Entry model that allows you to fully experience the functionality of the Fusion series. Warm up time with excellent work efficiency
Power consumption: 1350W (50/60Hz) Processing Speed: 16.3 inches (415 mm) per minute (50 Hz), 19.7 inches (500 mm) per minute (60 Hz)
Touch the power button and the indicator flashes sequentially, and the warm up mark "cmx"(red) will light up. Touch the setting button according to the thickness of the film you use and select the setting code and the setting light will light up on the set button
When warm-up is completed, the warm up mark "cmx"(red) will disappear and the processable mark "✔"(green) will light up to notify you that it can laminate
Equipped with auto shut-off function. It will automatically shut off if you do not use it for more than 30 minutes while the power is on. If you want to use it again, you can use it by touching the power button to turn it on
If the film is clogged up, simply press the release button down firmly with one hand and pull the clogged film back from the film insert. Rollers stop rotating, and the film can be pulled out. Rollers will automatically resume forward rotation after being pulled out
Product size: (W) 19.7 x (D) 5.9 inches (500 x 150 mm) (if there is a support tray, 12.6 inches (320 mm) x (H) 4.1 inches (105 mm). Weight: 5.5 lbs (2.4 kg)
Processing Width: A3 size compatible (not compatible with A3 saw sizes). Number of Rollers: 2
Compatible processing film thickness: 75-100μm. Maximum Lamination Thickness: 0.02 inch (0.6 mm)
Warm-up time: Approximately 60 seconds (when set T1)