Lead2Amazon

■ This is a 0.5L (500ml) size

Motorcycle brake fluid optimized for motorcycle brake systems and improved product

(Includes check valve) The most important way to deflate the air with a one-way valve means you don't have to worry about the return of air

(Excellent Stability) Comes with a hook so you don't have to worry about the tank falling over while working and the brake fluid will scatter

Suitable Size: Tank Capacity: 33.8 fl oz (1,000 ml). The right size makes it easy to handle

Easy to Operate: No compressor is required, so you can easily replace brake fluid at home. One Man Bleeder!

Product information: The package contains 5 sight glasses and 5 sealing rings. Sight glass diameter is 18mm and fits a universal front or rear brake cylinder Comes with appropriate gasket to seal brake fluid

(Better Maintenance) When it cracks or cloudy and is hard to check the oil condition, you can replace the check window to repair the master cylinder of your motorcycle. If the window is deteriorated, the oil may bleed out, so we recommend replacing it as soon as possible. If you ask a specialist shop to repair them, you will be able to replace the master cylinders and the repair costs may be expensive, so we recommend replacing this product if you use a check window

【High Quality】Made of high quality iron + rubber material, durable and long lasting. Professionally manufactured for superior braking performance This is a good replacement for your old Master Brake Reservoir Sight Mirror Gasket

Easy to install: 1. Remove the old peek window. 2. Place the O-ring in the hole of the sight glass and push the sight glass parallel to the hole. 3. Use a hammer or clamp to knock it little. 4. Finally, make sure the brake fluid does not leak

【Applicable Scope】Fits most of old Honda, Suzuki, Kawasaki, many dirt bikes, Harley and many other brake cylinders. Please check product compatibility before purchasing, and allow 1-3mm error due to manual measurement

[Features] Brake fluid supplement is a dedicated tank that can be installed in the tank to replenish fluid when changing brake fluids. While deflating the air and pouring the brake fluid into the tank. No need to repeat checking your reservoir while working

Applications: Suitable for replacing brake oil for most cars, motorcycles, and large motorcycles

【Practical Design】Sloped spout design is suitable for working in narrow spaces of oil tanks. It is very convenient and stable to use when screwed. Includes a flow control cock, so you can adjust the amount of refill and prevent fluid leaks when removing it

(Large Capacity) With a large capacity of 3.3 gal (1 L) to avoid unnecessary troubles

Service: ZKTOOL aims to provide the most professional and most complete automotive repair tools and service in the auto repair industry and ensure our quality is reliable. If you have any questions, please contact us by email. We will give you the best solution

Product Specifications: One-way valve x 1, hoses x 2, hose clamp x 2

Product Size: Motorcycle Bleeder Hose, Valve: Length 2.1 inches (52.8 mm), Inlet Hose: Length 5.9 inches (150 mm), Outlet Hose: Length 14.2 inches (360 mm)

【High Quality Material】Material: Aluminum + Rubber, durable high quality material, safe and environmentally friendly, easy to install

Wide range of uses: Compatible with most models with hydraulic brakes, efficiently removes brake fluid from motorcycles, bicycles, and automobiles for easy and quick discharge

【Easy to Use】Easy to connect and pump operation with check valve to prevent backflow

[Product] This product is a motorcycle brake cleaning tool. It can quickly and conveniently clean your motorcycle brakes, and it has a valve body to prevent air from entering your motorcycle's internal system

Material: Made of aluminum alloy, it is resistant to brake fluid corrosion and can be easily cleaned. All tubes are rubber tubing (PVC material)

(Size) Valve Length: 2.0 inches (52.8 mm); Inlet Pipe Inner Diameter: 0.2 inches (4 mm); Outer Diameter: 0.2 inches (6 mm); Pipe Thickness: 0.04 inches (1 mm); Length: 5.9 inches (150 mm); Outer Diameter: 0.3 inches (5.5 mm); Pipe Thickness: 0.06 inches (8 mm); Length: 1.2 inches (360 inches (360 mm)

【Easy Connection】: The clip makes it easy to connect to your bike clutch and bleeding

(One Way Check Valve) Designed with a non-return valve to prevent the flow of air into the system and prevent the old brake fluid from returning

[Features] P-grade version brake fluid tester water volume gauge can be used to test the percentage of water from DOT3, DOT4, DOT5, ENV6ENV4 brake fluid. It has faster and more accurate reading capabilities compared to similar products and is much more wider

【LED Lights】5 LED lights show the percentage of water in the brake fluid in 3 colors: green, yellow, and red. Easily grasp the percentage of moisture contained in the brake fluid and consider whether to replace brake fluid

Convenient: The brake fluid tester tool is simple and convenient. It only takes seconds to check the quality of your vehicle's brake fluid. It is small and easy to carry, making it a must have. It also automatically shuts down when not in use within 12 seconds, saving battery. (Requires 1 AAA / 1.5V battery. Not included)

【Quality】The new brake fluid fluid tester pen is the perfect tool for updating after researching many times of similar products on the market. Read more accurate during testing. At the same time, its shell material is made of high quality nylon compared to ABS material. Products are more corrosion resistant and have a longer service life

Service: ZKTOOL aims to provide the most professional and most complete automotive repair tools and service in the auto repair industry and ensure our quality is reliable. If you have any questions, please contact us by email. We will give you the best solution

Capacity: 33.4 fl oz (1,000 ml), Color: Blue

Easy to assemble, just replace and tighten the old motorcycle rear pump cover

Brake case cover is made of high quality CNC aluminum with excellent abrasion resistance, scratch resistance, shock resistance, corrosion resistance, very durable and practical

The fuel tank cap has an excellent sealing effect, which can effectively prevent dust from entering the fuel system

Fashion design, good workmanship appearance, suitable for your bike

With its cool appearance and technical design, it stands out from the crowd

This supplement installs in the reservoir to automatically supply fluid when replacing brake fluid or deflating

The tightening stays allow for peace of mind

It also includes a flow control cock to prevent fluid leakage when removed

You can do it without worry

[Product Details] Size (approximate): Diameter 4.3 inches (11 cm) x Height 11.4 inches (29 cm). *Please refer to the images for details on each part; Weight (approximate): 1.4 oz (41 g); Tank Capacity: 33.8 fl oz (1,000 ml)