(2024 New Model) 5-layer structure: anti-oxidation film + diamond processed aluminum foil + non-woven fabric + butyl rubber sheet + protective film. Only butyl rubber sheet is 1.2mm and the overall thickness is 1.5mm. The construction of the manufacturing process makes it easier to store and the glue will escape even after long-term storage and has strong adhesion. The adhesive strength of the protective film is peeled off and it will stick to your hands easily. The adhesive strength is low and durable
Repositionable: Our new butyl tape is so easy to reapply and remove it immediately if you make a mistake. The longer the time the adhesive will become stronger, and the more waterproof it will be. If you do not attempt to reposition it, please remove it immediately. Please pay attention to the application time. Waterproof tape with super strong adhesion, easy to work and cut freely Aluminum butyl tape that is easy to apply
[Strong and Versatile Waterproof Repair Tape] Aluminum butyl tape can be used for repairing metal roofs, RV roofs, wall leaks, water penetration, container sealing, water pipe repair, indoor and outdoor emergency waterproofing. Bonds well and perfectly to metal, glass, plastic, tile, concrete
(High purity, waterproof and heat resistant material) Repair tape for water leakage. Made of pure butyl rubber, safe and eco-friendly, non-toxic and non-irritating smell. It has a higher stretch and longer lasting than impurity or inferior materials. Aluminum Butyl Tape, Waterproof is guaranteed if there are any defects or initial defects, so please purchase with confidence
A great helper when you have trouble with water leaks in your house, cracking on your roof, water leaks on your veranda, campers, pipes, basements, toilets, interior construction, concrete, tiles, metal, etc. It is sticky enough to lift a chunk of concrete
Easy to install: The waterproof butyl tape is easy to carry and easy to install without having to experience waterproofing. Easy and quick installation on tight corners and textured surfaces. The surface must be clean, dry, oil-free, and dust-free when installed. Cut to a certain size, peel off the shielding membrane, press strongly on the surface to adhere to the base. (Note: The viscosity may decrease if the temperature is too low, so it is recommended to install at temperatures above 3°F (13°C). )
Note: 1. In order to ensure waterproof effect, the tape should be placed on the side that is directly exposed to water, and do not stick it on the back to prevent water from entering. 2. Check the leakage area and make sure the gap is fully covered. For cracking concrete, it is recommended that you apply a tape with a width of 10cm or 15cm 6. Do not remove the back immediately It is completely adheres to the basic surface and takes around it to reach its best
All sizes are shipped in simple packaging