Lead2Amazon

Bishamon (Bishamon) 2 columns and gate-style lifts are included in a set of 4 ultra-low floor adjustment cradles

Suitable for 3-tier arms (NSA, OSA, NSP, OSP, SPA series, etc. This is an attachment for lifts manufactured from August 2005. Cannot be used with older models (lifts produced before August 2005)

At its shortest, the floor is about 1.5 inches (37 mm) from the top of the arm, so it can be used with low car heights such as low down cars and aerodynamic vehicles

The rubber base size is the same size as the genuine product, so you can use it with genuine rubber

Set Contents: Lift Attachment Set of 4 (with rubber receiver) Insert Size: 2.0 inches (50 mm)

(Size) Plate Thickness: Approx. 0.3 inches (8 mm); Other images may differ slightly from actual product

Note: Please note that the screw part has a grease coating. Please check the size and shape of the installation location. This product is brand new but there may be small scratches or stains that are not interfering with use

Total Length: 2.5 inches (64 mm)

Width: 1.4 inches (36 mm)

Thickness: 0.06 inches (1.5 mm)

Number of Screw Holes: 6

Hole Diameter: 0.1 inches (3.2 mm)

Load capacity when using 2 pieces: 22

D2 mm : 0.3 inch (7.5 mm)

Weight: 1.6 oz (44 g)

Energy saving arm 15.5"/39cm: 2 x longest hand lifting tools that can lift up to 15" It meets all your needs. The longest hand lift tool currently available

HIGH QUALITY SOLID STEEL MATERIAL: Upgraded lifting tool, thick solid steel base and lifting rod, stronger lifting capacity, thicker stainless steel corrugated high strength spring, longer service life. The wide handle design increases the force load area. Now easier to use

Arm Hand Tool Unique Steel Process: The steel material of the high regulator has undergone a secondary hardening process. Lifter tool steel is stronger than regular steel and holds up to 5 times more than original steel (quenching process: heat steel to critical temperatures and hold for a certain time). Soak in cold media immediately after a period of time and cools rapidly to improve the strength, toughness and abrasion resistance

Multifunction energy-saving arm: stainless steel energy-saving height adjuster is very suitable for door and window installing, splicing floors, wood, furniture, tiles, products, etc., raising plywood, counter top, frame, porch, cabinet, 2 people. Please use the height adjuster for work. Easy solving by one person, the most powerful installation assistant

Simple and Applicable: The arm hand tool jack set can be freely adjusted up and down to allow for easy height control. Squeeze the handle to raise the height and press the steel pressure plate lightly to lower the height. Perfect gift for installers, porters or any friend who really likes to make

Set includes: 2 pieces of plugging and out hinges; hinge size is 37 x 33 x 2mm Smooth surface, easy to clean, sturdy stainless steel shaft for support, hinges are not easy to break, long time use

REMOVABLE DOOR HINGES: Removable split design allows you to temporarily disassemble it when you need it, and reinstall it without removing the hinge, making it quick to remove

Left Side Hinge: This lift-off hinge is suitable for left side. Size: 37 * 33 * 2mm / 1.45 * 1.3 * 0.08 inch, each hinge has 4 fixing holes. The surface is smooth, no burrs, and will not hurt your hands during installation and placement

EASY TO USE WITH A DRIVER - Simply screw the fixed door panel into the door frame, screw the removable door panel into the door, and finally lock it to install. Simply insert the screws into the hole of the hinge with a screwdriver and secure it in place

Wide application: suitable for small home furniture, handicrafts, vintage wooden boxes, wine boxes, jewelry boxes, tool boxes, etc. Do not put excessive load on the door. Please confirm the hinge orientation and size before purchase

【Package Contents】Quantity: 2 flag hinges + 12 screws; Open width: 92mm*70mm*2mm; Leaf thickness: 2mm The hinges are thick and very hard, so they won't bend or break easily during use

High Quality Stainless Steel Material: The lift-off hinge is made of high quality 304 stainless steel, with a glossy brush finish, good abrasion resistance, moisture resistance, sturdy, rust resistance, and long lasting durability

Portable Design: The flag hinge can be rotated 270 degrees to open the cabinet door. The pull-out hinge can be easily removed after installation and replaced the door. The door side and frame sides can be easily separated, so it is easy to hang and maintain

