Lead2Amazon

Connection: Can connect various boards and photo tripod

PRE-INSTALL: This product has wood, metal, carbon and acrylic board mounted and connected to a DIY camping table photo tripod

Installation: Align the center of the flange to the center of the board or table top and screw in self-tapping screws or flat head screws

Set includes 1 3/8 flange base, 1 1/4 centering screws, 1 allen wrench, 4 flat head screws, 4 self-tapping screws, 4 screw caps

DIY Connector: DIY connector for outdoor camping

【Portable Tripod & 2 in 1】The MT-63 tripod is made of aviation aluminum alloy and uses pure mechanical CNC machined and hard anodized for stability and durability. The design allows the legs to be folded upside down and is only 10.4 inches (26.5 cm) after storage, making it super compact and convenient to carry. In addition, the center ball can be easily removed and used as a selfie stick

Height Adjustment and Low Angle Shooting: The travel tripod can be adjusted to over 10 levels (5 center balls and 5 leg tubes); The maximum height of use is 5 ft 1.2 inches (154 m), and the storage height is only 10.4 inches (26.5 cm). Smaller, lighter and ideal for macro photography at closer distances. In addition, you can press the tripod adjustment tab to adjust the 3 open angles of 23° / 55° / 85° to shoot at a low angle

Multi-functional Panoramic Ball Head: The camera tripod comes with a free ball head that can be rotated 360 degrees, allowing you to adjust the angle of the camera up to 90 degrees, allowing you to freely use both vertically and horizontally, allowing you to take high quality photos. It also supports 360° horizontal rotation so you can capture every moment and take amazing panoramic photos easily. In addition, it comes with a smartphone holder that can be adjusted 360 degrees rotation x 180 degrees. You can also use it as a programmer by holding your smartphone

(Wide Compatibility Tripods) Small tripod with a load capacity of 8.8 lbs (4 kg) and 1/4 inch screw, the tripod is compatible with most mirrorless SLR cameras, DVs, digital cameras, camcorders, phone holders, etc. vlog, live streaming, travel photography, etc. Tip: Load capacity 8.8 lbs (4 kg) is not to stretch your legs, and we recommend that all legs are stretched within 5.5 lbs (2.5 kg)

Product List & Manufacturer Warranty: List: MT-63 Tripod x 1, Tripod Storage Bag x 1, Hex Wrench x 1. You can rest assured and reliable 1 year warranty from the day of purchase. If there is an initial defective product, we can replace it. If you have any problems, please contact us

(Sturdy Carbon Tripod) Introducing Ulanzi TT09 VideoGo video tripod. Made of 10 layers carbon fiber material and CNC precision processing, the surface is sandblasted to give it a vintage texture. The metal part is made of aircraft-grade aluminum alloy, which makes it sturdy and stable The maximum load capacity of the tripod is 44.1 lbs (20 kg), and the weight is 3.3 lbs (1.5 kg), and only 17.7 inches (45 cm) after storage, making it easy to carry

360° Panoramic Video Head: The tripod head can be rotated +60°/-50° tilt and 360° rotation for panoramic shooting, allowing you to easily adjust the horizontal and vertical angle. Head Maximum Load Capacity: 11.0 lbs (5 kg). Integrated leveling bowl design allows for quick leveling of camera in one step. Fully adaptable to a variety of complex terrains

Multi-function Handle with Built-In Driver: The handle is designed with built-in screwdriver, so you can loosen it counterclockwise and remove it and transform it into 7 different types of drivers. Not only can you disassemble the center ball of the tripod, tighten the tripod screw, it is also commonly used for disassembling, assembling and repairing cameras, TVs, household appliances for everyday use, children's toys, etc. It has 7 different driver heads: CR-VT6, CR-V3.5, CR-VH2.5, CR-VH3.0, CR-VPH1, CR-VPH2, CR-VH4.0

5 levels of stretch and many uses: The VideoGo tripod can be stretched in 5 different levels from 16.1 to 56.1 inches (41 to 142 cm). The angle of the stand can be adjusted from 22°/55°/81°, and it has a 1/4 extension screw that can extend the magic hand or smartphone microphone so that most people can use the tripod according to the scene

