Lead2Amazon

[Anti-Twist Function] The connection of the shower head can be rotated 360° freely, preventing tangling during use. You can enjoy the shower at your desired position without adjusting the angle of the shower head

[High Quality Electroplating Finish] Using high tech manufacturing process the plating layer is applied to make the plating layer more close and difficult to peel. The product is shiny, making it easy to clean every day

[Excellent Durability] The connection of the shower hose is precision machined with Grade A forged brass, making it sturdy and durable. The thread size is international standard G1/2 (equivalent to Japanese PJ1/2), making it easy to connect. The combination of stainless steel outer tube and PVC inner tube makes the hose lightweight and durable

[About Thread Size Compatibility] This hose only applies to a G1/2 mixing faucet and a g1/2 thread size showerhead. Even though the thread standard is G1/2 may not fit slightly, so before replacing the hose, please check the screw size of the part that connects to the hose and the shower head manufacturer

[Applicable mixing faucet manufacturer] The screw size on the side connecting this product is G1/2. This product can be mounted directly to LIXIL (INAX), SAN-EI, MYM mixing faucets. Other than the LIXIL (INAX) balance kettle, two bubble shower mixing faucet, and switch shower mixing faucet

[Applicable Shower Head Manufacturer] The screw size on the side that connects the shower head is G1/2. This product is compatible with TOTO, LIXIL (INAX) *Except the balance cauldron and can be attached directly to the San-EI and Kakudai shower heads. Some showerheads fit the screw size, but the o-ring at the base of the head may not be in the way and connect to the head. In that case, remove the o-ring at the base of the shower head. If water leaks occur after removing the o-ring, please add the included packing bag

[Mixing faucet manufacturer that requires adapter] This product cannot be installed directly to TOTO, KVK, INAX pot, Tokyo gas, Rinnai, Mittani, Osaka gas faucets, so you can use it with separate adapters. This product does not come with an adapter, please purchase a separate adapter

[Shower Head Manufacturer with Adapter] Does not fit directly into shower heads of KVK, MYM, or Gaster, so you can install it with an adapter. This product does not come with an adapter, please purchase a separate adapter

[Product Specifications] Hose length 1.6 meters Hose diameter Φ0.6 inch (14 mm) Thread size G1/2. Includes one thin washer of each thick packing

[AMAZING SOFTNES] This product is super soft and has no deformation. Drapes smoothly Stretches straight from the start while in use

[Excellent Durability] The connection of the shower hose is precision machined with Grade A forged brass, making it sturdy and durable. The thread size is international standard G1/2 (equivalent to Japanese PJ1/2), making it easy to connect

[Safety] Odorless, stain resistant surface, hygienic and antibacterial. Adopts PVC material, a new manufacturing process with a multi-layer explosion-proof structure to prevent the hose from bursting or leaking

[360° Free Rotation] The connection of the shower head can be rotated 360° freely, preventing tangling during use

[Elegance] Multicolored Options Simple and elegant design, it gives off a sophisticated and luxurious look. Easy to use without intertwining

[Applicable Shower Head Manufacturer] The screw size on the side that connects the shower head is G1/2. OFFO, TOTOTO, LIXIL (INAX) *Excluding balance cooker, can be directly attached to San-EI and Kakudai shower heads. Some showerheads fit the screw size, but the o-ring at the base of the head may not be in the way and connect to the head. In that case, remove the o-ring at the base of the shower head. If water leaks occur after removing the o-ring, please add the included packing bag. This item comes with a KVK shower head adapter, but if you install it on a KVK shower head, please use adapter K to connect it

[Applicable mixing faucet manufacturer] The screw size on the side connecting this product is G1/2. This product can be mounted directly to LIXIL (INAX), SAN-EI, MYM mixing faucets. The LIXIL (INAX) balance kettle, two bubble shower mixing faucet, and switch shower mixing faucet cannot be connected. You can connect it using the included A, B, C adapter included with the TOTO thick hose, TOTO narrow hose, and KVK faucet

