Depending on the environment of use, this product may not produce any results you expect from the product. This product does not improve reception radio waves. This product amplifies radio waves (including unnecessary radio noise. Please be sure to check all the product description images before purchasing. Amplifies radio waves when BS/CS antennas are weak. It works by using electricity transmitted from TV or other booster When using this product, make sure to set the "Supply BS/CS Antenna" from the "Antenna Settings" on the TV or recorder. Amplifies radio waves when BS/CS antennas are weak. It works by using electricity transmitted from TV or other booster When using this product, make sure to set the "Supply BS/CS Antenna" from the "Antenna Settings" on the TV or recorder
The switch on the main unit should be turned on if there is no power supply to the antenna in a detached home, or when it is a joint reception such as an apartment (if you do not send an current) or turn off. In addition, when using, please connect the cable at a distance close to the BS antenna. The longer the distance of the cable connected to the BS antenna, the better amplification is not affected by noise or other reasons. Both BS antenna and line booster are a device that requires power supply. If the lamp is on and not working at all, the line booster may have electricity but not enough power to work to the BS antenna. Please purchase a booster power supply and adjust the power to work with the Line Booster BS antenna
High shield construction with current cut switch Supports 4K8K (frequency bandwidth 1000-3224MHz) for BS/CS-IF amplification Overlapping Power: DC 9.5 - 16.5 V, Gain: 18 - 20 dB, Rated Output: 90 dB (24 waves), Accessories: 4 mounting screws, 1 double-sided tape
The "Antenna Level" and "Reception Level" on the TV screen are intended to adjust the orientation of the antenna, and are converted to this C/N ratio. (*The method of conversion varies depending on the model) The "antenna level" and "reception level" displayed on this TV do not represent the terminal voltage that the booster is amplified, so the number of reception levels may not only increase the value of the booster gain. In addition, when the antenna is poorly received quality, the booster will not increase the antenna level or reception level on the TV. Please use a level checker to measure the terminal voltage correctly. When using with a scaper, please make sure that the antenna is compatible with the scraper first. If the antenna is not compatible, it will not look great even when amplified. If the input and output are reversed, it will not work properly. Connect the cable from the BS antenna to the input side and cable from the TV to the output side
This product is for indoor use. Not for outdoor use. In the following situations, use of boosters may not be effective. If a BS/CS antenna is received through glass, if there are obstacles in the direction of the antenna, the reception direction is misaligned, and the BS/CS antenna reception is poor. When the signal level drops too much in the reception path from the BS/CS antenna to the input of this booster. If the signal quality of the input of this unit is degradated (when the input C/N value is lower). In the condition of the antenna reception quality is poor, even if you use the booster to use it, the reception level will not increase. In high noise, the noise will amplify the noise, so please check the condition of the antenna. This product is only for BS/CS bands. Terrestrial digital, UHF bandwidth and FM and VHF bands are not amplified. This product requires the current sent from a TV