Lead2Amazon

[Anti-Twist Function] The connection of the shower head can be rotated 360° freely, preventing tangling during use. You can enjoy the shower at your desired position without adjusting the angle of the shower head

[High Quality Electroplating Finish] Using high tech manufacturing process the plating layer is applied to make the plating layer more close and difficult to peel. The product is shiny, making it easy to clean every day

[Excellent Durability] The connection of the shower hose is precision machined with Grade A forged brass, making it sturdy and durable. The thread size is international standard G1/2 (equivalent to Japanese PJ1/2), making it easy to connect. The combination of stainless steel outer tube and PVC inner tube makes the hose lightweight and durable

[About Thread Size Compatibility] This hose only applies to a G1/2 mixing faucet and a g1/2 thread size showerhead. Even though the thread standard is G1/2 may not fit slightly, so before replacing the hose, please check the screw size of the part that connects to the hose and the shower head manufacturer

[Applicable mixing faucet manufacturer] The screw size on the side connecting this product is G1/2. This product can be mounted directly to LIXIL (INAX), SAN-EI, MYM mixing faucets. Other than the LIXIL (INAX) balance kettle, two bubble shower mixing faucet, and switch shower mixing faucet

[Applicable Shower Head Manufacturer] The screw size on the side that connects the shower head is G1/2. This product is compatible with TOTO, LIXIL (INAX) *Except the balance cauldron and can be attached directly to the San-EI and Kakudai shower heads. Some showerheads fit the screw size, but the o-ring at the base of the head may not be in the way and connect to the head. In that case, remove the o-ring at the base of the shower head. If water leaks occur after removing the o-ring, please add the included packing bag

[Mixing faucet manufacturer that requires adapter] This product cannot be installed directly to TOTO, KVK, INAX pot, Tokyo gas, Rinnai, Mittani, Osaka gas faucets, so you can use it with separate adapters. This product does not come with an adapter, please purchase a separate adapter

[Shower Head Manufacturer with Adapter] Does not fit directly into shower heads of KVK, MYM, or Gaster, so you can install it with an adapter. This product does not come with an adapter, please purchase a separate adapter

[Product Specifications] Hose length 1.6 meters Hose diameter Φ0.6 inch (14 mm) Thread size G1/2. Includes one thin washer of each thick packing

＜リファ、ミラブルに対応＞リファやミラブルなど、シャワーヘッドの交換に最適です。このシャワーホースはステンレスで光沢のあるシルバーカラーなので、お色を合わせてご購入ください。より高級感が出てスタイリッシュにまとまります。 ネジ規格も合っていて取付簡単！　国際基準のG1/2という規格を採用していますので、90%以上のシャワーヘッドと取り付けができます。　※KVKのシャワーヘッドをご利用の場合は、別途アダプタが必要になります。

＜互換性＞シャワーホースのネジ規格は、国際規格のG1/2を採用しており、国内の混合水栓メーカー8社、取付可能です。国内の混合栓の70%はそのまま取り付けができます。　KVK、TOTOの混合栓を利用されている方は、アダプタ付きのセットをご購入ください。　そのまま取り付けができるメーカーは、LIXIL(一部を除く)、MYM、カクダイ、グローエ、YOKO、ミズタニ、サンエイ、ノーリツ、他。　※一部取り付けができない場合があります。LIXIL,INAXのスイッチシャワー混合栓,バランス釜など2~30年以上前の混合栓は別途アダプタが必要になります。

＜日本規格のシャワーフックにぴったりフィット＞日本のシャワーフックの規格と合わないシャワーホースが多くあります。合わないホースを使うと、シャワーヘッドが落下して怪我の原因になったり、水圧でシャワーヘッドがフックから外れて浴室が水びたしになったりすることがあります。多くのシャワーホースのメーカーでは、このことが詳しく書かれていないので、注意が必要で日本のメーカー、販売者を選ぶことをお勧めします。

＜検査期間で測定、確かな耐久性＞専門の検査機関でメッキの厚さ測定をしました。素材は、内管にEPDMで厚さは1mm、ステンレス素材は0.13mm、ニッケルメッキ、クロムメッキとメッキ塗装をしており、光沢が綺麗で錆びにくいです。内管は、海外の信頼の高い有名企業から品質のいい内管を仕入れて組み立てをしているので、耐久性が高いです。

＜工具なしでも取り付け可能/女性でも取り付け簡単＞このシャワーホースは、工具なしでも取り付けができます。元々付いていたホースが固くて取れない場合は、ゴム手などをご用意ください。取り付け口に白いネジキャップがついているので、左回りに回して取り外します。黒いゴムパッキンがついていることを確認して混合栓と繋ぎます。シャワーヘッドも左回しで取り外して交換します。パッキンが入っていないと水漏れの原因になりますので、取り付け前にご確認ください。

Materials: PVC, brass, stainless steel, ethylene propylene rubber

Hose Connection Screw: Faucet Side Mount: G1/2 (with gasket) Shower Head Side Mount: G1/2

Product Dimensions (Hose Length): Approx. 5.9 ft (1.6 m)

Accessories: Instruction manual (English language not guaranteed)

Recommended water temperature: 11.2 - 104 °F (5 - 45 °C)

Stainless steel shower hose with international standard G1/2 threading (0.6 inch (14 mm) diameter). Easy installation and quick replacement. *Please make sure that the gasket (black rubber piece) is on the shower hose when connecting the hose.