[Adapter Included] Accessory A: For connecting to a TOTO faucet (thin hose). Accessories C: For connecting to a TOTO faucet (thick hose). Accessory B: For connecting to KVK faucet. Accessories K: For connecting to KVK shower head

[2 Years Worry-Free Warranty] If there are any defects in accordance with our usage conditions within 2 years after purchase, please feel free to contact us. We provide the best products and service to our customers, and we guarantee the quality

[Anti-Twist Function] The connection of the shower head can be rotated 360° freely, preventing tangling during use. You can enjoy the shower at your desired position without adjusting the angle of the shower head

[Excellent Durability] The connection of the shower hose is precision machined with Grade A forged brass, making it sturdy and durable. The thread size is international standard G1/2 (equivalent to Japanese PJ1/2), making it easy to connect. The combination of stainless steel outer tube and PVC inner tube makes the hose lightweight and durable

[Applicable Shower Head Manufacturer] The screw size on the side that connects the shower head is G1/2. OFFO, TOTOTO, LIXIL (INAX) *Excluding balance cooker, can be directly attached to San-EI and Kakudai shower heads. Some showerheads fit the screw size, but the o-ring at the base of the head may not be in the way and connect to the head. In that case, remove the o-ring at the base of the shower head. If water leaks occur after removing the o-ring, please add the included packing bag. This item comes with a KVK shower head adapter, but if you install it on a KVK shower head, please use adapter K to connect it

[Applicable mixing faucet manufacturer] The screw size on the side connecting this product is G1/2. This product can be mounted directly to LIXIL (INAX), SAN-EI, MYM mixing faucets. The LIXIL (INAX) balance kettle, two bubble shower mixing faucet, and switch shower mixing faucet cannot be connected. The TOTO large diameter mixing faucet, TOTO thin hose, and KVK faucet can be connected using the included A, B, C adapter

[Adapter Included] Accessory A: For connecting to a TOTO faucet (thin hose). Accessory C: For connecting to TOTO large diameter mixing faucets. Accessory B: For connecting to KVK faucet. Accessories K: For connecting to KVK shower head

[2 Years Worry-Free Warranty] If there are any defects in accordance with our usage conditions within 2 years after purchase, please feel free to contact us. We provide the best products and service to our customers, and we guarantee the quality

[AMAZING SOFTNES] This product is super soft and has no deformation. Drapes smoothly Stretches straight from the start while in use

[360° Free Rotation] The connection of the shower head can be rotated 360° freely, preventing tangling during use

[Excellent Durability] The connection of the shower hose is precision machined with Grade A forged brass, making it sturdy and durable. The thread size is international standard G1/2 (equivalent to Japanese PJ1/2), making it easy to connect

[Safety] Odorless, stain resistant surface, hygienic and antibacterial. Adopts PVC material, a new manufacturing process with a multi-layer explosion-proof structure to prevent the hose from bursting or leaking

[Elegance] Multicolored Options Simple and elegant design, it gives off a sophisticated and luxurious look. Easy to use without intertwining

[Applicable Shower Head Manufacturer] The screw size on the side that connects the shower head is G1/2. This product is compatible with TOTO, LIXIL (INAX) *Except the balance cauldron and can be attached directly to the San-EI and Kakudai shower heads. Some showerheads fit the screw size, but the o-ring at the base of the head may not be in the way and connect to the head. In that case, remove the o-ring at the base of the shower head. If water leaks occur after removing the o-ring, please add the included packing bag

[Applicable mixing faucet manufacturer] The screw size on the side connecting this product is G1/2. This product can be mounted directly to LIXIL (INAX), SAN-EI, MYM mixing faucets. Other than the LIXIL (INAX) balance kettle, two bubble shower mixing faucet, and switch shower mixing faucet

[2 Years Worry-Free Warranty] If there are any defects in accordance with our usage conditions within 2 years after purchase, please feel free to contact us. We provide the best products and service to our customers, and we guarantee the quality