【Easy Installation】1.Determine the mounting position of the pull out hinge first, use a pencil to trace the contours of the hinge 2. Use the flat chisel to engrave the mounting groove on the door frame and door leaf marking(the groove depth is the thickness of the hinge. If there is a burr, sand it with sandpaper. 3. When installing, place the long side of the opening and closing hinge on the door, and adjust the screw to the screw hole on the hinge and tighten with a screwdriver or other tool. Then connect the other end of the pull hinge in the same way to the door frame to secure it. After installing the plunger hinge, open and close the door to make sure the door is working smoothly. 4.Moreover, you need to check whether the door is not tilt, or the door gap is too big. If you have this problem, you will need to adjust the plug and unplug hinge mounting position in a timely manner

(Applications) Ideal lift-off hinges for home, office, or shops. Lift-off hinges can be used in a variety of ways. Suitable for installing doors, windows, cabinets, tool boxes, wooden boxes, jewelry boxes, etc

Made of sturdy steel material, anti-rust and anti-corrosion, durable and sturdy, not easy to bend or break

Use them to save a lot of space, make your home more clean and neat, perfect for projects

It is used as a large coffee table mechanism hardware mount furniture hinge with spring due to the large load capacity and can load about 50kg/100lb

With this kind of lift, you can turn a normal coffee table into a functional coffee table, and you can also use it to change the functions of other tables

Easy to assemble, just attach spring to the hinge, very easy to use

Package Includes: Quantity: 2 x Slotted hinges + 8 x Screws; Folding dimensions: 1.5 x 0.9 inches (37 x 22 x 9 mm); Opening width: 1.3 inches (33 mm); Leaf thickness: 0.08 inches (2 mm); Mounting hole size: 0.2 inches (4 mm); Maximum rotation angle: 270 degrees

High Quality Stainless Steel Material: The hinges are made of high quality 304 stainless steel, with a glossy brush finish, good abrasion resistance, moisture resistant, sturdy, rust resistant, and long lasting durability

(Portable Design) The opening and closing hinge can be rotated 270 degrees to open the cabinet door. A pull-out hinge is a pull-out hinge that can be easily removed after installation, so you can change the door. The door side and frame sides can be easily separated, so it is easy to hang and maintain

【Easy Installation】1.Determine the mounting position of the hinge first, use a pencil to trace the contours of the hinge 2. Use a flat chisel to carve the mounting groove of the hinge in the position of the door frame and door leaf. (groove depth is the thickness of the hinge. If there is a burr, sand it with sandpaper. 3. When installing, place the long side of the hinge on the door, align the screws with the hinge screw hole, tighten with a screwdriver or other tool. Next, connect the other side of the hinge to the door frame in the same way. After installing the hinge, open and close the door to ensure the door can be used smoothly. 4.Moreover, you need to check whether the door is not tilt, or the door gap is too big. If you have such a problem, you will need to adjust the hinge mounting position in a timely manner

Applications: Ideal hardware hinges for homes, offices, and stores. Hinge can be used in many ways. Suitable for installing doors, windows, cabinets, tool boxes, wooden boxes, jewelry boxes, etc

Set of 2 adjustable height lifts for door mounting, tile mounting, wall mirrors and more

Compared to existing tile locator, the weight capacity of 55.1 lbs (25 kg) has been significantly increased. Easy to fine-tune in 1mm increments by simply turning the grip

In addition, the simple design is lightweight, compact, and easy to carry. No more trash, mud or other debris getting stuck in place

Rollers on the fulcrum allow you to adjust the weight while still supporting heavy items. Rubber tips to keep doors and tiles in place

Size: 3.9 x 2.3 x 1.0 inches (9.8 x 5.8 x 2.5 cm); Set of 2; Weight: 5.3 oz (150 g); Material: Stainless steel; Weight Capacity: 55.3 lbs (25 kg); Adjustable Range: 0.4 - 2.3 inches (1.0 - 5.8 cm)

Material: Iron

Quantity: 2 pieces

建設、家の改修、木工店、または大規模なパネル輸送が必要な環境に最適です。

このリフティングツールは、負傷のリスクを減らしながら重い材料の効率的な取り扱いを確保します。

スチールで作られたこのボードリフターは、アンチスリップで耐摩耗性のある人間工学に基づいたハンドルを備えており、使用中の安全性を高めています。

ジプスムボード、木製パネルなどを簡単に持ち上げて輸送するボードリフターにより、時間とエネルギーを節約するための単一人の運用に適しています。

大規模なパネルを簡単に移動する必要がある専門の請負業者、愛好家、住宅所有者に適しています。