Lead2Amazon

A 3-in-1 set of compounds for paint/substrate treatment and polishing.

Features: This set of mini-sized polishing agents includes a coarse grit compound for substrate treatment and rust removal, a fine grit compound for repairing scratches and polishing, and an ultrafine compound for creating a mirror finish.Using the fine and ultra-fine compounds in sequence gives a shiny finish to paint repairs.

Uses: For removing scratches, hard water spots and tar from your car’s paint job.For polishing and waxing your car after a paint touch-up.For cleaning painted metal surfaces on motorcycles and bicycles.For removing rust from camping, golfing, or skiing equipment.

Specifications: Coarse – Average Grain Size = 500 microns; Fine – Average Grain Size = 2 microns; Ultrafine – Average grain size = 1 micron. Each tube contains 0.8 fl oz (25 g).

Punctured tire repair with no car jack required.

Tire puncture emergency repair for medium and large motorcycles.

Size: 3 x 2.8 x 8.3 inches (75 x 70 x 210 mm).

Amount: 10.1 fl oz (300 ml).

Seals radiator holes and prevents leaks

[Features] Seals holes with the function of ultra-fine fibers and resin contained in the components. Only the parts that are exposed to the outside air will harden, so the residues inside the radiator circulate without clogging

[Uses] Simply pour into the radiator to repair leakage areas. If kept in advance, immediately stop leaks after a leakage. Permanent repairing means no leaks when you replace the coolant water again

[Specifications] 1 x radiator capacity (~2.5 gal (10 L)) *Additive rate can be used up to 3% or up to 2 pieces; Please use 1 product for light and regular cars; Shake the container thoroughly and stir it thoroughly and pour the water after injection

Caution for Use: Stop the engine and allow the radiator to cool it down enough to work with super coolant; Cannot be used with Toyota Century, imported cars, cooling systems with filtration devices, and Honda Dual Cab vehicles. Cannot be used with cars that have a filter for water circulation. Does not affect holes or cracks of water from all holes and cracks. Not in radiator. If the coolant fluid is dirty, please make sure to clean the interior with radiator cleaning agent (Holtz SpeedFlash MH304 or MH317) to remove water strains, dirt, and rust and add a new coolant. If the dirt does not fall off even when using a cleaning agent, please refrain from using this product. Please be careful to reduce the cooling fluid until the leak stops

Scratch-removing, polishing, and mirror-finishing, 3 steps to shine your new car

[Features] This is a small capacity liquid polish set with a fine grain for substrate treatment and scratch removal, ultra-fine for mirror finishing, and ultra-fine mirror polishing. By gradually polishing, it reduces work time and has excellent finish

[Uses] Glaze on painted surfaces and after repainting of the car body paint; Removes migrains and car washes; Removes water spotles; Treating foundation before waxing

Ultra fine is made of alumina particles, super mirror polishing agent. Ultra fine particles finish the car body like a mirror

[Specifications] [Fine] Average particle diameter size = 7 microns (equivalent to #2300); [Ultra fine] Average particle diameter size = 1 micron (equivalent to #8000); [Ultra fine] Average particle diameter size = 0.2 microns (#17000) equivalent) 80ml each

[Convenient Tools] Polishing Cloth (MH961, 962); Compound Block (MH380); 2P Sponge for Compounds, (MH383)

Synthetic ester, MCA and fluorine resin formula, barium free, water replaceable

On-road and off-road use

Prevents noise and provides a light run. In addition to being "non-sticky, splash-resistant", it is permeable, rust resistant, (water replaceable/barium free), and has excellent lubrication sustainability, and excellent usability

A semi-wet type chain lube that combines the best of wet and dry lube

Lubricates chains for bicycles, motorcycles, cars, carts, industrial machinery, etc

Made by trusted Bosch from one of the world's leading automotive parts suppliers (genuine Bosch Japan. Please be aware of parallel import goods and counterfeit products. )

[Specifications] Domestically produced idling stop car/charging control car/regular car/maintenance free battery [5 hour rate capacity] 46Ah [Cold cranking current (CCA)] 500A

Compatible replacement formats: N-55, 46B24L, 50B24L, 55B24L60B24L, 65B24L, 70B24L, 75B24L, 80B24L

[Compatible with Idling Stop Vehicles] Honda: Vesel/Step Wagon [RK] / Shuttle [GK] Suzuki Solio [MA] / Swift [Z]

Product Size: Length: 9.4 inches (238 mm), Width: 5.0 inches (128 mm), Height: 8.0 inches (202 mm), Total Height: 8.8 inches (224 mm)

Material: Body: Polyester, other (uses flame retardant material); Curtain Rail: Aluminum (top)/ABS resin (bottom)

Product Size: Approx. W 19.7 x H 18.5 inches (W 50 x H 47 cm); Quantity: 2 pieces *Estimated window frame height 17.7 - 20.9 inches (45 - 53 cm); Stretchable; Color: Black

Set Includes: 2 curtain fabric panels with embroidered belts, 2 aluminum rails, 2 ABS plastic tracks, 2 belt stoppers, 6 rail stoppers

Color: Black

◆Orders placed before AM10 o'clock are shipped on the same day (excluding holidays)

Maximum load capacity: 2t (maximum lift weight: 19.6 KN); Minimum / Maximum ground height: Approx. 3.3 inches (85 mm) (when using included saddle): Approx. 4.5 inches (115 mm) / 13.2 inches (335 mm) (14.4 inches (365 mm) when using included saddle) / Stroke: Approx. 9.8 inches (250 mm)

Product Size: Approx. W 20.9 x H 5.5 x D 8.4 inches (W 530 x H 140 x D 214 mm); Handle Size: Approx. 19.7 inches (500 mm); Total Length After Handle Mounted: Approx. 38.6 inches (980 mm); Saddle Size: Approx. Diameter 2.4 x 0.7 inches (60 x 18 mm)

Operating oil: hydraulic lubricant (ISO VG32); Oil quantity: approx. 3.9 fl oz (115 cc); Usable temperature range: -4°F to 140°F (-20°C to 60°C); Material: Main unit: Steel; Color: Blue

Accessories: Handle; Attachment; Saddle (1.2 inches (30 mm) UP)

Putty for repairing scratches, dents, and holes on the body of your car for a quick drying putty that is highly adherent and impact resistant, as well as excellent shrink resistance

Applications: For repairing holes caused by rust and rust on the body of cars and motorcycles. Repair cracks and chips on FRP products such as spoilers, plastic models, etc

[Specifications] Curing time: 15 minutes (20 °C); Working temperature: 24 - 88°F (10 - 30 °C); Heat resistant temperature: 350°F (170 °C); Color tone putty: light gray, hardener: blue, hardening agent: light blue; Compatible materials: iron, stainless steel, aluminum, and other metals, non-ferrous metal

Convenient Tools: Sanding block (MH937), putty receipt sheet (MH935), water-resistant sandpaper