Lead2Amazon

Please be aware that there is a risk of copying products if the seller or delivery source is outside of Japan

Product Size (W x D x H): Approx. 6.3 x 3.7 x 4.6 inches (16 x 9.3 x 11.8 cm); Inner Dimensions: Handle Storage Compartment: Approx. W 2.0 x D 1.6

Quality indication: Body: Steel (powder coated)

Accessories: Gypsum board tweezers x 2, wooden screws x 2, cushions (small) x 4, cushions (small) x 4, mountable wall surfaces when using gypsum board pins such as wallpaper, cloth wallpaper, vinyl wallpaper, thin veneer wood screws, when using posts, plywood walls, printed plywood (where there is a horizontal sun on the back side)

Load Capacity: Approx. 3.3 lbs (1.5 kg) (static load capacity with zero shock). )

Size: 3.9 x 4.7 x 5.9 inches (W10 x D12 x H15 cm).

Product Material: Steel (Powder Coated).

Weight: 5.8 oz (165 g).

Made in China.

Note: load capacity: 2.2 lbs (1 kg).

Product size (W x D x H, approx.): 3.9 x 4.1 x 7.9 inches (10 x 10.5 x 20 cm); Interior dimensions: Cord storage (W x D x H): 1.6 x 0.8 x 1.4 inches (4 x 2 x 3.5 cm).

Quality indications: Main body: Steel (powder coating), magnetic; Non-slip: Silicone; Holder interior cushioning material: EVA resin.

Load capacity: 2.2 lbs (1 kg).

(Large Opening & Smooth Opening & Closing) The opening is large, so you can store it just by inserting it in order to save time and time for busy dressing. Convenient for travel. In particular, there is no need to open the opening, and you can remove the finished heating iron directly with one hand, so you don't have to worry about burns. The zipper is smooth, opening and closing smooth

Large Size & Hard to Fall: Compared to the commercially available products, this hair iron pouch is larger than 11.8 x 5.5 x 2.8 inches (30 x 14 x 7 cm), so it has a large storage space. There are 2 buttons on the top, so it will not fall off when you store your hair iron case. (Note: Please check your hair iron before purchasing. )

(2-way use) 1. For hanging: There are buttons on both sides, so you can hang the hair iron storage case on towel bars, storage wire racks, laundry racks, and hooks. It is easy to take out when using it. 2. For temporary storage space: Remove the zipper and use the hair iron case for temporary storage and to place the hair iron case during and after use. The stress of the damage is eliminated

(Can store power cords) There is a storage pocket for the power cord on the outside of the hair iron case, and the power cord can be rolled up and stored in the back pocket. The pockets have a wrinkled structure, so the storage space (approx. 8.9 x 4.5 inches (22.5 x 11.5 cm) after stretching, and it is easy to store large power cords

【High Quality Material】Made of high quality aluminum alloy material, lightweight, anti-rust and durable

【Silicone Pad Protection Design】The silicone pad of the hair dryer holder can prevent scratches and damage to the surface of the hair dryer

【Multi-functional Storage Design】The storage rack can store various styles of hair dryer and hair iron, and the hook can not only store hair dryer cables, but also can hang cleansing brush, hair dry cap, scissors, etc

Two Installation Methods: High adhesion force, can be directly attached with double-sided tape that does not require drilling. If you need more stability, you can also use screw holes for installation

Space-saving: It can be used to store hair dryer and bath accessories neatly and easily. At the same time, it can maintain its appearance and save space effectively

This hair dryer holder is suitable for home, hotel, university, apartment, bathroom, dorm room

Made of durable material, the storage holder is not easy to deform, break and can be used for a long time

You can easily put the hair blower holder in the storage bag when you are traveling outdoors,which makes it more convenient

The practical holder has a scientific structure that will not easily fall over when supported by it

Lightweight and small hair dryer holder is simple and minimalist style, which will not affect the overall beauty of the place

This hair dryer holder does not require any tools or screws to drill holes in the wall, just stick the enclosed strong seal on the wall and then hang the dryer holder body onto the seal

Rust and corrosion resistant, so you can use it safely in humid bathrooms and kitchens

The silicone pad on the dryer holder can prevent scratches and damage to the surface of the hair dryer

It is waterproof and load resistant, so you don't have to worry about the dryer falling off

Made of high quality material that is light and rust resistant for a long time

(Good Waterproof) The surface is not only smooth and beautiful, but also comes with a rubber pad to prevent scratches on the surface of the dryer

Fashion Design: It can neatly store your charging cable. Never worry about the dryer stand falling off

No Drilling Required: This dryer stand comes with adhesive and uses a 3M film sticker that provides peace of mind without worrying about it falling off. Simply peel and stick

【SPACE SAVING】Keep your hair dryer securely and keep your bathroom clean and tidy. Make your bathroom more fashionable and flattering

Easy to install: No tools or screws are required to drill holes in the wall. Simply peel and stick

Please be aware that if the seller or delivery source is outside of Japan, there is a chance of copying the product

Product Size (W x D x H): 4.3 x 4.7 x 13.2 inches (11 x 12 x 33.5 cm) (including strap); Product Weight: 3.2 oz (90 g); Inner Dimensions: Bottom (W x D x H): 3.7 x 2.0 inches (9.5 x 5 cm); Cord Slit: W 0.4 x H 7 inches (1 inches (18 inches (18 inches (18 inches (18 cm)

Quality indication: Outer Material: Polyester; Lining: Glass fiber

Load Capacity: 2.2 lbs (1 kg) (static load); Heat Resistance: 88°F (300°C) (lining only)

Compatible Sizes: Compatible hair iron, straight iron (mini iron). *Some items cannot be stored depending on the size and shape of the hair iron. Note: There may be slight differences in size due to sewing products

【High Compatibility】This dryer holder is compatible with all Dyson hair dryers, perfect storage of hair dryer and accessories, can be placed directly on the desktop, no need to install. Simple and stylish form is perfect for bathrooms, bedrooms, bathrooms, beauty salons, hair salons

Magnetic Design: The 3 nozzle storage ring of the Dyson Dryer Holder has a built-in magnetic suction design, so there is no need to match the nozzle of the hair dryer, and the magnet suction can be firmly adsorbed on the nozzle, making it difficult to fall off, making it very convenient to use

【Thickened Rubber Cushion】The top of the dryer stand is made of thick rubber cushion, which is soft, comfortable, non-slip, strong shockproof, can effectively protect the dryer from scratches when placing the dryer, U shaped design not only protects the dryer in all directions, but also easy to access, easy to use, and has a great creative design!

Stable Chassis: The dryer's restroom is made of high quality carbon steel, and the bottom is designed with a large chassis, and the rubber ring is added in the middle to protect your hair dryer accessories, and the center of gravity is more stable and difficult to fall over, so you can rest assured when storing your hair drier