(Compatibility) The thread standard for shower hoses uses international standard G1/2, and can be installed by 8 domestic mixed faucets manufacturers. 70% of domestic mixing plugs can be installed as is. If you are using KVK or TOTO mixing faucets, please purchase a set with adapter. Direct fit manufacturers LIXIL (except some of the others), MYM, Kakudai, Grohe, YOKo, Missani, Sannei, Noritz and more. Some installation may not be possible. Mixing faucets from LIXIL and INAX switch shower mixing faucets and balance kettles are required for more than 2 to 30 years ago

(Perfect Fit for Japanese Shower Hooks) Many shower hoses do not meet the standards of Japanese shower hooks. If you use an inappropriate hose, the shower head will fall down and cause injury, or the water pressure may cause the shower head to fall off the hook and the bathroom will drain the water. Many shower hose manufacturers do not have this in detail so it is recommended to choose a Japanese manufacturer or seller with caution

(Measurement during inspection period, ensuring durability) The thickness of the plating was measured by professional laboratories. The inner tube is EPDM with a thickness of 0.04 inch (1 mm) and the stainless steel material is 0.005 inch (0.13 mm) and is nickel plated, chrome plated and plated, so it has a beautiful luster and rust resistant. The inner tubes are assembled with high-quality inner tubes from a trusted company overseas and are highly durable

(Can be installed without any tools / Easy to install) This shower hose can be installed without any tools. If the hose is originally attached to the hose that is hard and can't come off, please prepare rubber hands. White screw caps on the mounting port, turn left to remove Confirm black rubber gasket and connect with mixing faucet. The shower head can also be removed and replaced with the turn left side. Please check before installation, as there is no seal and water leakage

- Stainless steel shower hose with international standard G1/2 threading (0.55 inch (14 mm) diameter). It’s easy to install. *Please make sure that the gasket (black rubber piece) is on the shower hose when connecting it to your hose.

- Lightweight and flexible, this shower hose is compatible with high-pressure shower heads.The stainless steel hose offers a luxury feel and comfortable use with a shower nut that can rotate 360°.

- Compatible manufacturers: (1) Hose manufacturers with hoses that can directly attach to this shower head (thread standard: G1/2): INAX (except those with a balance chamber), Sanei, Kakudai, Yuko (2001 and later); (2) Not listed: Please purchase separately.The listed adapters are ones that connect the shower hose and the faucet*May be difficult to install on hoses with resin attachments.

- Cannot be installed on two-handle mixer taps without a balance chamber/check valve.Please check and make sure that the current adapter is removable before purchasing.

- Water pressure may decrease if the outer diameter of the current shower hose is thicker than this product.

- Using two gaskets between the hose and the shower head may prevent leaks, but it can make turning the nut difficult.

Material: The adapter is made of ABS material that is durable and will not corrode in contact with water for a long time

(Applications) Please use the adapter when your shower hose is not compatible with your shower head or when installing the shower head filter

Compatible shower hose brands: MYM, KYK, and (balance cooker), Tokyo Gas, INAX, and Rinnai TOTOTOTO

Compatible Shower Head Brand: Compatible with some KAKUDAI, TAKAGI, Arromic, TOTO, and some products from Sanei Faucet and INAX (Except Balance Kilon), and some YuKo products

No Tools Required: Can be easily installed by hand without tools

[Φ0.6 inch (16 mm) High Flow Outstanding Durability] Thick hose inner diameter provides a larger flow rate than ordinary shower hose. Even with high water pressure, it will not swell, deform, break, or leak. The stainless steel material is sturdy and can be used for a long time. It is made of metal, so it is odorless and mildew free. The sleek metal tone chrome plated finish makes it easy to match your bathroom and easy to maintain everyday

[Anti-Twist Function] The connection of the shower head can be rotated 360° freely, preventing tangling during use. You can enjoy the shower at your desired position without adjusting the angle of the shower head

[Excellent Durability] The connection of the shower hose is precision machined with Grade A forged brass, making it sturdy and durable. The thread size is international standard G1/2 (equivalent to Japanese PJ1/2), making it easy to connect. The combination of stainless steel outer tube and PVC inner tube makes the hose lightweight and durable

[How to choose a shower hose] Depending on the manufacturer, the bath faucet, shower hose and shower head screw sizes are different. If the screw size does not fit, it can lead to the inferior connection or leakage, so please check the faucet and shower head manufacturer before replacing the shower hose

