Lead2Amazon

Transmission frequency band: 470 - 710 MHz (UHF ch.13 - 52) 1032 - 3224 MHz (BS / CS) 1 Next voltage AC 100 V 50 / 60 Hz, Power consumption: 1.7 W / 3.5 VA output voltage (current) DC 5 V (1 A) Input / Output impedance 75 Ohm (F type) Power Supply: DC 5 V 0.24A / Operating Temperature Range 0 - +40°C / External Dimensions (H x W x D): 5.4 x 3.5 x 1.2 inches (137 x 89 x 31 mm) / Weight (Weight) Approx. 7.5 oz (210 g)

Frequency band: 470-710MHz
Gain: 10 - 35 dB
Gain adjustment range
Max: 25 - 35 dB
MID: 15 - 25 dB
MIN: 10 - 15 dB

Rated output level: 95dBμV (9 waves)
Noise Factor: Less than 8dB
VSWR: Less than 3

Input and output impedance: 75Ω
Power Supply: DC 5 V 0.3 A
Usable temperature range: 32 - 104°F (0 - 40°C)

Product Size (W x H x D): Approx. 4.0 x 1.7 x 0.9 inches (102.8 x 42.5 x 22.2 mm).
Weight: Approx. 2.4 oz (68 g).
Accessories: USB-A/USB-C cable (3.3 ft (1 m)

Paper box packaging.
Warranty: 1 year
Country of Origin: China

Transmission frequency band: 470 - 710 MHz (UHF ch.13 - 52) 1032 - 3224 MHz (BS / CS) / 1 Next voltage: AC 100 V 50/60 Hz, Power consumption: 0.9 W / 2.1 VA / Output voltage (current) DC 5 V (1A) / Usable temperature range 0 - ○ °C

12dB-20dB line booster for satellite BS/110 degree CS antennas, compatible with 3224MHz, 2K, 4K, and 8K For example, when it has been dampened using a distributor, etc. *Does not support BS/CS of terrestrial digital or cable TVs

When using a joint antenna, please turn on the power supply to the BS/CS antenna when the TV is turned off to activate the booster

The [Antenna Level] and [Reception Level] you can check on the TV screen will not increase the reception level even when using a booster. If the antenna is poor reception is heavily noise, it will amplify the noised, inferior environment. Due to the nature of the product, there may be cases of deterioration or attenuation depending on the radio wave reception environment. Please check the reception status of your antenna. When using a distributor, please install it to a place before distributing it using electrical compatible objects (parabolic antenna, this product (booster), distributor, TV, recorders, etc.)

When using this booster, please make sure to turn on the BS/CS antenna from the connected device side. *Installation direction (IN/OUT) is not bi-directed. If the installation position or direction is wrong, the power supply may cause attenuation. The reception environment of the customer is not improved. For details, please check the flowchart in the picture to confirm the location of installation, power supply and mounting connection direction

Product Contents: 4K8K compatible line booster x 1

Please contact the manufacturer directly for details such as U38A specifications and features. We do not accept returns or exchanges for the convenience of the customer after shipment. Thank you for your understanding

Use to increase the signal when the TV signal is weak or when you need to send TV signals to multiple TVs. Small enough to be attached to a horizontal mast

For outdoor use

Amplified band: UHF38dB

Set of 2 U38A (1 set contains 2 U38A)

Transmission frequency band: 470 - 710 MHz (UHF ch.13 - 52); Gain: 41 dB (38 - 44 dB); Noise index: less than 3 dB; Rated output level: 103 dBμV (9 waves); VSWR: 3; Input/Output impedance: 75 ohms (F type terminal); Usable temperature range: -20 ~+50℃ (Amplified part), -10 to +40 °C (Power supply) Power supply input voltage: AC 100 V 50 / 60 Hz; Power supply output voltage: DC 15 V (max. 0.57 A); Appearance dimensions (amplifier part): 3.4 x 4.3 x 2.1 inches (87 x 105 x 34 mm); Package weight: 20.9 oz (586

UHF Amplified Booster

Used to strengthen the signal when the TV signal is weak or when you need to send TV signals to multiple TVs

Small enough to be attached to a horizontal mast

Amplified band: UHF38dB

For outdoor use

A separated power supply home booster that supports BS, 110 degree CS broadcasting and terrestrial digital broadcasting including 4K8K satellite broadcast

Compact yet high performance, high gain, 45 dB type with convenient gain switch

This is an industry certification mark that has acquired HS (Hi-Shield) mark for quality and peace of mind

Each band is equipped with an input ATT, so it is suitable for a wide range of reception environments from strong to weak electric fields

External Size: Amplifier part: Approx. 3.6 x 4.6 x 2.0 inches (92 x 117 x 52 mm), Power supply part: Approx. 4.0 x 3.0 x 1.3 inches (101 x 77

Product Weight: Amplifier part: Approx. 10.6 oz (300 g), Power supply part: Approx. 7.1 oz (210 g)

Compatible mast diameter: approx. 0.6 - 1.9 inches (16 - 48.6 mm)

About receiving 4K8K satellite broadcasts... In order to receive 4K8K satellite broadcast, a 4K8K satellite receiver is required. In order to receive all channels of 4K8K satellite broadcasting, other receivers must be 4K8K satellite devices

Frequency band: 76-777 (MHz)

Gain: 76-222 (MHz): 11-14dB

Gain: 470-777 (MHz): 15-19 dB

Input Impedance: 75Ω

Output Impedance: 75Ω

Long Transmission Distance: The signal range expansion amplifier adopts time-split duplex (TDD) high-speed microwave detection technology and line g power amplification technology, which can greatly extend the RF distance without changing the transmission speed of 802.11b/g/n wireless devices

Low Noise Sensitivity: The signal amplifier has a 13dB transmission gain, 20 times the transmitter power and 2.5 dB noise factor to increase the reception sensitivity of the product and greatly extend the reception distance

CONVENIENT AND EFFICIENT: The wireless signal booster has 4000mW of transmitting power, which can greatly improve product coverage area. 6-16V super wide power supply voltage input range, very convenient engineering networking

Variable Frequency Band: The signal booster can scaling any 2.4G frequency band, suitable for TDD operating mode products

Excellent heat dissipation and easy to use: remote control signal booster can be plug and play without software setup Full metal shell, greatly improved heat dissipation performance