Lightweight, flexible, and compatible with high-pressure shower heads.Features a luxurious feel unique to stainless steel hoses. The shower nut can be rotated 360° for comfortable use.

Compatible Manufacturers: (1) Can be connected as it is to the following types of shower heads (thread standard: G1/2): INAX (except those with a balance chamber), Sanei, Kakudai, Yuko (2001 and later); (2) Not listed: Please purchase separately.*The listed adapters are ones that connect the shower hose and the faucet.*May be difficult to connect if there is a resin attachment.

Cannot be installed on two-handle mixer taps without a balance chamber/check valve.Please check and make sure that the current adapter is removable before purchasing.

Water pressure may decrease if the outer diameter of your current shower hose is thicker than the diameter of this product.

Using two gaskets between the hose and the shower head may prevent leaks, but it can make turning the nut difficult.

Remarkable Softness: This product is incredibly soft and does not retain any odd shapes.It hangs smoothly.It extends straight right from the start during use.

Excellent Durability: The shower hose’s connectors are precision machined from grade A forged brass, providing sturdiness and excellent durability.The thread size is the international standard G1/2 size (equivalent to the Japanese PJ1/2 size) for easy connection.

Safety: Odorless, resistant to dirt, and hygienically antibacterial. Made from PVC material with a new manufacturing process, featuring a multi-layer explosion-proof structure that prevents hose bursts and leaks.

360° Free Rotation: The part that connects to the shower head is capable of 360° degrees of free rotation, allowing you to prevent the shower hose from getting tangled while you use it.

Elegance: Available in multiple colors.The simple and elegant design adds a refined and luxurious feel.It's a tangle-free and easy-to-use type.

Applicable Shower Head Manufacturers: The screw size on the side connecting this product to the shower head is G1/2.Compatible for direct installation with shower heads from OFFO, TOTO, LIXIL (INAX) *excluding balance boilers, SAN-EI, and KAKUDAI.You may be unable to connect the product to some shower heads that have the same thread size but also have an O-ring at the base that gets in the way.If that is the case, please remove the O-ring from the base of the shower head.If leakage occurs after you have removed the O-ring, please try adding the included gasket.This product comes with an adapter for KVK shower heads. If you are installing it on a KVK shower head, please use adapter K to connect it.

Applicable Mixer Tap Manufacturers: The screw size on the side connecting this product to the mixer tap is G1/2.This product can be installed directly on tub-and-shower combination faucets from LIXIL (INAX), SAN-EI, and MYM.*LIXIL (INAX) balance boiler, Two-Bubble Shower Mixer, and Switch Shower Mixer cannot be connected.The TOTO thick hose, TOTO thin hose, and KVK faucet can be connected using the included A, B, and C adapters.

Included Adapter: Accessory A: For connecting to TOTO faucet (thin hose).Accessory C: For connecting to a TOTO faucet (thick hose)Accessory B: For connecting to KVK faucets.Accessory K: For connecting to KVK shower heads.

--

Three modes can be switched between mist/regular/spot Fine bubbles are produced in all modes

KVK Genuine Shower Parts (Hose Connection Screws M22X2)

G1/2, W23-14 adapter included

Usable water pressure range (0.1 MPa - 0.3 MPa). When the water pressure exceeds 0.3 MPa, please decrease the pressure with a commercially available decompression valve

Twist Prevention: The part that connects to the shower head is capable of 360° degrees of free rotation, allowing you to prevent the shower hose from getting tangled while you use it.You can enjoy having a shower in your preferred position without having to adjust the angle of the shower head.

Excellent Durability: The shower hose’s connectors are precision machined from grade A forged brass, providing sturdiness and excellent durability.The thread size is the international standard G1/2 size (equivalent to the Japanese PJ1/2 size) for easy connection.The combination of a stainless steel outer tube and a PVC inner tube makes the hose both lightweight and durable.

Compatible Shower Head Manufacturers: The size of the thread at the end of this product that connects to the shower head is G1/2.This shower hose can be installed directly on shower heads from OFFO, TOTO, LIXIL (INAX) (*excluding shower heads for balanced-flue systems) SAN-EI, and Kakudai.You may be unable to connect the product to some shower heads that have the same thread size but also have an O-ring at the base that gets in the way.If that is the case, please remove the O-ring from the base of the shower head.If leakage occurs after you have removed the O-ring, please try adding the included gasket.This product comes with an adapter for KVK shower heads. If you are installing it on a KVK shower head, please use adapter K to connect it.