【More Stable Center Ball】VideoGo camera tripod center pole is based on the triangular tube center pole on the traditional ZERO series tripod, and has been improved to a thicker and concave triangle tube than conventional tubes. The center ball is designed in this way that greatly improves stability. The center pole has an innovative 2-step detachable construction with the lowest angle of 5.5 inches (14 cm) on the market. In addition, the removal process is also very easy. It can be easily disassembled by simply turning the screw in the connection part with a screwdriver built into the handle

Set Contents & Weight Guarantee: VideoGo tripod x 1, Bag x 1, Driver Set x 1, Foot Pegs x 3. Compatible with all DSLR cameras, video recorders, Canon, Nikon, Sony, Olympus, Fuji, Pentax and more. We provide peace of mind and reliability from the day of purchase. If there is an initial defective product, we can replace it

● Quick Shoe Head with 1/4 & 5/8 inch Male Screw: The head head has a quick shoe that can be attached and removed with a single touch. In addition to the 1/4 screw on the quick shoe and a screw that converts to a 5/8 screw, so it can be used with cameras as well as markers, etc

● Handle and Storage Bag Included: Lightweight and convenient to carry with handle. It also comes with a dedicated bag, so you can use it when going to the site

● Easy to operate 1 handle 3-way head: Rotate the handle and loosen it to adjust the height of 90° and horizontal 360°. The quick shoe plate can also be angled at 90°. You can easily set the position without having to move the tripod every time you work

● Rubber Anti-Slip Feet & 2 Bubble Tubes: The surface of the rubber anti-slip feet can be adjusted to the angle, and the tripod itself has 2 bubble tubes, so you can fine-tune the adjustable rubber feet and bubble pipes even when placed on uneven surfaces such as slightly different heights

● Load Capacity Up to 22.0 lbs (10 kg), Includes Weight Hook: You can also attach devices up to 22.0 lbs (10 kg) on the tripod body. You can also hang up to 2.2 lbs (1 kg) of weight on the end hook to make the tripod more stable. Useful equipment for windy days and unstable places

Lightweight Design & Full Aluminum Body: The tripods for smartphones have been developed to be lightweight. The entire body is made of excellent aluminum material, including a head head head head that is easy to operate, and it has been introduced to a tripod that has a height of over adult height and excellent stability. The tripod with a large and firm body is strong against bumps and the main material is metal than plastic, so there is a significant difference in strength. The entire tripod weighs only 1.9 oz (570 g), making it lighter than a single single water (16.9 fl oz (500 ml). Of course, 24 month service extended! You can rest assured

5 Levels of Stretching & Storage: The highly durable tripod can be stretched in 5 levels, and can be adjusted to your preferred height from 21.7 to 62.2 inches (55 to 158 cm) (including iPad). Lever lock design allows tripod legs to be stretched and held securely When stored: 16.9 inches (43 cm). Comes with a storage bag, making it easy to carry. Great for children's sports events, school entrance ceremonies, cherry blossom viewing, festivals, travel, mountain climbing, airplanes, birds, etc

5 Tier Telescopic & M4 Standard: The 5-tier telescoping tabletop tripod can be extended from 8.7 to 9.8 inches (22 to 25 cm). Note: Please make sure your projector fits 1/4" screw (International Universal Size)

(Small & Lightweight) The tripod is only 8.7 inches (22 cm) when stored, and weighs 6.3 oz (180 g), making it easy to carry when going out, traveling, vlog, hiking, etc

360° Ball Head: 90° tilt angle and 360° rotation angle for projects and photography with a variety of angles

(Stability) Made of high quality ABS material with anti-slip rubber and lockable ball head for a comfortable grip

Quality Assurance: Comes with a 1 year warranty from the date of purchase. If the product is defective or defective, we will respond immediately, so please contact the seller to inquire. Also, if you have any questions or problems about the product, please feel free to contact us at any time. Contact Method: "Account Service" > "Order History" > "Sold By" > "Ask Questions" in Account Service