[Applicable Shower Head Manufacturer] The screw size on the side that connects the shower head is G1/2. This product is compatible with TOTO, LIXIL (INAX) *Except the balance cauldron and can be attached directly to the San-EI and Kakudai shower heads. Some showerheads fit the screw size, but the o-ring at the base of the head may not be in the way and connect to the head. In that case, remove the o-ring at the base of the shower head. If water leaks occur after removing the o-ring, please add the included packing bag. Use the included adapter K to attach to your KVK shower head. Please purchase a separate adapter if you install it to the shower head of MYM, Guster. May not be installed in LIXIL (INAX) stop showers

[Applicable mixing faucet manufacturer] The screw size on the side connecting this product is G1/2. This product can be mounted directly to LIXIL (INAX), SAN-EI, MYM mixing faucets. The LIXIL (INAX) balance kettle, two bubble shower mixing faucet, and switch shower mixing faucet cannot be connected. A TOTO fine hose, KVK faucet, and TOTO large diameter mixing faucet can be connected using the included A, B, and C adapter

[Adapter Included] Accessory A: For connecting to a TOTO faucet (thin hose). Accessory B: For connecting to KVK faucet. Accessory C: For connecting to TOTO large diameter mixing faucets. Accessories K1: For connecting with KVK shower head

[Excellent Durability] The connection of the shower hose is precision machined with Grade A forged brass, making it sturdy and durable. The thread size is international standard G1/2, which makes it easy to connect

[High Quality] High quality stainless steel outer tube, PVC inner tube, anti-corrosion, good flexibility

[360° Free Rotation] The connection of the shower head can be rotated 360° freely, preventing tangling during use

[High Quality Electroplating Finish] Using high tech manufacturing process the plating layer is applied to make the plating layer more close and difficult to peel. The product is shiny, making it easy to clean every day

[3 Year Worry-Free Warranty] If there is any defects in accordance with our usage conditions within 2 years after purchase, please feel free to contact us. We provide the best products and service to our customers, and we guarantee the quality

[Mountable Faucet Manufacturer] This product is compatible with products that have G1/2 nuts. Compatible with some Arespark, KAKUDAI, TAKAGI, TOTOTO, some SAN-EI, INAX, and some YuKO products

[Mountable Shower Head Maker] This product is compatible with products that have G1/2 nuts. Arespark, TKS, TOTOTO, SAN-EI, KAKUDAI, LIXIL (INAX) *LIXIL (INAX) excludes shower with a stop button

Accessories: Sealing tape

[High Pressure Premium Shower Head] The durable, comfortable and safety of the handheld shower head kit is guaranteed by scratch resistant ABS pearlescent panel, polished chrome plated surface, anti-lime silicone nozzle, stainless steel leak proof shower hose, and angle adjustable shower arm bracket with swivel ball

[6 SPRAY SETTING SHOWER HEAD HANDHELD] Newentor Premium Style Powerful Shower Head has 6 Spray Settings. Spray, Massage, Mist, Mist+Spray, Spray+Massage, Mist+Massage Suitable for hairwash, gentle shower, massage, bath of kids and pets, bathroom cleaning etc. The Pelagia Pressure Increased Shower Head provides an overall refreshing shower experience from head to toe

【SHOWER HEAD WITH HOSE】 The special button design of the high pressure handheld shower head allows you to easily change the spray settings with one hand. Provides pressure relief and a pleasant bath for children and pets

[Advanced Shower Head and Handheld Spray High Pressure] High-density 304 stainless steel tube design keeps hose flexible and kick free. Nylon braided hose prevents bursting and leakage. Both solid brass hose connectors are standard size, suitable for most removable showerheads with G1/2" end

【Ergonomic Detachable Shower Head with Long Hose】The crisp square shape of the high flow shower head covers the water perfectly and evenly. You and your whole family will enjoy a luxurious shower. The handheld shower head with extra-long hoses meets water efficiency and performance standards and reduces water use without sacrificing high pressure performance