Compatible Tub-and-Shower Combination Faucet Manufacturers: The size of the thread at the end of this product that connects to the tub-and-shower combination faucet is G1/2.This product can be installed directly on tub-and-shower combination faucets from LIXIL (INAX), SAN-EI, and MYM.*The product cannot be connected to LIXIL (INAX) balanced-flue systems, 2-handle tub-and-shower combination faucets, or tub-and-shower combination faucets with shower switches.It can be connected to a TOTO large-bore tub-and-shower combination faucet, a TOTO small-bore hose, or a KVK faucet using the included A, B, or C adapter.

Adapters Included: Included accessory A: For connecting to TOTO faucets (small-bore hoses).Included accessory C: For connecting to TOTO large-bore tub-and-shower combination faucets.Included accessory B: For connecting to KVK faucets.Included accessory K: For connecting to KVK shower heads.

[Application] If the screw size of the shower head and shower hose connection is not suitable for you, please use the adapter inside. This product is only for connecting the shower head and hose. In case of leakage, please increase or decrease the included packing and waterproof tape to suit your needs

[Compatible Shower Head Maker] This product fits shower head with screw size. Compatible with some products from KAKUDAI, TAKAGI, SAN-EI, INAX, and some YuKO products

Compatible Hose Manufacturer: This product is compatible with M22 x 2 (such as KVK, etc.), W23 x 14 (MYM, etc.), M22 x 1.5 hoses (Tokyo Gas, INAX, and Rinnai). Please note that it does not fit Arespark, TOTO and LIXIL shower hoses Does not fit Noritz cookware

[NO TOOLS REQUIRED] Easy to install by hand without tools. Please read instructions before installation. Material: ABS Product Set Includes: Adapter, Seal, Waterproof Tape, O-Ring

[Inquiry window] In the unlikely event that there is a defective product, please feel free to contact us. Also, if you have any doubts about the screw size compatibility, please contact us

The hose length is about 1.5m in just the right length. Makes cleaning and cleaning your toilet a breeze

A set of gun showerheads, hoses, hooks, and branch faucets that can be used for cleaning diapers, cleaning floors, etc

Shower hooks simply hook to the low tank of the toilet. Comes with screws so you can mount it on the wall. The branch faucet is standard G1/2 (nominal 13), so it can be installed on most water pipes

The shower head is a gun type with high pressure and straight water sprays out. Wash it every day before cleaning or sticking to your toilet, and you can maintain a clean toilet bowl for years to come

The shower head and shower hook are made of stainless steel, and the branch faucet is plated with brass, and the hose is made of stainless steel wrapped in resin pipes

[Φ0.6 inch (16 mm) High Flow Outstanding Durability] Thick hose inner diameter provides a larger flow rate than ordinary shower hose. Even with high water pressure, it will not swell, deform, break, or leak. The stainless steel material is sturdy and can be used for a long time. It is made of metal, so it is odorless and mildew free. The sleek metal tone chrome plated finish makes it easy to match your bathroom and easy to maintain everyday

[Anti-Twist Function] The connection of the shower head can be rotated 360° freely, preventing tangling during use. You can enjoy the shower at your desired position without adjusting the angle of the shower head

[Excellent Durability] The connection of the shower hose is precision machined with Grade A forged brass, making it sturdy and durable. The thread size is international standard G1/2 (equivalent to Japanese PJ1/2), making it easy to connect. The combination of stainless steel outer tube and PVC inner tube makes the hose lightweight and durable

[How to choose a shower hose] Depending on the manufacturer, the bath faucet, shower hose and shower head screw sizes are different. If the screw size does not fit, it can lead to the inferior connection or leakage, so please check the faucet and shower head manufacturer before replacing the shower hose

[Applicable Shower Head Manufacturer] The screw size on the side that connects the shower head is G1/2. This product is compatible with TOTO, LIXIL (INAX) *Except the balance cauldron and can be attached directly to the San-EI and Kakudai shower heads. Some showerheads fit the screw size, but the o-ring at the base of the head may not be in the way and connect to the head. In that case, remove the o-ring at the base of the shower head. If water leaks occur after removing the o-ring, please add the included packing bag. Use the included adapter K to attach to your KVK shower head. Please purchase a separate adapter if you install it to the shower head of MYM, Guster. May not be installed in LIXIL (INAX) stop showers

[Applicable mixing faucet manufacturer] The screw size on the side connecting this product is G1/2. This product can be mounted directly to LIXIL (INAX), SAN-EI, MYM mixing faucets. The LIXIL (INAX) balance kettle, two bubble shower mixing faucet, and switch shower mixing faucet cannot be connected. A TOTO fine hose, KVK faucet, and TOTO large diameter mixing faucet can be connected using the included A, B, and C adapter

[Adapter Included] Accessory A: For connecting to a TOTO faucet (thin hose). Accessory B: For connecting to KVK faucet. Accessory C: For connecting to TOTO large diameter mixing faucets. Accessories K1: For connecting with KVK shower head