High Quality: The smartphone tripod is highly durable, and the bottom of the tripod is made of non-skid rubber to ensure stability. The latex on both sides and the intermediate sponge can protect your phone from scratches

(360° Rotatable Free-head Head) You can adjust the angle you like and tighten the screw to freely adjust the shooting angle you need. You can take it with you Perfect for travel

【Ultra Mini】 The size is easy to hold and useful in various places such as travel, weddings, online meetings, sports, etc. (load is less than 2 kg))

Can be installed anywhere: The height of the tripod can be freely adjusted. The legs can be rotated 360 degrees, and the legs can be freely bent, so you can install them on unstable ground or in various places

Wide Compatibility: Compatible with all models (OPPO, Google, Sony, HUAWEI, XIAOMI...etc.), comes with parts that support action cameras and are compatible with various digital cameras

✅ SET INCLUDES: 3 Piece Tripod Monopod Spike Nail 3/8" Thread Improved grip performance compared to conventional stone pins. Provides stability on smooth floor surfaces

✅Practical tripod/monopod accessory for stable shooting indoors and outdoors, 3/8" tripod monopod rubber feet spike for Benro Gitzo Manfrotto tripod monopod

✅ Made of high quality rubber material that prevents slipping, standard tripod spike, rubber thread diameter: 27mm Easy to install No special tools are required, just screw into the tripod to use

✅BALL HEAD DESIGN: The tripod stainless steel foot pad has a ball head design, which can support a large angle. Textured bottom design for non-slip design

When you receive it, please check the contents. We inspect each item, but in the event that there is a case of defective or defective, damage during shipping or differences in the order content, please contact us

【Lightweight Construction and Stability】Designed with sturdy aluminum alloy and ABS, this tripod can hold up to 6.6 lbs (3 kg). Perfect for selfies, group photos, adventure trips, Vlog, Youtube videos, podcasts, facebook lives, live streaming. Rubber feet prevent slipping even on bumpy floors

Height Adjustment: With 4 levels of stretch, you can quickly adjust the working height from 17.3 inches (44 cm) to 55.1 inches (140 cm) to suit various shooting environments and shooting needs. The storage size of 18.5 inches (47 cm) makes it easy to fit in your handbag, perfect for

【360° Panoramic & Tilt Head】Rotate the tripod head 360° or tilt between +90° to -75° to take panorama, overhead, vertical photos and videos. Two screw knobs lock the head firmly at the angle of your choice and allow you to easily balance the tripod at bubble level

(Converts Handle to Smartphone Holder) The 2 in 1 handle can be converted to a 2.2 - 3.7 inches (5.6 - 9.5 cm) adjustable cell phone holder. Compatible with most smartphones. Hold your phone in the grip and attach your camera or action camera to the tripod head to shoot two devices simultaneously

(Remote to take pictures and pairing) You can take remote shots within 32.8 ft (10 m). Easy to pair with your smartphone or tablet, perfect for selfies, gathering photos, commemorative videos, handheld photography, etc

【Service】If you have any problems, please feel free to contact us. We will try our best to serve you

The Mr. Y series features a Y-shaped center pole for both high maneuverability and slimmer

Accessories: Center pole (DC-282C), tripod storage case, maintenance tool, spike pile

Product Name: LY-254C+LH-30 (JAN: 4573138036815)

Total elongation: 61.3 inches (1,540 mm) / EV without EV Stretch: 55.1 inches (1,290 mm)

Minimum Height: 7.1 inches (180 mm) / Storage Height: 20.7 inches (525 mm)

Product Weight: 2.6 lbs (1,330 g) (Short Poles: 4.9 oz (1,285 g) / Load Capacity: 17.6 lbs (8 kg)

Maximum Leg Diameter: 1.0 inch (25 mm) / Number of Legs: 4 steps / Leg Extension Adjustment Method: Nut lock

Head Mount Base Diameter: 1.8 inches (45 mm) / Mounting Screw Standards: UNC 3/8, U 1/4 car / Mount Head: LH-30

Accessory mounting screw: 2 body parts (UNC 1/4)

Main Material: Carbon legs, aluminum