e.g. if the manufacturer's warranty period is 1 year, it is 6 months, and the same day with 6 months added to the date of purchase). Please see the official website for details. After installation, even after use. As a Japanese manufacturer, we will treat you with the heart of entertaining. Please feel free to contact us first

iPhone 16 Pro Phone Case (SPC+)

Adopts the new type of clamp "SPC+". Includes a conversion adapter compatible with conventional clamp "SPC"

MagSafe supports fast wireless charging even when motorcycle is on

A unique feature of SP Connect that can be fixed with a 90° twist

Product composition: phone case x 1, conversion adapter x 1

Strong magnets ensure a secure fit. Safe to Ride at High Speeds: This super strong magnetic smartphone holder is a popular social media topic on the fuel tank of your bike. ★Material: High strength aluminum alloy, neodymium magnet N52, rubber; The rubber coating of the magnet and the pads to prevent scratches on the side clamps. The angle can be adjusted, so there is no need to worry about reflections or directions. If at a high speed of up to 220.5 lbs (100 kg), please remove it if you are not worried about it. It is a little danger to see the map. Please be sure to attach to the flat surface of a steel (iron) bike tank. The screws are especially loose due to vibration. Please install and install it firmly

(6 Super Strong Neodymium Magnets) The disc on the back of the holder has 6 super strong magnets, making it 20 times stronger than regular magnetic force. The clamp force is strong and holds your smartphone firmly so your smartphone will not fall off even when driving or vibrating due to brakes. In addition, the magnet is coated with rubber to prevent damage to the tank. Pull both sides of the holder to set your smartphone. Easy to install, remove and carry. When installing, be sure to install it on a flat surface of steel (iron)

Simply clip your smartphone and place it on the fuel tank: You can install it on smartphones ranging from 2.4 to 3.5 inches (60 to 90 mm). Simply place your smartphone in place and it has a simple and compact design that eliminates waste, and is compatible with any smartphone. The smartphone holder has a compact appearance design and is made of aluminum alloy material, making it convenient to carry. Prevents your smartphone from falling off even when you sway. Anodized Billet Aluminum Beautiful appearance and strength in one! Not only does it clean around the steering wheel when attached to a motorcycle, but you do not have to worry about blocking your vision while driving

Ultra Compact Size: Set Contents: Magnetic smartphone holder x 1, Size (approximate): 3.0 x 1.2 inches (76.8 x 30 mm), Compatible smartphone width (approx.): 2.4 - 3.5 inches (60 - 90 mm), Thread thread: 1/4 inch (1 inch (60 - 90 mm), Ultra compact size, so you can carry it in your pocket or purse! It is also a great point that you can use it immediately when you need it. It is also great for taking social selfies and SNS videos. Without a tripod, you can take full body selfies. ★ Comes with a storage pouch for easy portability. Steel fuel tanks are also highly versatile enough to be used regardless of the make or model of your motorcycle

Secure in Various Places: Not only can it be used as a smartphone holder, but it can also be used on a variety of magnetic surfaces, such as a motorcycle, refrigerator, or locker. Since it is 1/4 screw, it can be used with a standard tripod, and it can be used with a smartphone holder made of aluminum material. Also recommended as a tripod for your smartphone. Suitable for most tripods/monopod stands, selfie sticks, easy to use. (*Because the magnets are strong, please handle with caution. Note: There are limitless variations in the material of the tank, paint finish, thickness of the paint, shape of the tank, thickness of the smartphone case, and type of smartphone, so please be sure to judge whether it is suitable for your motorcycle, motorcycle tank, smartphone case, etc

Super Strong Magnetic: The 2025 upgraded version uses N52 reinforced magnets on a large area and is 25 times stronger than regular magnetic force. The smartphone will not fall off even when driving at high speeds, sudden brakes, or intense vibrations, and it will adhere firmly to flat iron surfaces

[Protective Design] The contact surface that secures the smartphone with rubber coating and sponge padding to protect the smartphone from scratches caused by vibration. It also enhances contact with the suction surface and provides a more stable fixation

(Convenient to Carry) Size: 3.1 x 2.0 x 1.2 inches (8 x 5 x 3 cm); Very lightweight and compact design. Easy to store in your pocket or bag, you can use it anytime and anywhere for travel, outdoor activities and daily life

(Durable Material) Made of high strength aluminum alloy and N52 strong magnets, it has excellent corrosion resistance and abrasion resistance. It gives you a stylish look yet durable enough to stand the test of time

【Easy Full Body Selfie Tool】Strong magnet allows you to shoot a full body selfie without a tripod. Perfect for VLOG and live broadcasting photography, it can be attached to a variety of magnetic surfaces, including refrigerators, storage cabinets, iron fences, and more